Optimization of Enhanced Oil Recovery via Polymer Flooding in Low-Permeability Reservoirs: A Numerical Simulation Approach
Table Of Contents
Chapter ONE
INTRODUCTION
- 1.1Introduction
- 1.2Background of Study
- 1.3Problem Statement
- 1.4Objective of Study
- 1.5Limitation of Study
- 1.6Scope of Study
- 1.7Significance of Study
- 1.8Structure of the Research
- 1.9Definition of Terms
Chapter TWO
LITERATURE REVIEW
- 2.1Historical Perspective of Enhanced Oil Recovery
- 2.2Polymer Flooding Fundamentals
- 2.3Polymer Properties and Rheology
- 2.4Low-Permeability Reservoir Challenges
- 2.5Numerical Simulation in EOR
- 2.6Reservoir Characterization Techniques
- 2.7Polymer-Reservoir Interactions
- 2.8Laboratory Experimental Methods for Polymer Flooding
- 2.9Field Case Studies of Polymer Flooding
- 2.10Economic and Environmental Considerations
Chapter THREE
SYSTEM DESIGN AND IMPLEMENTATION
- 3.1Research Design and Framework
- 3.2Data Collection and Sources
- 3.3Reservoir Model Development
- 3.4Governing Equations and Assumptions
- 3.5Numerical Methodology and Discretization
- 3.6Polymer Flooding Model Implementation
- 3.7History Matching and Model Calibration
- 3.8Sensitivity and Uncertainty Analysis
- 3.9Validation with Experimental/Data Sets
- 3.10Simulation Scenarios and Parameter Study
Chapter FOUR
SYSTEM TESTING AND EVALUATION
- 4.1Baseline Reservoir Simulation Results
- 4.2Polymer Flooding Performance Metrics
- 4.3Sweep Efficiency and Mobility Control
- 4.4Effect of Polymer Concentration and Molecular Weight
- 4.5Impact of Adsorption and Retention
- 4.6Viscosity Contrast and Donnan-Like Effects in Low-Permeability Rocks
- 4.7Economic Evaluation: Incremental Oil, CPP, and NPV
- 4.8Practical Guidelines for Field Implementation
Chapter FIVE
SUMMARY, CONCLUSION AND RECOMMENDATIONS
- 5.1Summary of Findings
- 5.2Conclusions
- 5.3Contributions to Knowledge
- 5.4Recommendations for Future Research
- 5.5Limitations Revisited
- 5.6Final Remarks
Project Abstract
Polymer flooding presents a viable pathway to significantly enhance oil recovery in low-permeability reservoirs by improving sweep efficiency and displacing residual oil through viscosity modification and favorable mobility ratio control. This study develops a robust numerical simulation framework to evaluate the performance of polymer flood strategies in heterogeneous low-permeability formations, integrating reservoir-scale flow physics, polymer transport dynamics, and economic optimization. A compositional multiphase flow model is extended to incorporate non-Newtonian polymer rheology, shear-thinning effects, adsorption, retention, degradation, and screen-factor limitations encountered in tight rocks. The governing equations include mass conservation for water, oil, and polymer, coupled with Darcy-scale momentum balance and a Preis-Equations based treatment of polymer mobility, enabling accurate representation of polymer slug behavior, breakthrough timing, and endpoint recovery. The research emphasizes the impact of reservoir heterogeneity, capillary pressure, relative permeability curves, and initial water saturation on polymer distribution and sweep efficiency, with particular focus on low-permeability channels, fractures, and packing effects that commonly constrain displacement efficiency. A comprehensive upscaling strategy links pore-scale polymer-adsorption phenomena to continuum-scale parameters, supported by laboratory data for polymer retention, permeability reduction, and coreflood results across a spectrum of brine salinities and polymer types. The numerical scheme employs an implicit pressure- and explicit saturation- (IMPES) based solver with adaptive time stepping, enhanced by a modular solver architecture that allows sensitivity analyses across polymer concentration, molecular weight, and injection strategy (single- vs. multi- slug with preconditioning fluids). Parameter uncertainty is addressed through a probabilistic framework, utilizing Latin hypercube sampling and global sensitivity analysis to identify key drivers of recovery performance and to quantify risk under field-scale extrapolation. The study also incorporates economic considerations, performing a discounted cash flow analysis to compare polymer flooding against conventional waterflooding and alternative EOR methods, accounting for polymer costs, chemical availability, and operational constraints such as injection pressure limits and surface facility capacity. Validation is performed against benchmark benchmarked synthetic models and available field data, ensuring the model captures breakthrough behavior, viscosity variation, and performance penalties associated with adsorption and degradation. Expected outcomes include a set of optimized polymer flood design guidelines for low-permeability reservoirs, including recommended polymer concentrations, injection strategies, and timing relative to primary and waterflooding stages, as well as a framework for rapid screening of reservoir candidates. The study aims to provide a transferable tool for engineers to assess the feasibility and design of polymer EOR projects, enabling improved displacement efficiency, reduced water cut, and extended well life while maintaining economic viability in challenging tight rock environments.
Project Overview
What This Project Is About
A simple study of how polymer flooding can help extract more oil from tight rock formations where water alone doesnβt move oil well. The project uses computer simulations to test different polymer choices and injection strategies to see which setup recovers more oil without excessive costs.
The Problem It Addresses
Many oil reservoirs have low permeability, meaning fluids move slowly. Traditional water flooding leaves a lot of oil behind. This project investigates a way to thin the injected water with long-chain molecules (polymers) to push oil more effectively and cheaply, reducing waste and environmental impact.
Objectives of the Project
- Understand the basic idea of polymer flooding and why it helps in low-permeability rocks.
- Learn how to set up a simple numerical model to simulate oil and water flow with polymers.
- Compare different polymer types and injection schemes to find which gives better oil recovery.
- Assess the economic and practical feasibility of the simulated methods.
What You Will Do Step by Step
1) Review basic concepts of oil recovery and polymers in plain terms.
2) Build a simple computer model that mimics oil and water movement in a porous rock with polymer added.
3) Run simulations using different polymers and injection rates.
4) Analyze results to see which setup recovers more oil with reasonable cost.
5) Discuss limitations and real-world considerations for field use.
Expected Outcome
A clear, beginner-friendly demonstration that polymer flooding can increase oil recovery in tight rocks, with practical guidance on which polymers and strategies look most promising from the simulations.