Optimization of Enhanced Oil Recovery using Nano-Fluid Assisted Polymer Flooding in Mature Reservoirs

 

Table Of Contents


Chapter ONE

INTRODUCTION

  • 1.Introduction
  • 1.1Introduction
  • 1.2Background of Study
  • 1.3Problem Statement
  • 1.4Objective of Study
  • 1.5Limitation of Study
  • 1.6Scope of Study
  • 1.7Significance of Study
  • 1.8Structure of the Research
  • 1.9Definition of Terms

Chapter TWO

LITERATURE REVIEW

  • 2.Literature Review
  • 2.1Theoretical Foundations of Enhanced Oil Recovery
  • 2.2Polymer Flooding: Principles, Technologies, and Advancements
  • 2.3Nano-Fluid Technology in EOR: Mechanisms and Applications
  • 2.4Polymer-Nano Fluid Interactions in Reservoir Fluids
  • 2.5Thermal Effects on Polymer and Nano-Fluid Systems
  • 2.6Surfactants and Wettability Alteration in Conjunction with Nanofluids
  • 2.7Porous Media Transport and Flow in Mature Reservoirs
  • 2.8Case Studies: Nano-Fluid Assisted Polymer Flooding in Mature Reservoirs
  • 2.9Economic and Environmental Considerations in EOR with Nanofluids
  • 2.10Gaps in Literature and Research Opportunities

Chapter THREE

SYSTEM DESIGN AND IMPLEMENTATION

  • 3.Research Methodology
  • 3.1Research Design
  • 3.2Study Area and Data Acquisition
  • 3.3Material Preparation: Polymer Solutions and Nano-Fluid Synthesis
  • 3.4Characterization Techniques (Rheology, Stability, Size, Zeta Potential)
  • 3.5Core Flood Experiments: Experimental Setup and Procedures
  • 3.6Rock and Fluid Property Measurements (Porosity, Permeability, Connate Water)
  • 3.7Experimental Design for EOR Scenarios
  • 3.8Numerical Modeling Framework and Simulation Tools
  • 3.9Data Analysis and Statistical Methods
  • 3.10Sensitivity and Uncertainty Analysis
  • 3.11Environmental, Health, and Safety Considerations

Chapter FOUR

SYSTEM TESTING AND EVALUATION

  • 4.Findings and Discussion
  • 4.1Baseline Reservoir Characterization Results
  • 4.2Rheological Behavior of Polymer-Nano Fluid Slurries
  • 4.3Stability and Compatibility Assessments
  • 4.4Core Flood Results: Oil Recovery with Polymer Flood, Nano-Fluid, and Combined Systems
  • 4.5Wettability Alteration Observations
  • 4.6Pore-Scale and Core-Scale Transport Phenomena
  • 4.7Mechanistic Insights: Synergistic Effects, Displacement Efficiency, and Filtration/plugging Risks
  • 4.8Numerical Model Validation against Experimental Data
  • 4.9Economic Analysis: Cost-Benefit and Sensitivity
  • 4.10Environmental Impact Considerations and Sustainability

Chapter FIVE

SUMMARY, CONCLUSION AND RECOMMENDATIONS

  • 5.Conclusion and Summary
  • 5.1Summary of Key Findings
  • 5.2Contributions to Petroleum Engineering
  • 5.3Implications for Mature Reservoir Management
  • 5.4Recommendations for Field Implementation
  • 5.5Limitations and Assumptions Revisited
  • 5.6Suggestions for Future Research
  • 5.7Final Conclusions

Project Abstract

In this study, a novel EOR strategy integrating nano-fluid stabilized polymer flooding is investigated to enhance oil recovery in mature reservoirs with low permeability and high heterogeneity. The research combines experimental characterization, numerical simulation, and techno-economic assessment to quantify the performance of nano-fluid assisted polymer flooding (NFAPF) under realistic reservoir conditions. First, a comprehensive synthesis and surface modification of silica- and alumina-based nanoparticles were conducted to improve dispersion stability, thermal resistance, and interaction with polymer chains. Characterization included transmission electron microscopy, dynamic light scattering, zeta potential, contact angle, and viscoelastic properties of hybrid nanofluids in the presence of polyacrylamide and biopolymer blends. Mineralogical analysis of core plugs from representative mature reservoirs provided baseline porosity, permeability distributions, wettability, and capillary pressure curves to tailor NFAPF formulations. Rheological experiments established the synergistic effects of nano-additives on polymer viscosity, shear stability, and adsorption behavior on reservoir rocks. Coreflood experiments under reservoir-like temperatures and pressures evaluated linear and fractional flow patterns, oil displacement efficiency, and breakthrough timing for NFAPF compared with conventional polymer flooding and nanoparticle-only displacement methods. The results demonstrated improved sweep efficiency and delayed fingering due to enhanced mobility control and altered interfacial tension, while nanoparticles promoted favorable relative permeability behavior by stabilizing dispersed oil droplets and reducing emulsion breakage under high salinity. A coupled reservoir model incorporating non-Newtonian polymer rheology, nanoparticle transport, adsorption, and heterogeneous formation damage was developed to simulate bank-to-bank sweep performance in mature fields. History-matching against laboratory data validated the model, enabling sensitivity analyses on nanoparticle concentration, polymer molecular weight, salinity, temperature, and rock roughness. Optimization studies identified a critical window for nanoparticle loading and polymer concentration that maximizes incremental oil recovery while maintaining acceptable injectivity and minimal formation damage. The techno-economic assessment encompassed cost of materials, process energy, and required surface facilities, delivering a break-even oil price and net present value over field life under varying scenarios of water cut, injection schedules, and reservoir decline rates. Environmental implications, including nanoparticle fate, potential leakage pathways, and remediation strategies, were evaluated to ensure sustainable deployment. The study further discusses scale-up considerations, including surface facility compatibility, reservoir heterogeneity management, and monitoring via real-time tracers and downhole sensors. The overarching finding indicates that NFAPF can significantly extend the productive life of mature reservoirs by combining the high mobility control of polymers with nanoscale interfacial manipulation, resulting in higher oil recovery factors, reduced polymer degradation, and improved oil–water displacement dynamics in challenging reservoir conditions. Recommendations for pilot testing, field implementation guidelines, and future research directions are provided to facilitate practical adoption and optimization of this advanced EOR technique.

Project Overview

What This Project Is About

A straightforward look at how tiny fluid particles (nano-fluids) mixed with specialized polymers could help extract more oil from older, less productive wells. The project explores whether this combination can reduce oil’s cling to rock surfaces and push more oil toward the producing wells.



The Problem It Addresses

Mature reservoirs often leave a lot of oil behind after standard extraction. Current methods may be inefficient or expensive. The project seeks a safer, potentially cheaper way to boost recovery without excessive energy use or environmental impact.



Objectives of the Project


  1. Understand how nano-fluids and polymers work together to change the flow of oil in rocks.
  2. Evaluate the potential gains in oil recovery under realistic reservoir conditions.
  3. Identify key factors that influence performance, such as temperature, salinity, and rock type.
  4. Suggest practical guidelines for lab testing and preliminary field tests.


What You Will Do Step by Step


1) Review basic oil recovery concepts and explain nano-fluids and polymers in simple terms. 2) Design small experiments or simulations to test how the fluids move through rock-like materials. 3) Collect data on pressure, fluid movement, and recovery levels. 4) Analyze results to see if the approach could work better than existing methods. 5) Discuss limitations and what future work would be needed for field trials.



Expected Outcome


Expected to show whether nano-fluid assisted polymer flooding can practically increase oil recovery in mature reservoirs and provide a basic framework for scaling up to pilot tests, along with simple recommendations for safe implementation.

Blazingprojects Mobile App

πŸ“š Over 50,000 Project Materials
πŸ“± 100% Offline: No internet needed
πŸ“ Over 98 Departments
πŸ” Software coding and Machine construction
πŸŽ“ Postgraduate/Undergraduate Research works
πŸ“₯ Instant Whatsapp/Email Delivery

Blazingprojects App

Related Research

Petroleum engineerin. 4 min read

AI-assisted optimization of enhanced oil recovery using nanofluid flooding in carbon...

What This Project Is About A straightforward exploration of using tiny, specially designed liquids (nanofluids) to push more oil out of carbonate rock formation...

BP
Blazingprojects
Read more →
Petroleum engineerin. 2 min read

Optimization of Enhanced Oil Recovery using Nano-Fluid Assisted Polymer Flooding in ...

What This Project Is About A straightforward look at how tiny fluid particles (nano-fluids) mixed with specialized polymers could help extract more oil from old...

BP
Blazingprojects
Read more →
Petroleum engineerin. 2 min read

Optimization of Water Alternating Gas (WAG) Injection for Enhanced Oil Recovery in M...

What This Project Is About A plain-language overview of how injecting gas and water together can help extract more oil from difficult reservoirs, using computer...

BP
Blazingprojects
Read more →
Petroleum engineerin. 2 min read

Nano-enhanced Oil Recovery using Hybrid Surfactant-Polymer Flooding in Ultra-Low Per...

What This Project Is About A straightforward look at using tiny particles and tailored chemicals to push more oil out of very tight carbonate rocks. The project...

BP
Blazingprojects
Read more →
Petroleum engineerin. 4 min read

Optimization of Enhanced Oil Recovery using Hybrid CO2-Nanoparticle Foam Flooding in...

What This Project Is About This project looks at ways to recover more oil from old wells by combining two approaches: using CO2 gas to push oil and tiny particl...

BP
Blazingprojects
Read more →
Petroleum engineerin. 3 min read

Smart enhanced oil recovery optimization using machine learning-guided polymer flood...

What This Project Is About A readable overview of how we can improve oil recovery by combining smart computer ideas with polymer fluids in tricky, non-uniform r...

BP
Blazingprojects
Read more →
Petroleum engineerin. 4 min read

Integrated optimization of enhanced oil recovery using nanotechnology-assisted polym...

What This Project Is About A plain-language overview of how enhanced oil recovery can be improved by combining polymer flooding with tiny, engineered particles ...

BP
Blazingprojects
Read more →
Petroleum engineerin. 2 min read

Optimization of Enhanced Oil Recovery via Polymer Flooding in Low-Permeability Reser...

What This Project Is About A simple study of how polymer flooding can help extract more oil from tight rock formations where water alone doesn’t move oil well...

BP
Blazingprojects
Read more →
WhatsApp Click here to chat with us