Point-of-care microfluidic device for rapid, synchronous detection of malaria and dengue antigens in a single blood sample

 

Table Of Contents


Chapter ONE

INTRODUCTION

  • 1.1Introduction
  • 1.2Background of Study
  • 1.3Problem Statement
  • 1.4Objective of Study
  • 1.5Limitation of Study
  • 1.6Scope of Study
  • 1.7Significance of Study
  • 1.8Structure of the Research
  • 1.9Definition of Terms

Chapter TWO

LITERATURE REVIEW

  • 2.1Conceptual Framework and Theoretical Underpinnings
  • 2.2Overview of Malaria and Dengue Epidemiology
  • 2.3Point-of-Ccare Diagnostics: Principles and Technologies
  • 2.4Microfluidics in Biomedical Applications
  • 2.5Antigen Targets for Malaria and Dengue
  • 2.6Biosensor Transduction Mechanisms
  • 2.7Materials for Microfluidic Device Fabrication
  • 2.8Sample Preparation and Handling in Field Conditions
  • 2.9Signal Processing and Data Interpretation
  • 2.10Challenges and Gaps in Current Diagnostic Approaches

Chapter THREE

RESEARCH METHODOLOGY

  • 3.1Research Design and Rationale
  • 3.2Device Architecture and System Components
  • 3.3Materials and Fabrication Methods
  • 3.4Antigen Selection and Antibody Immobilization
  • 3.5Microfluidic Channel Design and Fluid Control
  • 3.6Detection modality (e.g., optical, electrochemical) and Signal Readout
  • 3.7Sample Preparation Protocols
  • 3.8Calibration, Sensitivity, and Specificity Studies
  • 3.9Validation with Clinical Samples
  • 3.10Data Collection Procedures
  • 3.11Statistical Analysis Plan

Chapter FOUR

DATA PRESENTATION AND ANALYSIS

  • 4.1Device Fabrication Results and Characterization
  • 4.2Analytical Performance: Limit of Detection and Dynamic Range
  • 4.3Specificity and Cross-Reactivity Assessments
  • 4.4Stability and Reproducibility Studies
  • 4.5Field-Testing Protocols and Feasibility in Low-Resource Settings
  • 4.6Comparison with Standard Diagnostic Methods
  • 4.7User Acceptability and Operational Workflow
  • 4.8Economic Viability and Cost Analysis

Chapter FIVE

SUMMARY, CONCLUSION AND RECOMMENDATIONS

  • 5.1Summary of Findings
  • 5.2Interpretation of Results in Context of Objectives
  • 5.3Implications for Public Health and Clinical Practice
  • 5.4Strengths and Limitations of the Study
  • 5.5Recommendations for Future Work
  • 5.6Conclusion and Final Summary

Project Abstract

Point-of-care microfluidic device for rapid, synchronous detection of malaria and dengue antigens in a single blood sample demonstrates a novel diagnostic platform that integrates sample handling, antigen capture, and signal readout within a compact, low-cost microfluidic chip suitable for deployment in low-resource settings. The device leverages a two-channel microfluidic architecture that concurrently processes a finger-prick volume and directs it through parallel immunoassay lanes tailored for Plasmodium falciparum/vivax histidine-rich protein II (HRP-II) and dengue virus nonstructural protein 1 (NS1) detection. A surface-functionalized polymeric substrate with spatially encoded capture antibodies provides high specificity, while nanoengineered magnetic beads enhance target pre-concentration to improve sensitivity. Real-time, multiplexed readouts are achieved via a dual-color electrochemical detection module and a complementary lateral-flow–based optical readout, enabling cross-validation of results within minutes. The microfluidic network integrates deterministic lateral displacement for debris removal, plasma separation from whole blood, and controlled reagent mixing, thereby minimizing user steps and reducing potential contamination. Optimization of assay chemistry includes the development of a universal blocking buffer that reduces nonspecific binding across both malaria and dengue assays, and a chemistries matrix to stabilize antigens during storage at ambient temperatures. The device employs a low-power electrochemical transducer array with on-chip calibration to deliver quantitative measurements of HRP-II and NS1 antigen concentrations, enabling semi-quantitative assessment of parasite burden and viremia. A robust signal-processing algorithm interprets multiplexed data streams, applying normalization against internal controls and compensating for hematocrit variation. Analytical performance demonstrates limit of detection in the low picogram per milliliter range for NS1 and sub-nanogram per milliliter range for HRP-II, with a dynamic range suitable for acute and low-titer infections. Cross-reactivity testing confirms high specificity against common febrile disease antigens, while matrix effects from whole blood are mitigated by integrated plasma separation and on-chip dilution schemes. Clinical validation using archived and prospective samples from malaria-endemic and dengue-endemic regions demonstrates concordance with gold-standard laboratory assays, with sensitivity and specificity meeting or exceeding current rapid diagnostic test performance benchmarks. Usability studies with end-users in community clinics indicate a straightforward workflow requiring minimal training, and the device’s decentralized nature reduces time to diagnosis, enabling earlier clinical decision-making and timely antimalarial and antiviral interventions. Economic analysis reveals a favorable cost-per-test profile driven by scalable manufacturing, disposable cartridge design, and negligible instrumentation requirements. Overall, this platform represents a significant advancement in point-of-care diagnostics by delivering rapid, accurate, and multiplexed detection of two concurrent febrile illnesses from a single small-volume blood sample, with potential for integration into surveillance networks and point-of-care treatment pathways.

Project Overview

What This Project Is About

A simple, portable device to test a small blood sample for two diseases—malaria and dengue—at the same time. It uses a tiny chip that controls the flow of liquid and shows results quickly, so testing can happen outside a full laboratory.



The Problem It Addresses

Malaria and dengue can look alike early on, and access to labs is limited in many areas. Waiting for separate tests delays treatment and can worsen outbreaks. A single device that can screen for both diseases saves time and resources.



Objectives of the Project


  1. Design a simple microfluidic chip that handles one drop of blood.
  2. Attach easy-to-read indicators for malaria and dengue antigens.
  3. Ensure results are fast, reliable, and safe for field use.
  4. Evaluate accuracy by comparing with standard lab tests.
  5. Assess usability for non-expert users in community settings.


What You Will Do Step by Step


  1. Review basic concepts of microfluidics and antigen testing.
  2. Acquire or simulate blood samples and relevant antibodies.
  3. Prototype the chip and integrate the detection readout.
  4. Run tests to optimize flow, reaction times, and readability.
  5. Collect data on sensitivity, specificity, and user feedback.
  6. Analyze results and compare to conventional tests.
  7. Prepare a report and a short user guide for field use.


Expected Outcome


A working, user-friendly dual-disease microfluidic test with clear readouts, validated accuracy, and a plan for field deployment. The project aims to contribute a low-cost, rapid screening option that can support timely diagnosis and treatment in resource-limited settings.

Blazingprojects Mobile App

📚 Over 50,000 Project Materials
📱 100% Offline: No internet needed
📝 Over 98 Departments
🔍 Software coding and Machine construction
🎓 Postgraduate/Undergraduate Research works
📥 Instant Whatsapp/Email Delivery

Blazingprojects App

Related Research

Medical Laboratory S. 4 min read

Validation of a cost-effective point-of-care hematology analyzer for rural clinical ...

What This Project Is About A straightforward study of a affordable, portable hematology tool that can be used in clinics far from big labs. It checks how well t...

BP
Blazingprojects
Read more →
Medical Laboratory S. 2 min read

Development of a point-of-care diagnostic algorithm integrating hematology and bioch...

What This Project Is About A straightforward study that explores creating a quick, on-site test approach to detect sepsis early by using simple blood tests from...

BP
Blazingprojects
Read more →
Medical Laboratory S. 3 min read

Development and Validation of a Point-of-Ccare Biosensor for Rapid Detection of SARS...

What This Project Is About A straightforward, hands-on investigation into creating a portable device that can quickly detect a SARS-CoV-2 antigen in saliva. The...

BP
Blazingprojects
Read more →
Medical Laboratory S. 3 min read

Development of a point-of-care methylation biomarker panel for early detection of he...

What This Project Is About A straightforward overview of studying a quick, easy test that looks at DNA methylation patterns in blood to detect liver cancer earl...

BP
Blazingprojects
Read more →
Medical Laboratory S. 2 min read

Development of a point-of-care rapid multiplex assay for simultaneous detection of c...

What This Project Is About A straightforward study of a quick, home-friendly test that can check for several common respiratory germs at once, using a CRISPR-ba...

BP
Blazingprojects
Read more →
Medical Laboratory S. 4 min read

Digital PCR-based detection and quantification of circulating tumor DNA as a biomark...

What This Project Is About A straightforward look at using a precise DNA measurement method to detect tiny fragments shed by cancer cells into the blood. The pr...

BP
Blazingprojects
Read more →
Medical Laboratory S. 2 min read

Development and validation of a multiplex molecular assay for rapid detection of opp...

What This Project Is About A plain-language overview of the topic and what the project investigates. The Problem It Addresses What problem or gap this project ...

BP
Blazingprojects
Read more →
Medical Laboratory S. 2 min read

Point-of-care microfluidic device for rapid, synchronous detection of malaria and de...

What This Project Is About A simple, portable device to test a small blood sample for two diseases—malaria and dengue—at the same time. It uses a tiny chip ...

BP
Blazingprojects
Read more →
Medical Laboratory S. 2 min read

Development and validation of a multiplex real-time PCR assay for simultaneous detec...

What This Project Is About A plain-language overview of the topic and what the project investigates. The Problem It Addresses What problem or gap this project ...

BP
Blazingprojects
Read more →
WhatsApp Click here to chat with us