Development of baobab/sisal reinforced low density polyethylene hybrid composite

 

Table Of Contents


  • No response received.

Project Abstract

<p> </p><p>In this work, the properties of baobab/sisal fibre reinforced low density polyethylene hybrid composites were studied. The effect of fibre loading and fibre treatment with varying sodium hydroxide (NaOH)concentration on the composite properties was investigated. The developed composites were characterized for tensile strength, modulus of elasticity (MOE), elongation at break, hardness and impact strength.Analysis of the results showed that, for the monolithic composite,10 wt% baobab fibre loading had the bestmechanical property compared to other baobab fibre loadings, with tensile strength and MOEof 8.28 MPa and 127 MParespectively.The result ofNaOH treatment showed that 8 wt% treated fibre composite exhibited the best tensile strength, MOE, impact strength and the least percentage water absorption of 14.54 MPa, 245 MPa, 4.4 J/mm2 and 1.8% respectively.On hybridization with sisal, it was observed that the100% sisal fibre composite exhibited higher tensile strength and MOEof 12.47 MPa, 262.85 MPa, and the least percentage water absorption capacity of 0.37% but for both the hybrid were higher than the monolithic composite. The result of the NaOH treated hybrid composite showed that 6 wt% NaOH treated sisal/baobab fibre exhibited the best tensile strength, MOE and percentage water absorption of 17.08 MPa, 279.40 MPa, and 0.18% respectively which were higher than that of the monolithic sisal fibre reinforced composites. The fourier transforms infrared spectroscopy (FT-IR) analysis of untreated and treated baobab fibre showed that there was reduction in the hemicelluloses in the NaOH treated baobab fibres as indicated by the band at2277–2274 cm-1representing C=O stretching of hemicelluloses. The scanning electron microscope (SEM) analysis showed that composite produced from untreated fibre had more cracks and voids, possibly due topoor interaction between the fibre and low density polyethylene matrix, resulting in lower mechanical properties.The composite have properties whichsuggest their suitability for application in deck boards, dash board, rear seat barriers and guardrails systemsto replace the hardwood and metals currently used hence, preserving the environment.</p><p>&nbsp;</p> <br><p></p>

Project Overview

<p> </p><p><strong>INTRODUCTION</strong></p><p><strong>1.1 Background of Study</strong></p><p>Composites are multifunctional material systems that provide characteristics not obtainable from any discrete materials. They are cohesive structures made by physically combining two or more compatible materials, different in composition and characteristics and sometimes in form (Prankash <em>et al</em>., 2009). These materials consist of the matrix and reinforcement (Mohini<em>et al.,</em>&nbsp;2011). The constituents can be wholly natural or synthetic and sometimes the combination of the two.</p><p>Synthetic-based fibre composites are commercially appealing because they can be used to develop products with known properties to meet a variety of diverse applications. However, these materials represent an environmental liability both in production and upon disposal. In the past years, growing environmental pollution has called for the use of natural materials for different applications. This has been influenced by the ever increasing demand for newer, stiffer, recyclable, fire repellant, less expensive and yet lighter-weight materials in fields such as aerospace, transportation, construction and packaging industries (Duigou <em>et al</em>., 2008). Meanwhile, natural fibres reinforced polymer composites represent an opportunity to partially minimize on the environmental impacts by integrating biodegradable fibres such as flax, hemp, sisal, and wood particles in place of synthetic fibres such as glass, carbon or steel in composite materials production (Alabi, 2011).</p> <br><p></p>

Blazingprojects Mobile App

πŸ“š Over 50,000 Project Materials
πŸ“± 100% Offline: No internet needed
πŸ“ Over 98 Departments
πŸ” Software coding and Machine construction
πŸŽ“ Postgraduate/Undergraduate Research works
πŸ“₯ Instant Whatsapp/Email Delivery

Blazingprojects App

Related Research

Pure and Industrial . 3 min read

Synthesis and Characterization of Biopolymer-Based Catalysts for Green Organic Trans...

What This Project Is About A simple, hands-on project exploring catalysts made from a natural biopolymer (chitosan from algae) attached to a porous mineral (zeo...

BP
Blazingprojects
Read more →
Pure and Industrial . 4 min read

Synthesis, Characterization, and Catalytic Performance of Metal-Organic Frameworks D...

What This Project Is About The project looks at tiny, highly organized structures called metal-organic frameworks (MOFs). These are built from metal parts linke...

BP
Blazingprojects
Read more →
Pure and Industrial . 3 min read

Synthesis and Characterization of Bio-Based Polyester Plastics from Lignocellulosic ...

What This Project Is About A straightforward study of creating plastics from plant-based materials and testing how they perform like conventional plastics. It l...

BP
Blazingprojects
Read more →
Pure and Industrial . 2 min read

Synthesis and characterization of bio-based polylactic acid from agricultural waste ...

What This Project Is About This project explores making a sustainable plastic called polylactic acid (PLA) from waste plant material. It combines a fermentation...

BP
Blazingprojects
Read more →
Pure and Industrial . 2 min read

Synthesis, Characterization, and Catalytic Performance of Bio-derived Hierarchical Z...

What This Project Is About This project explores creating new catalyst materials by combining natural, bio-derived substances with silica to make hierarchical z...

BP
Blazingprojects
Read more →
Pure and Industrial . 3 min read

Synthesis and characterization of green corrosion inhibitors from plant extracts for...

What This Project Is About This project looks at natural substances from plants to protect metal (mild steel) from rusting in acidic cleaners. It compares how w...

BP
Blazingprojects
Read more →
Pure and Industrial . 4 min read

Synthesis and characterization of bio-based polyols from lignocellulosic biomass for...

What This Project Is About This project looks at making and studying bio-based polyols from plant-based materials to replace some fossil-based ingredients in po...

BP
Blazingprojects
Read more →
Pure and Industrial . 2 min read

Synthesis, Characterization, and Catalytic Performance of Heterogeneous Metal–Orga...

What This Project Is About The project looks at making and testing new carbon-based catalysts derived from metal–organic frameworks (materials built from meta...

BP
Blazingprojects
Read more →
Pure and Industrial . 3 min read

Synthesis and Characterization of Bio-based Surfactants from Agricultural Waste for ...

What This Project Is About This project explores creating surfactant molecules from agricultural waste and testing how they help reactions that occur in water-f...

BP
Blazingprojects
Read more →
WhatsApp Click here to chat with us