Suitability assessment of kurumu, garin-maiganga, gindiakwati and ogboyoba coal deposit properties for power generation

 

Table Of Contents


  • <p> </p><p>Title page……………………………………………………………………….. i<br>Declaration……………………………………………………………….…….. ii<br>Certification…………………………………………………………………….. iii<br>Acknowledgement……………………………………………………………… iv<br>Abstract………………………………………………………………………… v<br>Table of contents……………………………………………………………….. vi<br>List of figures…………………………………………………………………… ix<br>List of tables……………………………………………………………………. x<br>List of appendices……………………………………………………………… xi<br>Abbreviations………………………………………………………………….. xii<br>

Chapter ONE

INTRODUCTION

  • ……………………………………….. 1<br>
  • 1.1Background of the study…………………………………………………. 1<br>
  • 1.2Benefits of coal as a source of power generation to the nation…………. 4<br>
  • 1.3Statement of research problem…………………………………………… 5<br>
  • 1.4Aim and Objectives………………………………………………………… 5<br>
  • 1.5Significance of the Research……………………………………………… 6<br>
  • 1.6Scope of Research…………………………………………………………. 6<br>`<br>

Chapter TWO

LITERATURE REVIEW

  • ……………………………… 7<br>
  • 2.1Availability of coal in Nigeria……………………………………………. 7<br>
  • 2.2Previous researches on coal……………………….………………………. 9<br>
  • 2.3Classification of coal……………….………………………….………….. 11<br>
  • 2.4Clean Coal Technology………………………………………………….. 12<br>2.
  • 4.1Circulating Fluidized Bed Combustion (CFBC)………………………… 12<br>2.
  • 4.2Pressurized Fluidized Bed Combustion (PFBC)………………………… 13<br>2.
  • 4.3Integrated Gasification Combined Cycle (IGCC)………………………. 14<br>2.
  • 4.4Top Cycles……………………………………………………………….. 16<br>
  • 2.5Terms and Significance of Various Parameters in Proximate Analysis..18<br>2.
  • 5.1Fixed carbon……………………………………………………………… 18<br>2.
  • 5.2Volatile Matter…………………………………………………………… 18<br>2.
  • 5.3Ash Content……………………………………………………………… 18<br>2.
  • 5.4Moisture Content………………………………………………………… 18<br>
  • 2.6Ultimate Analysis………………………………………………………. 19<br>
  • 2.7Calorific Value…..….………………………………………………….. 19<br>viii<br>
  • 2.8Thermogravimetric analysis…………………………………………… 20<br>
  • 2.9Fusibility of coal ash…………………………………………………… 21<br>
  • 2.10Ash Composition Analysis………………………….………………… 22<br>
  • 2.11Auto-Ignition temperature and coal storage……………………….. 22<br>
  • 2.12Coal quality requirements for coal-fired plant…………………….. 23<br>
  • 2.13Power generation from low grade coals…………………………….. 25<br>
  • 2.14Research Gap…………………………………………………………. 26<br>

Chapter THREE

SYSTEM DESIGN AND IMPLEMENTATION

  • MATERIALS AND METHODS………………… 27<br>
  • 3.1Coal Samples……………………………………………………………27<br>
  • 3.2General Sample Preparations…………………………………………. 27<br>
  • 3.3Proximate Analysis…………………………………………………….. 27<br>
  • 3.4Ultimate Analysis………………………………………………………. 29<br>
  • 3.5Determination of Total Sulphur Content…………………….……… 30<br>
  • 3.6Determination of Calorific Value………………………………….…. 30<br>
  • 3.7Thermogravimetric and Differential Scanning Calorimetry………. 31<br>
  • 3.8Determination of Ash Fusion Temperature of Coal Samples….…… 31<br>
  • 3.9Ash composition analysis………………………………………………. 32<br>
  • 3.10Experimental procedure for the determination of<br>auto-ignition temperature……………………………………………………32<br>9<br>

Chapter FOUR

SYSTEM TESTING AND EVALUATION

  • RESULTS AND DISCUSSION..……………………. 33<br>
  • 4.1Introduction……………………………………………………………… 33<br>
  • 4.2Proximate Analysis………………………………………………………. 33<br>
  • 4.3Ultimate Analysis…………………………………..…………………….. 34<br>
  • 4.4Calorific Value………………………………………………………….… 35<br>4.5Thermogravimetric and Differential Scanning Calorimetry analyses… 35<br>4.
  • 5.1TG-DSC of Kurumu coal deposit………………………………………. 35<br>4.
  • 5.2TG-DSC of Garinmaiganga coal deposit…………………………….… 36<br>4.
  • 5.3TG-DSC of Gindiakwaticoal deposit………………………….……….. 36<br>4.
  • 5.4TG-DSC of Ogboyoba coal deposit………………………….…………. 37<br>
  • 4.6Ash Analysis….…………….……………………………….……………… 37<br>4.7Ash Fusion Temperature…………………………………….…………… 38<br>
  • 4.8Coal Auto-Ignition Temperature……………………………………….. 38<br>
  • 4.9Discussion of result……………………………………………………….. 39<br>4.
  • 9.1Proximate analysis…………………………………………….………… 39<br>4.
  • 9.2Ultimate analysis…………………………………………….………….. 40<br>4.
  • 9.3Calorific value…………………………………………….……………… 41<br>4.
  • 9.4Thermogravimetric and Differential Scanning Calorimetry analyses….. 42<br>4.
  • 9.5Coal ash analysis………………………………………….…………….. 43<br>4.
  • 9.6Ash fusion temperature…………………………………….…………… 44<br>4.
  • 9.7Coal auto-ignition temperature………………………….……………… 44<br>4.
  • 9.8Ranking of analysed coal samples……………………….…………….. 45<br>4.
  • 9.9Ash and sulphur classification of the analysed coal samples…….……. 46<br>4.
  • 9.10Suitability of analysed coal samples for power generation…….……. 46<br>

Chapter FIVE

SUMMARY, CONCLUSION AND RECOMMENDATIONS

  • CONCLUSION AND<br>RECOMMENDATIONS……………….…………………………………… 51<br>
  • 5.1Summary…………………………………………………………………. 51<br>
  • 5.2Conclusion………………………………………………………………… 52<br>
  • 5.3Recommendations………………………………………………………… 53<br>REFERENCES……………………………………………………………….. 54<br>APPENDICES………………………………………………………………… 57</p><p>&nbsp;</p><p>&nbsp;</p> <br><p></p>

Project Abstract

<p> </p><p>In the quest for search of suitable coal deposits for power generation, the qualities of<br>four Nigerian coal samples from Kurumu (Gombe State), Garin-maiganga (Bauchi<br>State), Gindi-akwati (Plateau State) and Ogboyoba (Kogi State) deposits were analysed<br>to assess their suitability for power generation. The coal samples were subjected to<br>proximate analysis, ultimate analysis, calorific value determination, thermogravimetric<br>analysis, ash fusion temperature analysis, ash composition analysis and auto-ignition<br>temperature determination. Tests were carried out in Nigerian Geological Survey<br>Agency, Kaduna and Beijing University of Technology (BUT), China. From the results<br>of these analyses, Kurumu coal deposit was found to be a sub-bituminous, low ash and<br>low sulphur coal. Garin-maiganga coal deposit was found to be a sub-bituminous,<br>medium ash and low sulphur coal. Gindi-akwati coal deposit was found to be a lignitic,<br>high ash and low sulphur coal while Ogboyoba coal deposit was found to be a subbituminous,<br>low ash and low sulphur coal. Kurumu, Garin-maiganga and Ogboyoba coal<br>deposits with calorific values of 25.71MJ/kg, 23.37MJ/kg and 24.78MJ/kg respectively,<br>can be used for power generation using the integrated gasifier combustion cycle clean<br>coal technology. However, Gindi-akwati coal deposit with a calorific value of<br>11.56MJ/kg can be used for power generation using circulating fluidised bed combustion<br>technology due to its tolerance of a wide variety of coals. The self-ignition temperature<br>and ease of combustion of the coal samples in decreasing order of their volatile ratio is<br>Gindi-akwati (0.58), Garin-maiganga (0.49), Ogboyoba (0.48) and Kurumu (0.47).</p><p>&nbsp;</p><p>&nbsp;</p> <br><p></p>

Project Overview

<p> </p><p>INTRODUCTION<br>1.1 Background of the study<br>Adequate power supply is an unavoidable prerequisite to any nation’s<br>development. Electricity plays a very important role in the socio-economic and<br>technological development of every nation. The electricity demand in Nigeria far<br>outstrips the supply and the little supply is epileptic in nature. The country is<br>faced with acute electricity problems which is hindering its development<br>notwithstanding availability of vast energy resources in the country. It is widely<br>accepted that there is a strong correlation between socioeconomic development<br>and the availability of electricity in a given country. The energy woes today had<br>14<br>continued unabated over the years since 60 percent of Nigeria’s electricity –<br>generating capacity broke down due to decades of neglect by the government.<br>The remainder serves only 40% of her citizens<br>(Essien et al., 2013; Sambo et al., 2010) at different degrees of black-outs,<br>rolling black-outs and brown-outs. Another side to these woes is the fact that for<br>more than three decades, Nigeria went for gas – fired power stations, in the days<br>when there was still abundant cheap gas. With the present skyrocket price of gas,<br>it has become expensive to run those plants when compared to coal – fired and<br>nuclear plants ( Oodo and Zou, 2009).<br>In Nigeria presently, 93% of electric power generation is provided by gas, the<br>remainder is from hydro sources. There are over 8.6GW of installed capacity of<br>generating plant made of government owned and independent power plant across<br>Nigeria. Despite the large number of installed power generation capacity, Nigeria<br>could still not meet the electricity demand of its populace which is estimated at<br>10GW because of old age of the power plants and lack of new generation plants<br>addition. Actual electricity generation is only between 2.5 – 3.6GW (Ujam and<br>Diyoke, 2013).<br>Even if new power plants addition were to be made, the overdependence of<br>Nigeria’s electrical system on gas which cannot guarantee longer term<br>sustainability should be a major concern. The frequent agitation for resource<br>control from areas with fossil fuel reserves and incessant vandalization of power<br>plant gas supply infrastructure are threats to the continuous sustainability of the<br>Nigeria’s power system of today.<br>Moreover, there is an urgent need for a good energy mix in the nation’s energy<br>generation infrastructure due to the combined benefits derivable from it.<br>Globally, the energy industry is driving towards sustainable low carbon emitting,<br>renewable energy sources.<br>However, renewable as at now are still in their infant stage of commercialization<br>and cannot help to meet Nigeria’s base load electricity demand deficit. It is also<br>15<br>worthy of mention that even in the most envisioned grid of the 21st century<br>otherwise called the smart grid, traditional large central power plants still form<br>the ‘nucleus’ of this concept both in Europe and America<br>( Essien et al., 2013).<br>Coal is an important energy resource across the world, principally for electricity<br>generation. It is the world’s most abundant and widely distributed fossil fuel,<br>with global proven reserves totaling nearly 1 trillion tonnes (Ujam and Diyoke,<br>2013).<br>Coal which is spread across Nigerian states with an estimated reserve of 2.734<br>billion tones<br>(Sambo et al., 2010; Ujam and Diyoke, 2013) holds the key to Nigeria’s<br>present and even future energy security. On the average, 40% of the world’s<br>electricity is generated from coal with a rather higher percentage as you move<br>from one country to another. For instance, electricity generation in South Africa<br>derivable from coal fuels is placed at about 93%, it is 92% in Poland, 79% in<br>china, 69% in India, 49% in the USA (Olayande et al., 2012) etc as shown in<br>Table 1.1, but most unfortunately it is 0% in Nigeria. Most developed and<br>developing countries that has coal deposits meet their energy demands through<br>coal based generation. Nigeria can bridge its energy demand and supply deficit<br>by leveraging on its abundant coal deposit resources.<br>Nigeria cannot continue to be in the dark when there is approximately 3 billion<br>tonnes of coal deposits spread across 22 locations in Nigeria (Kibiya, 2012) that<br>has not been harnessed. The growing energy needs of the developing world are<br>likely to ensure that coal remains a key component of the power generation mix<br>in the foreseeable future, regardless of the climate change policy.<br>Table 1.1 Top 12 Countries that use Coal for Electricity Generation<br>S/No. Country Percentages (%)<br>1 South Africa 93<br>2 Poland 92<br>3 China 79<br>4 Australia 77<br>16<br>5 Kazakhstan 70<br>6 India 69<br>7 Israel 63<br>8 Czech republic 60<br>9 Morocco 55<br>10 Greece 52<br>11 USA 49<br>12 Germany 46<br>Source: Olayande et al., 2012<br>Developing economies have a particularly strong dependency on coal for power<br>production, and the rate of growth in coal’s contribution to electricity supply in<br>these countries will be greatest, as shown in Table 1.2:<br>Source<br>Year 2004 2015 2030<br>Total<br>Generation<br>TWh % share TWh % share TWh % share<br>5, 754 100 10, 749 100 17, 001 100<br>Coal 2753 47.8 5659 52.6 8979 52.8<br>Oil 580 10.1 670 6.2 616 3.6<br>Gas 983 17.1 1955 18.2 3389 19.9<br>Nuclear 142 2.5 322 3.0 523 3.1<br>Hydro 1239 21.5 1928 17.9 2827 16.6<br>Renewables 56 1.0 215 2.0 668 3.9<br>17<br>Table 1.2: Developing Countries Electricity Generation from Major Fuels, IEA<br>Reference Scenario<br>Source: International Energy Agency, 2007<br>1.2 Benefits of coal as a source of power generation to the nation<br>The exploitation of coal for electricity generation and the production of coal<br>briquettes for domestic and industrial heating will bring a number of benefits<br>including;<br>i) Increased and more reliable electricity supply<br>ii) Lower cost electrical energy<br>iii) Expanded industrialization of the economy<br>iv) Increased employment and human resource development<br>v) Increased capacity utilization of existing industries<br>vi) Increased national income through taxes and<br>vii) Reduced deforestation and prevention of desert encroachment in the<br>northern parts of the Country<br>Despite these benefits, the use of coal for electricity generation also have some<br>short comings most of which are centered on environmental pollution. However<br>the development of clean coal technology has considerably reduced these green<br>house emission effects.<br>1.3 Statement of research problem<br>Since the discovery of petroleum in Nigeria, the use of coal for electricity<br>generation, cooking, heating up houses in the cold period to create warmth, e.t.c,<br>has been neglected in spite of its abundance in the country. This results to<br>constant failure in power supplies, political and economical instability due to<br>insufficiency and increase in price of petroleum product. Therefore, against the<br>backdrop of abundant proven reserves of coal, analyses of coal properties for<br>their suitability in power generation can significantly contribute to Nigeria’s<br>energy mix. The generation of electricity in Nigeria has suffered a major setback<br>(excluding hydro)<br>18<br>due to unavailability of data on Nigerian coal for investors. To readily attract<br>prospective investors, it is pertinent to readily make available the properties of<br>Nigerian coals that are critical for electricity generation.<br>1.4 Aim and Objectives<br>The aim of this research is to determine the properties of coal from four deposits<br>in Nigeria which include Kurumu (Gombe State), Garin-maiganga (Bauchi<br>State), Gindi-akwati (Plateau State) and Ogboyoba (Kogi State) thereby<br>enriching the repository of existing data on properties of Nigerian coals in power<br>generation.<br>The specific objectives of the research are:<br>i) To carry out proximate and ultimate analyses of the coal samples<br>ii) To determine the calorific values of the coal samples<br>iii) To carry out thermogravimetric analysis of the coal samples<br>iv) To determine the ash fusion temperature, auto-ignition temperatures of<br>coal samples and carry out ash analysis of the coal samples<br>v) To characterize the coal samples and To compare the results with existing<br>standards and make recommendations on the use of the coal from each<br>deposit for power generation<br>1.5 Significance of the Research<br>With the world’s industrial giants such as the United States of America, China,<br>Germany etc, heavily depending on coal for electricity generation, Nigeria<br>cannot exclude herself from benefitting from this resource which she has in<br>abundance. This research therefore has helped to determine the suitability of<br>some of the Nigerian coals for use in coal-fired power plants not only in Nigeria,<br>but as an export product to other coal-consuming countries around the world.<br>This will assist potential investors in Nigerian power sector to make a decision<br>on the profitability of using each deposit as a source for power generation.<br>19<br>1.6 Scope of research<br>This research covers analyses of coal samples from four deposits in Nigeria<br>which include Kurumu (Gombe State), Garin-maiganga (Bauchi State), Gindiakwati<br>(Plateau State) and Ogboyoba (Kogi State). Analyses carried out were<br>proximate analysis, ultimate analysis, determination of calorific value,<br>thermogravimetric analysis, ash composition analysis, ash fusion temperature<br>and auto-ignition temperature to assess their suitability for electric power<br>generation. From the analyses carried out, the coal samples were characterized<br>and the appropriate clean coal technology was recommended.</p><p>&nbsp;</p> <br><p></p>

Blazingprojects Mobile App

📚 Over 50,000 Project Materials
📱 100% Offline: No internet needed
📝 Over 98 Departments
🔍 Software coding and Machine construction
🎓 Postgraduate/Undergraduate Research works
📥 Instant Whatsapp/Email Delivery

Blazingprojects App

Related Research

Mechanical engineeri. 2 min read

Design and optimization of a passive vibration isolation system for high-precision C...

What This Project Is About A straightforward look at how to reduce unwanted vibrations in precision CNC machines using specially designed mounts made from metam...

BP
Blazingprojects
Read more →
Mechanical engineeri. 3 min read

Smart adaptive HVAC ducting system using shape memory alloy actuators for energy opt...

What This Project Is About The project looks at how to automatically adjust how air moves through a building’s ventilation ducts to save energy. It uses shape...

BP
Blazingprojects
Read more →
Mechanical engineeri. 2 min read

Design and optimization of a coupled electro-hydraulic actuation system for autonomo...

What This Project Is About A straightforward study of how to use a combination of electric motors and hydraulic components to control robotic grippers. The proj...

BP
Blazingprojects
Read more →
Mechanical engineeri. 4 min read

Design and optimization of a passive cooling system for high-power electric motors u...

What This Project Is About A plain-language overview of how a quiet, efficient cooling system can protect high-power electric motors by using layers of special ...

BP
Blazingprojects
Read more →
Mechanical engineeri. 4 min read

- Design and feasibility study of a solar-assisted heat pump for domestic water heat...

What This Project Is About This project looks at several innovative energy and engineering ideas, each aiming to combine practicality with efficiency. It covers...

BP
Blazingprojects
Read more →
Mechanical engineeri. 3 min read

Development of an autonomous, energy-efficient solar-assisted cooling system for agr...

What This Project Is About A straightforward exploration of a cooling system for greenhouses that uses solar power and special materials to keep temperatures st...

BP
Blazingprojects
Read more →
Mechanical engineeri. 2 min read

Design and optimization of a modular autonomous micro-robotic gripper for delicate o...

What This Project Is About A straightforward, hands-on project about designing a small, modular gripper that can be controlled by a computer to pick up and rele...

BP
Blazingprojects
Read more →
Mechanical engineeri. 4 min read

Development of a lightweight, high-strength composite lattice structure for automoti...

What This Project Is About A straightforward, hands-on look at using lightweight, strong lattice structures made from composites to improve car crash energy abs...

BP
Blazingprojects
Read more →
Mechanical engineeri. 4 min read

Design and optimization of a passive cooling system for electric vehicle battery pac...

What This Project Is About A plain-language overview of the topic and what the project investigates. The Problem It Addresses What problem or gap this project ...

BP
Blazingprojects
Read more →
WhatsApp Click here to chat with us