Design and construction of an improved multipurpose irrigator

 

Table Of Contents


Chapter ONE

INTRODUCTION

  • 1.1Introduction
  • 1.2Background of Study
  • 1.3Problem Statement
  • 1.4Objective of Study
  • 1.5Limitation of Study
  • 1.6Scope of Study
  • 1.7Significance of Study
  • 1.8Structure of the Research
  • 1.9Definition of Terms

Chapter TWO

LITERATURE REVIEW

  • 2.1Overview of Irrigation Systems
  • 2.2Historical Development of Irrigation
  • 2.3Types of Irrigation Systems
  • 2.4Benefits of Irrigation
  • 2.5Challenges in Irrigation
  • 2.6Sustainable Practices in Irrigation
  • 2.7Technological Advances in Irrigation
  • 2.8Economic Impact of Irrigation
  • 2.9Environmental Considerations in Irrigation
  • 2.10Future Trends in Irrigation

Chapter THREE

SYSTEM DESIGN AND IMPLEMENTATION

  • 3.1Research Design
  • 3.2Data Collection Methods
  • 3.3Sampling Techniques
  • 3.4Data Analysis Procedures
  • 3.5Research Ethics
  • 3.6Instrumentation
  • 3.7Validity and Reliability
  • 3.8Limitations of Methodology

Chapter FOUR

SYSTEM TESTING AND EVALUATION

  • 4.1Overview of Findings
  • 4.2Analysis of Data
  • 4.3Comparison of Results
  • 4.4Interpretation of Results
  • 4.5Discussion on Key Findings
  • 4.6Implications of Results
  • 4.7Recommendations for Future Research
  • 4.8Practical Applications of Findings

Chapter FIVE

SUMMARY, CONCLUSION AND RECOMMENDATIONS

  • 5.1Summary of Findings
  • 5.2Conclusions
  • 5.3Contributions to the Field
  • 5.4Implications for Practice
  • 5.5Recommendations for Action

Project Abstract

<p> </p><p><em>The drip irrigator is an important device which helps to provide more yield for same plant and also enables continuous and maximum crop production throughout the year be it winter or summer by supplying the right amount of water needed by plants for optimum performance. The drip irrigator can also be adapted for other applications such as pest control, weed control etc. This device is more convenient to operate and maintain since the function of the lever bar is replaced by a battery powered pump. The device was able to discharge 1 liter in 2 seconds and thus discharging the whole volume of the reservoir (16 liters) in 32 seconds. The pressure inside the reservoir is 4139.82N/M2.</em></p><p><em>&nbsp; The work also looked at various problems encountered during the construction process and proposes solutions and recommendation to surmount the difficulties.</em></p><p><strong>&nbsp;</strong></p> <br><p></p>

Project Overview

<p> </p><p><strong>INTRODUCTION</strong></p><p>Irrigation is the controlled application of water for agricultural purposes through manmade systems to supply water requirements not satisfied by rainfall. Crop irrigation is vital throughout the whole world in other to provide the world’s ever growing populations with enough food. The role of irrigation is to supply each plant with just the right amount of water it needs. Many different irrigation methods are used worldwide, including; centre pivot, drip, flood, furrow, gravity, rotation, sprinkler, sub irrigation, travelling gun etc.</p><p>The improved multipurpose drip irrigator is designed to improve fluid discharge efficiency and contribute substantially to improve crop productivity. The drip irrigation is a type of pressurized irrigation that involves applying liquid directly to the plant’s root using mechanical and hydraulic devices, thereby reducing the amount of water loss due to evaporation effect. This device is highly used in irrigation which replenishes the nutrients consumed by the crops or provides water required for softening the soil to make it workable for agricultural activities. The goal of irrigation is to supply each plant with just the right amount of water and nutrients needed.</p><p>&nbsp;</p><p>Various designs of irrigation devices for micro irrigation scheme have inadequate design consideration with designers not really taking into account the kind of materials used in fabrication, as well as the headaches faced by the operators of this piece of equipment in moving the rocker bar up and down continuously to create a pressure difference throughout the period of irrigation. Designers also more often don’t adapt the equipment for other purposes like weed control pest control etc. Finally one major problem associated with most of the irrigation devices is the inefficiency of water getting to the plant root due to evaporation on the soil surface, thus the need for a modification in this project.</p><p>The ultra aim is to increase crop yield as a contribution to agricultural development. Also specific objectives are outlined below</p><ol><li>To construct a device that makes localized surface irrigation easier. Installation and maintenance costs are reduced compared to an underground irrigation system.</li><li>To construct a device that will improve agricultural productivity by ensuring more yields for same plant and reduced time for products to grow to maturity.</li><li>To reduce the stress of moving the rocker bar up and down continuously in order to create a pressure difference between the inside of the cylinder and the outside which will otherwise cause tiredness to the individual.</li><li>To improve efficiency and life span of the equipment by proper selection of materials.</li><li>To increase discharge efficiency and proper absorption of water by plant roots.</li><li>To provide a means of water intercession for crops during drought period</li></ol><p>The study involves an x-ray of various devices used for micro irrigation. It also covers conceptual and detailed design of the question. It covers the detailed drawing, construction, costing and testing of the device.</p><ul><li><strong>SIGNIFICANCE OF THE STUDY</strong></li></ul><p>The significance of this project work includes:</p><ol><li>It will add to on-going research on micro irrigation</li><li>It will serve as a reference tool to other researchers who are interested in this subject matter</li></ol><p>It will x-ray the areas that need to be improved</p> <br><p></p>

Blazingprojects Mobile App

πŸ“š Over 50,000 Project Materials
πŸ“± 100% Offline: No internet needed
πŸ“ Over 98 Departments
πŸ” Software coding and Machine construction
πŸŽ“ Postgraduate/Undergraduate Research works
πŸ“₯ Instant Whatsapp/Email Delivery

Blazingprojects App

Related Research

Mechanical engineeri. 4 min read

Design and optimization of a passive vibration isolation system for high-precision C...

What This Project Is About A straightforward look at how to reduce unwanted vibrations in precision CNC machines using specially designed mounts made from metam...

BP
Blazingprojects
Read more →
Mechanical engineeri. 4 min read

Smart adaptive HVAC ducting system using shape memory alloy actuators for energy opt...

What This Project Is About The project looks at how to automatically adjust how air moves through a building’s ventilation ducts to save energy. It uses shape...

BP
Blazingprojects
Read more →
Mechanical engineeri. 4 min read

Design and optimization of a coupled electro-hydraulic actuation system for autonomo...

What This Project Is About A straightforward study of how to use a combination of electric motors and hydraulic components to control robotic grippers. The proj...

BP
Blazingprojects
Read more →
Mechanical engineeri. 4 min read

Design and optimization of a passive cooling system for high-power electric motors u...

What This Project Is About A plain-language overview of how a quiet, efficient cooling system can protect high-power electric motors by using layers of special ...

BP
Blazingprojects
Read more →
Mechanical engineeri. 2 min read

- Design and feasibility study of a solar-assisted heat pump for domestic water heat...

What This Project Is About This project looks at several innovative energy and engineering ideas, each aiming to combine practicality with efficiency. It covers...

BP
Blazingprojects
Read more →
Mechanical engineeri. 2 min read

Development of an autonomous, energy-efficient solar-assisted cooling system for agr...

What This Project Is About A straightforward exploration of a cooling system for greenhouses that uses solar power and special materials to keep temperatures st...

BP
Blazingprojects
Read more →
Mechanical engineeri. 2 min read

Design and optimization of a modular autonomous micro-robotic gripper for delicate o...

What This Project Is About A straightforward, hands-on project about designing a small, modular gripper that can be controlled by a computer to pick up and rele...

BP
Blazingprojects
Read more →
Mechanical engineeri. 4 min read

Development of a lightweight, high-strength composite lattice structure for automoti...

What This Project Is About A straightforward, hands-on look at using lightweight, strong lattice structures made from composites to improve car crash energy abs...

BP
Blazingprojects
Read more →
Mechanical engineeri. 4 min read

Design and optimization of a passive cooling system for electric vehicle battery pac...

What This Project Is About A plain-language overview of the topic and what the project investigates. The Problem It Addresses What problem or gap this project ...

BP
Blazingprojects
Read more →
WhatsApp Click here to chat with us