DESIGN AND CONSTRUCTION OF A METALLIC BOOK SHELF

 

Table Of Contents


  • CHAPTER ONE1.0 introduction1.1 description of the metal bookshelf1.2 purpose of the project1.3 aims of the projectCHAPTER TWO2.0 Design analysis2.1 Definitions of terms2.
  • 2.Basic mathematical expression for calculation2.
  • 3.Capacity of bookshelfCHAPTER THREE3.0 Material selections3.1 Tools /equipment3.2 Construction3.
  • 3.Sequence of construction of the various partsCHAPTER FOUR4.0 Cost analysis4.
  • 1.Purpose of cost estimatingCHAPTER FIVE5.
  • 0.Maintenance guideline5.
  • 1.Recommendation5.
  • 2.ConclusionsReference

Project Abstract

This project aims at designing and constructing a book metallic shelf hose capability will be to contain different standard sizes of books at minimum paces.What is taken into consideration in this project are the cost of its production, processes, and maintenance.Other considerable factors are the functional aspect of the plant/equipment and its durability as well as the reliability. Portability, stability and the physical appearance of the entire equipment.

Project Overview

1.0 INTRODUCTIONA bookshelf is a device with partitions used for the purpose of books and files in offices, libraries and at homes.A bookshelf can be wooden, metal or glass. They could also be design in such a way that they could be dismountable or undismountable. In our project, we decided to design and construction an undismountable metallic bookshelf.Among the bookshelves, the undismountable metallic bookshelf has the longest life span because of its rigidity, quality of material and it ability to with stand heavy loads.In other words, the constant loosening and coupling of the component parts which lead to the weakness of the bolt and nut, thus subject the shelf to vibration.Our project being the undismountable bookshelf was constructed with variety of material. The type of materials involved are mild steel sheet metal, metals nets (wire gauze) etc. in this the mild steel sheets were use to cover the partitions and outside bodies of the where used in the corruption of the two doors.The essence of creating steel frame work is for it to with stand the stress that will be develop due to the weight of the material and loads on each partition. In construction, the frame was first erected before covering with the mild steel sheet. The mass and volume of the book to be contained by each partition were considered before they were erected, so certain experiment were carried out which will be discuses in detail in this report.1.1 DESCRIPTION OF THE METAL BOOKSHELF
The metal bookshelf as shown in fig.1.0 is made up of the following parts and components.
i. The frame work
ii. The side
iii. The back
iv. The doors
v. The top or plane
vi. The stand wheels
vii. The partitions
viii. The drawer
viiii. The top projectionTHE FRAME The frame shown in fig. 1.1 is the skeleton of the whole shelf, it is made of folded mild steel of bended edge 37.5mm (1 ½) and thickness of 1mm. The frame was first created together by means of welding before the sheet was covered at the back half way on each coach partitions, side, top and the partitions.
The frame was design to withstand the stress that will be develop on it due to the weight of sheet metals and load on each partition.
Fig. 1.1THE SIDEThe side as shown in Fig. 1.2 is made up of a mild steel of 1.0mm thick with height 168cm and length 85cm. It was welded to the frame (at an angle 900)The top project and the stand wheel gives the total height of the (bookshelf) side.
Fig. 1.2THE BACKThe back as shown in fig 1.3 is made of mild steel sheet of thickness 1.0mm, 168cm by height and 85cm in length and was also welded diagonally to the frame(at an angle 90) half way on each loach partitions to keep away visible book destructive agent
Fig 1.3THE DOORThe metal bookshelf has two door two loaches the left and right doors which are cohered with metal net or wire gauze respectively shown in fig. 1.4, the doors, was constructed with folded mild steel of bended edge 37 mm and cohered with wire gauze to allows the user to view inside the shelf, to know if the particular book or file he/she is searching for is in that particular bookshelf.
Fig.1.4 one side of the doorTHE TOP OR PLANEThe top as shown in fig. 1.5 is made of a mild steel sheet of thickness 1.0mm and 168 cm length by 85 cm width and it is also welded diagonally to the frame (I e at angle 90).
Fig 1.5 The plane (top)THE STAND WHEELSThe stands were made from a rectangle folded mile steel of bended edge and a fixed wheels for easy change of position. The two back stand were made from square pipe while the two front stands were made from the rectangular pipe.This stand were exerted from the frame work to enable stronger gripe, avoid bending, breaking and also fixed to wheels. The stand and wheels add to the height of the metal bookshelf to total of mm in height and there are four stands under the bookshelf attach to four wheels.THE PARTITIONS:The partitions were design to be able to contain large number of books. They are measured168 cm by height,85 cm by length and 33cm by breadth. The material used for the partitions was mild steel plate of 1.2mm thick was welded to the frame work of the partitions
The volume of the partition
= L X b x h
20cm x 33cm x20cm
= 13200cm.
Area of partition
= 2(Lb+bh+Lh)
= 2(20 x 33 + 33 x20 +20Γƒβ€”20)
=2 (660 +660+400)
= 2 (1720) = 3440cm
= 34+4m21.2 PURPOSE OF THE PROJECTThe purpose of this project is to design and construct a metallic bookshelf capable of concerning different standard size of books. The design should be able to compete favorably with other accepted standards.1.3 AIMS OF THE PROJECTThis project is aimed at providing a modification to a metallic bookshelf for offices and homes use as well as:
(i) To provide live equipment in the office that could be used for exhibition by the staff.
(ii) Improving the printing processes and quality of production and reducing cost of production.

Blazingprojects Mobile App

πŸ“š Over 50,000 Project Materials
πŸ“± 100% Offline: No internet needed
πŸ“ Over 98 Departments
πŸ” Software coding and Machine construction
πŸŽ“ Postgraduate/Undergraduate Research works
πŸ“₯ Instant Whatsapp/Email Delivery

Blazingprojects App

Related Research

Mechanical engineeri. 2 min read

Design and optimization of a passive vibration isolation system for high-precision C...

What This Project Is About A straightforward look at how to reduce unwanted vibrations in precision CNC machines using specially designed mounts made from metam...

BP
Blazingprojects
Read more →
Mechanical engineeri. 4 min read

Smart adaptive HVAC ducting system using shape memory alloy actuators for energy opt...

What This Project Is About The project looks at how to automatically adjust how air moves through a building’s ventilation ducts to save energy. It uses shape...

BP
Blazingprojects
Read more →
Mechanical engineeri. 3 min read

Design and optimization of a coupled electro-hydraulic actuation system for autonomo...

What This Project Is About A straightforward study of how to use a combination of electric motors and hydraulic components to control robotic grippers. The proj...

BP
Blazingprojects
Read more →
Mechanical engineeri. 4 min read

Design and optimization of a passive cooling system for high-power electric motors u...

What This Project Is About A plain-language overview of how a quiet, efficient cooling system can protect high-power electric motors by using layers of special ...

BP
Blazingprojects
Read more →
Mechanical engineeri. 3 min read

- Design and feasibility study of a solar-assisted heat pump for domestic water heat...

What This Project Is About This project looks at several innovative energy and engineering ideas, each aiming to combine practicality with efficiency. It covers...

BP
Blazingprojects
Read more →
Mechanical engineeri. 3 min read

Development of an autonomous, energy-efficient solar-assisted cooling system for agr...

What This Project Is About A straightforward exploration of a cooling system for greenhouses that uses solar power and special materials to keep temperatures st...

BP
Blazingprojects
Read more →
Mechanical engineeri. 2 min read

Design and optimization of a modular autonomous micro-robotic gripper for delicate o...

What This Project Is About A straightforward, hands-on project about designing a small, modular gripper that can be controlled by a computer to pick up and rele...

BP
Blazingprojects
Read more →
Mechanical engineeri. 4 min read

Development of a lightweight, high-strength composite lattice structure for automoti...

What This Project Is About A straightforward, hands-on look at using lightweight, strong lattice structures made from composites to improve car crash energy abs...

BP
Blazingprojects
Read more →
Mechanical engineeri. 3 min read

Design and optimization of a passive cooling system for electric vehicle battery pac...

What This Project Is About A plain-language overview of the topic and what the project investigates. The Problem It Addresses What problem or gap this project ...

BP
Blazingprojects
Read more →
WhatsApp Click here to chat with us