FAILURE ANALYSIS AND DEVELOPMENT OF HIGH WEAR RESISTANT LOCALLY- MANUFACTURED GOLD - MILL GRINDING PLATES

 

Table Of Contents


  • <p> </p><div><b>TABLE OF CONTENTS</b></div><div>Title page</div><div>Table of Contents</div><div>Abstract</div><div><br></div><div><b>

Chapter ONE

INTRODUCTION

  • </b></div><div>INTRODUCTION</div><div>1.
  • 0.Introduction</div><div>1.
  • 1.Background of Research</div><div>1.
  • 2.Statement of Research Problem</div><div>1.
  • 3.Justification</div><div>1.
  • 4.Aims and Objectives</div><div>1.4.
  • 1.Aim</div><div>1.4.
  • 2.The specific objectives</div><div>1.
  • 5.The Scope of the work</div><div><br></div><div><b>

Chapter TWO

LITERATURE REVIEW

  • </b></div><div>2.
  • 0.LITERATURE REVIEW</div><div>2.
  • 1.Failure Analysis Overview</div><div>2.
  • 2.Causes of Failure</div><div>2.
  • 3.Wear Mechanisms as Agent of Failure</div><div>2.3.
  • 1.Adhesive Wear</div><div>2.3.
  • 2.Abrasive Wear</div><div>2.
  • 4.Failure Induced by Ore Hardness Values</div><div>2.
  • 5.Mill used for Grinding Mineral</div><div>2.
  • 6.Minimization of Failure through Wear Reduction</div><div>2.
  • 7.Materials used for Grinding Mineral Ores</div><div>2.
  • 8.Carbon Equipment Value (C.E.V)</div><div>2.
  • 9.Effects of Some Alloying Elements in Cast iron</div><div><br></div><div><b>

Chapter THREE

RESEARCH METHODOLOGY

  • </b></div><div>3.
  • 0.MATERIALS, EQUIPMENT AND GENERAL EXPERIMENTAL PROCEDURES</div><div>3.
  • 1.Materials</div><div>3.
  • 2.Equipment</div><div>3.
  • 3.0Methodology</div><div>3.3.
  • 1.Determination of the hardness of the as-received and developed samples</div><div>3.3.
  • 2.Impact strength determination of the as-received and developed samples</div><div>3.3.
  • 3.The development of new high wear resistant grinding plates</div><div>3.3.
  • 4.Determination of wear rate of the plates</div><div>3.3.
  • 5.Microstructural assessment of the samples</div><div>3.3.
  • 6.Characterization of the gold-bearing mineral</div><div>3.3.
  • 7.Characterization of the as-received grinding plates</div><div>3.3.
  • 8.Determination of the work index of the gold bearing minerals</div><div><br></div><div><b>

Chapter FOUR

DATA PRESENTATION AND ANALYSIS

  • </b></div><div>4.
  • 0.RESULTS</div><div>4.
  • 1.Hardness Values</div><div>4.
  • 2.Impact Values</div><div>4.
  • 3.Wear Rate Results</div><div>4.
  • 4.Average Wear Rate of the Investigated Samples and their Corresponding Hardness Values</div><div>4.
  • 5.Microstructural results</div><div>4.
  • 6.Highlighted in tables 4.8-
  • 4.11are the chemical analysis results of the gold-bearing minerals sample 1 and 2, the as-received grinding plates sample A and B and the hardness and impact values of the mineral samples</div><div>4.
  • 7.The Work index of the Minerals</div><div><br></div><div><b>

Chapter FIVE

SUMMARY, CONCLUSION AND RECOMMENDATIONS

  • </b></div><div>5.
  • 0.DISCUSSION OF THE EXPERIMENTAL RESULTS</div><div>5.1.
  • 0.Mechanical Properties of the Investigated Samples</div><div>5.1.
  • 1.Hardness properties of the as-received and developed samples</div><div>5.1.
  • 2.The impact strength of the as- received and developed samples</div><div>5.2.
  • 0.Wear Rate Values of the Investigated Samples</div><div>5.2.
  • 1.&nbsp; As- received sample A</div><div>5.2.
  • 2.&nbsp; As- received sample B</div><div>5.2.
  • 3.Developed sample C</div><div>5.2.
  • 4.Developed sample D</div><div>5.
  • 3.Correlation between the Average Wear Rate and Hardness Values</div><div>5.
  • 4.Microstructural Analysis of the Investigated Samples</div><div>5.4.
  • 1.As- received sample A</div><div>5.4.
  • 2.As- received sample B</div><div>5.4.
  • 3.Developed sample C</div><div>5.4.
  • 4.Developed sample D</div><div>5.
  • 5.The Chemical Analysis of Gold-bearing Minerals</div><div>5.
  • 6.The Chemical Analysis of the As- received Grinding Plates Samples</div><div>5.
  • 7.The Work index of the Gold-Bearing Minerals</div><div>5.
  • 8.Cost to Manufacture New Grinding Plates</div><div><br></div><div><b>CHAPTER SIX</b></div><div>6.
  • 0.SUMMARY, CONCLUSIONS AND RECOMMENDATIONS</div><div>6.
  • 1.Summary</div><div>6.
  • 2.Conclusions</div><div>6.
  • 3.Recommendations</div><div>6.
  • 4.Contribution to Knowledge</div><div>REFERENCES</div>APPENDICES <br><p></p>

Project Abstract

<p> </p><div><b></b></div><div>The research work is centered on the failure analysis of the as-received locally produced grinding plates, development of high wear resistant grinding plates capable of grinding gold-bearing mineral deposit in Bagega village of Zamfara State. The work was carried out by evaluating the chemical compositions of the as-received grinding plate samples, the compositions of the gold-bearing mineral samples, the microstructures of the as- received and developed grinding plate samples, mechanical properties (impact strength, hardness values) and wear rate of the as-received and developed grinding plates using Optical Emission spectroscopy (OES), Energy Dispersive X-ray Fluoresce (ED-XRF), Metallurgical microscope, impact and hardness testing machine, and the grinding machine. The analysis showed that the as-received locally produced grinding plate samples were grey cast iron with pearlite structure as the major matrix together with few cementite structures, generally characterized by poor mechanical properties. This explained the wear resistance of the samples in supporting grinding of the charged mineral for a longer period thereby prompting the samples to wear and fracture quickly in service. The two locally developed white iron base grinding plate samples showed a remarkable improvement in mechanical properties and wear resistant ability with increase in grinding duration from thirty two to seventy five minutes due to the presence of alloying elements that are capable of promoting abrasive wear resistant in comparism with the as-received failed grinding plates.</div><br> <br><p></p>

Project Overview

<p> </p><div><div><b>1.0. Introduction</b></div><div>Failure analysis is the process of collecting and analyzing data to determine the cause or causes of failure in general. It is the process by which scientists, technologists, engineers and business analysts use to assess the failure mechanism of any component in service that failed. It is an important area in every manufacturing industry (Neville, 2011).</div><div><br></div><div>Due to one reason or the other, machine component often experiences one form of service failure- the consequences which could include death and financial losses. Legal ramifications have encouraged the development of effective failure analysis method. While the cost of failure analysis may exceed the value of the part damaged, in some instances the cost of service failures usually far exceeds the cost of failure analysis (Neville, 2011).</div><div><br></div>Machine components may fail either as a result of the environmental conditions they are exposed to or the kind of stresses they experience. Often a combination of both environmental and stress condition can cause failure. In essence, these components are designed to withstand both the environmental condition and the stress they will be subjected to in service so that they can serve optimally in life. The designing of a metallic component involves not only a specific elemental compositions, it involves also specific aspect of materials selection processes such as, machining process, heat treatment, experience and skills of the producers. The huge arrays of different metals that exist have unique physical and chemical properties; specific properties are incorporated into metallic components to make them more robust to environmental conditions (Thomas, <i>et al</i>&nbsp;1999).....</div><br> <br><p></p>

Blazingprojects Mobile App

πŸ“š Over 50,000 Project Materials
πŸ“± 100% Offline: No internet needed
πŸ“ Over 98 Departments
πŸ” Software coding and Machine construction
πŸŽ“ Postgraduate/Undergraduate Research works
πŸ“₯ Instant Whatsapp/Email Delivery

Blazingprojects App

Related Research

Materials and Metall. 3 min read

Development of biodegradable metal matrix composites for orthopedic implants using m...

What This Project Is About A clear, plain-language look at biodegradable metal matrix composites made from magnesium alloys reinforced with natural fibers and n...

BP
Blazingprojects
Read more →
Materials and Metall. 2 min read

Nano-Composite Reinforced Lightweight Steel Using Graphene and Ceramic Particulates ...

What This Project Is About This project looks at making steel lighter yet strong by adding tiny amounts of graphene and ceramic particles. Graphene is a single ...

BP
Blazingprojects
Read more →
Materials and Metall. 3 min read

Development of a low-temperature self-healing ceramic composite using microencapsula...

What This Project Is About A straightforward exploration of a ceramic material that can repair itself after small damages, using tiny capsules that melt and ref...

BP
Blazingprojects
Read more →
Materials and Metall. 2 min read

Development of a sustainable lightweight high-entropy alloy (L-HEA) with gradient mi...

What This Project Is About A simple, clear look at developing a lighter, durable metal alloy made from several elements in a smart way. The goal is to combine l...

BP
Blazingprojects
Read more →
Materials and Metall. 4 min read

Design and fabrication of a lightweight high-strength aluminum alloy composite for a...

What This Project Is About The project explores making a lightweight, strong composite material by combining a common aluminum alloy with recycled ceramic and p...

BP
Blazingprojects
Read more →
Materials and Metall. 2 min read

Development of a Zero-Waste Scrap Steel Alloy through Powder Metallurgy and Additive...

What This Project Is About A plain-language overview of the topic and what the project investigates. The Problem It Addresses Explains the waste created when s...

BP
Blazingprojects
Read more →
Materials and Metall. 2 min read

Development of a scalable low-temperature amorphous steel alloy via rapid solidifica...

What This Project Is About A simple, beginner-friendly look at making a special metal (amorphous steel) that stays soft and strong at lower temperatures. The pr...

BP
Blazingprojects
Read more →
Materials and Metall. 4 min read

Development of High-Entropy Alloy–Based Lightweight Steel for Automotive Structura...

What This Project Is About A practical exploration of creating a strong yet light steel by combining multiple elements in a controlled alloy, aiming to improve ...

BP
Blazingprojects
Read more →
Materials and Metall. 4 min read

Development of a low-temperature solid-state recycling process for aluminum alloy sc...

What This Project Is About A plain-language overview of developing a method to recycle aluminum scrap using low-temperature, solid-state processes that improve ...

BP
Blazingprojects
Read more →
WhatsApp Click here to chat with us