📚 Over 50,000 Project Materials
📱 100% Offline: No internet needed
📝 Over 98 Departments
🔍 Project Journal Publishing
🎓 Undergraduate/Postgraduate
📥 Instant Whatsapp/Email Delivery
Showing 1-270 of 316 projects
<p> One of the major challenges in reservoir engineering is the accurate description of the reservoir. This description is essential in all aspects of ...
<p> This research work mainly investigates the development and the behavior of cones (both water and gas cones) in oil reservoirs supported by strong a...
<p> </p><p>Formation of water-in-oil emulsions are among the major challenges encountered by production and surface facilities engineers du...
<p> </p><p>This research work mainly investigates the implication of void prediction in the estimation of total pressure gradient in vertic...
<p> </p><p>Gas condensate reservoirs are single phase at the initial condition. It changes to multiphase when the reservoir conditions are ...
<p> </p><p>Reservoir development planning and well placement significantly affect hydrocarbon recovery. Therefore, strategic well placement...
...
<p> </p><p>This study presents an investigation of the hydrodynamics behaviour of slug flow in an inclined (80 degree inclination) and 67 m...
<p> </p><p>Computer software is used extensively to increase productivity and reduce man’s hours of labour. This work presents the de...
<p> </p><p>Cuttings transportation during in non-vertical boreholes is necessary for oil and gas wells. Adequate cuttings removal from a we...
<p> A poor description of the reservoir characteristics usually poses a unique problem<br>in exploration and production there by leading to poor ...
<p> </p><p>Determination of optimal well locations for infill drilling is a challenging task because engineering and geologic variables aff...
<p> </p><p>With the ever increasing need to optimize production, the accurate understanding of the mechanics of multi-phase flow and its ef...
<p> </p><p>Pressure build-up data in low permeability reservoirs take too long and are usually of poor quality. A pressure buildup test is ...
<p> </p><p>Energy demand in the world today is increasing rapidly and energy generation and resources in the world are incapable of caterin...
<p> Despite its numerous benefits the search and production of crude oil poses a lot of dangers to the environment. Among these include land, water and...
<p> </p><p>Petroleum Fiscal System (PFS) is a major determinant of investment decision in the exploration and production of oil and gas in ...
<p> </p><p>The design of natural flow and artificial lift tubing strings for the whole life of a water drive reservoir was carried out usin...
...
<p> </p><p>New sources of energy should be found to relieve the high demand of energy. Even though heavy oil and bitumen are difficult to p...
<p> </p><p>Hydrocarbon production in the petroleum industry is often constrained by reservoir heterogeneity, deliverability and capacity of...
<p> In the present day oil and gas industry, the chemicals used as pH controller are usually imported at an exorbitant price – which take a large...
<p> Every Natural gas well ceases producing as reservoir pressure depletes. The usual liquid presence in the reservoir can cause further problems by ac...
<p> </p><p>A new method for analysing productivity index (PI) on vertical wells is the main objective of this study. Well performance is of...
<p> </p><p>Conventional methods used in determining initial gas-in-place and reserves for a dry gas reservoir entails the use of P/z vs cum...
<p> Monitoring and maintenance is a continuous process in the various phases of a well’s life. One of the essential part of monitoring is well te...
...
<p> Maximum production from an oil well can be achieved through proper selection of tubing size. The selection of optimum tubing size must be evaluated...
<p> </p><p>Solution gas drive reservoirs are characterized by rapid and continuous decline of reservoir pressure. This rapid and continuous...
<p> </p><p>Foam are substances that are been formed when pockets of gases are trapped in a liquid or solid. Foam stabilizations are caused ...