IMPROVING THE CAPACITY OF A RENEWABLE POWER SYSTEM, USING SOLAR POWER PANEL (A CASE STUDY OF COMPUTER SCIENCE ND SOFTWARE LAB)

Project Abstract

The integration of renewable energy sources into power systems has become a key focus in addressing climate change and transitioning towards sustainable energy solutions. Solar power, in particular, has gained significant attention due to its abundance and potential to generate clean electricity. This research project aims to improve the capacity of a renewable power system by implementing solar power panels in a case study of a computer science and software lab. The study will involve assessing the energy requirements of the lab, analyzing the solar potential of the location, designing a solar power system that meets the energy needs of the lab, and implementing the system to evaluate its performance. By utilizing solar power panels, the research seeks to reduce the lab's dependency on grid electricity, lower energy costs, and minimize carbon emissions associated with traditional power generation. The research methodology will include conducting an energy audit of the lab to determine its energy consumption patterns and requirements. This will be followed by a site assessment to evaluate the solar irradiance levels and available space for installing solar panels. Based on these assessments, a solar power system will be designed using appropriate technologies such as photovoltaic panels, inverters, and energy storage systems to ensure a reliable and efficient energy supply. The implementation phase will involve installing the solar power panels on the lab's rooftop or surrounding area, connecting the system to the lab's electrical infrastructure, and monitoring its performance over an extended period. Data on energy generation, consumption, and savings will be collected and analyzed to assess the system's effectiveness in meeting the lab's energy needs. The outcomes of this research project are expected to demonstrate the feasibility and benefits of integrating solar power into the energy mix of a computer science and software lab. The findings will provide insights into the technical, economic, and environmental aspects of using solar power panels to enhance the capacity of a renewable power system. Additionally, the research will contribute to the growing body of knowledge on renewable energy integration and help promote sustainable energy practices in educational and research institutions.

Project Overview

<p> </p><p><strong>INTRODUCTION</strong></p><p><strong>1.1 &nbsp; BACKGROUND TO THE STUDY</strong></p><p>The use of renewable energy increased greatly just after the first big oil crisis in the late seventies. At that time, economic issues were the most important factors, hence interest in such processes decreased when oil prices fell. The current resurgence of interest in the use of renewable energy is driven by the need to reduce the high environmental impact of fossil-based energy systems. Harvesting energy on a large scale is undoubtedly one of the main challenges of our time. Future energy sustainability depends heavily on how the capacity of renewable energyis improved in the next few decades.</p><p>Although in most power-generating systems, the main source of energy (the fuel) can be manipulated, this is not true for solar and wind energies (Valenzuela, et al, 2004). The main problems with these energy sources are cost and availability, wind and solar power are not always available where and when needed. Unlike conventional sources of electric power, these renewable sources are not “dispatchable”—the power output cannot be controlled. Daily and seasonal effects and limited predictability result in intermittent generation. Some manufacturers has released products to facilitate the integration of renewable energy but the researcher is examining ways of improving the capacity of renewable power system using solar power panel (Camacho et al, 2007).</p><p>Industry must overcome a number of technical issues to deliver renewable energy in significant quantities. Control is one of the key enabling technologies for the deployment of renewable energy systems. Solar power requires effective use of advanced control techniques. In addition, reliable electric supply cannot be achieved without extensive use of control technologies at all levels.</p><p>Solar power plant exhibit changing dynamics, nonlinearities, and uncertainties—challenges that require advanced control strategies to solve effectively. The use of more efficient control strategies would not only increase the performance of these systems, but would increase the number of operational hours of solar and wind plants and thus reduce the cost per kilowatt-hour (KWh) produced.</p><p>The solar have tremendous potential for fulfilling the world’s energy needs (White House, 2010).</p><p>One of the greatest scientific and technological opportunities researchers are faced with is approaches to developing efficient ways to collect, convert, store, and utilize solar energy at an affordable cost. The solar power reaching the earth’s surface is about 86,000 TW. Covering 0.22% of our planet with solar collectors with an efficiency of 8% would be enough to satisfy the current global power consumption. Estimates are that an energy project utilizing concentrating solar power (CSP) technology deployed over an area of approximately 160 x 160 km in the Southwest U.S. could produce enough power for the entire U.S. consumption.</p><p>Solar-sourced electricity can be generated either directly using photovoltaic (PV) cells or indirectly by collecting and concentrating the solar power to produce steam, which is then used to drive a turbine to provide the electric power (CSP).</p><p>Concentrating solar thermal systems use optical devices (usually mirrors) and sun-tracking systems to concentrate a large area of sunlight onto a smaller receiving area. The concentrated solar energy is then used as a heat source for a conventional power plant. A wide range of concentrating technologies exists, the main ones being parabolic troughs, solar dishes, linear Fresnel reflectors, and solar power towers. The primary purpose of concentrating solar energy is to produce high temperatures and therefore high thermodynamic efficiencies.</p><p>Parabolic trough systems are the most commonly used CSP technology. A parabolic trough consists of a linear parabolic mirror that reflects and concentrates the received solar energy onto a tube (receiver) positioned along the focal line. The heat transfer fluid is pumped through the receiver tube and picks up the heat transferred through the receiver tube walls. The parabolic mirror follows the sun by tracking along a single axis. Linear Fresnel reflectors use various thin mirror strips to concentrate sunlight onto tubes containing heat transfer fluid. Higher concentration can be obtained, and the mirrors are cheaper than parabolic mirrors, but a more complex tracking mechanism is needed.</p><p><strong>1.2 &nbsp; STATEMENT OF THE PROBLEM</strong></p><p>The uncertainty and intermittency of solar generation are major complications that must be addressed before the full potential of this renewable power system can be reached. The researcher provides an overview of a solar power panel withan evolution of electricity networks toward greater reliance on communications, computation, and control which is a way aimed at improving it.</p><p>The application of advanced digital technologies (i.e., microprocessor-based measurement and control, communications, computing, and information systems) which are expected to greatly improve the reliability, security, interoperability, and efficiency of the electrical grid, while reducing environmental impacts and promoting economic growth will be considered.</p><p><strong>1.3 &nbsp; OBJECTIVES OF THE STUDY</strong></p><p>The following are the objectives of this study:</p><ol><li>To provide an overview on renewable power system and its capacity.</li><li>To examine ways of improving the capacity of renewable power system using the solar power panel.</li><li>To identify the limitations of solar power system</li></ol><p><strong>1.4 &nbsp; RESEARCH QUESTIONS</strong></p><ol><li>What is renewable power system and its capacity?</li><li>What are the ways of improving the capacity of renewable power system using the solar power panel?</li><li>What are the limitations of solar power system?</li></ol><p><strong>1.6 &nbsp; SIGNIFICANCE OF THE STUDY</strong></p><p>The following are the significance of this study:</p><ol><li>Findings from this study will educate students on renewable power system with emphasis on solar power system.</li><li>It will educate researchers on methods of improving the existing solar power technology.</li><li>This research will also serve as a resource base to other scholars and researchers interested in carrying out further research in this field subsequently, if applied will go to an extent to provide new explanation to the topic.</li></ol><p><strong>1.7 &nbsp; SCOPE/LIMITATIONS OF THE STUDY</strong></p><p>This study will cover approaches at improving the existing solar power technology with a view of optimizing the operation of the system and minimizing environmental impacts.</p> <br><p></p>