Preparation of soap using different types of oils and exploring it’s properties

 

Table Of Contents


  • <p> </p><p>

Chapter ONE

INTRODUCTION

  • </p><p>Introduction</p><p>

Chapter TWO

LITERATURE REVIEW

  • </p><p>Literature Review</p><p>2.1</p><p>Semi Boiled Process</p><p>2.2</p><p>Full Boiled</p><p>2.3</p><p>Cold Process</p><p>2.4</p><p>Different types of soap making oils</p><p>2.5</p><p>Castor Oil</p><p>2.6</p><p>Olive Oil</p><p>2.7</p><p>Neem Oil</p><p>3.1</p><p>Coconut Oil</p><p>

Chapter THREE

RESEARCH METHODOLOGY

  • </p><p>Materials and Methods</p><p>3.1</p><p>Materials Required</p><p>3.2</p><p>Methodology</p><p>3.2.1</p><p>Preparation of Soap</p><p>3.2.2</p><p>Comparing different</p><p>properties of soap with detergent</p><p>3.2.3</p><p>Blending of Oils</p><p>3.2.4</p><p>Calculation of TFM</p><p>3.2.5</p><p>Calculation of free alkali</p><p>3.2.6</p><p>Analysis of the best blend</p><p>3.2.7</p><p>Saponification Value</p><p>3.2.8</p><p>Iodine Value</p><p>3.2.9</p><p>Unsaponifiable Matter</p><p>3.2.10</p><p>Acid Value</p><p>

Chapter FOUR

DATA PRESENTATION AND ANALYSIS

  • </p><p>Results and Discussion</p><p>4.1</p><p>Comparison of soap and detergent</p><p>4.2</p><p>Properties of soap after blending of oils</p><p>4.3</p><p>TFM values of soaps</p><p>4.4</p><p>Analysis of the best blend</p><p>4.5</p><p>Saponification Values</p><p>4.5</p><p>Iodine Values</p><p>4.6</p><p>Unsaponifiable Matter</p><p>4.7</p><p>Acid Value</p><p>

Chapter FIVE

SUMMARY, CONCLUSION AND RECOMMENDATIONS

  • </p><p>Conclusion</p><p>Chapter 6</p><p>References</p><p>List of Tables</p><p>Sl.no.</p><p>Name of the table</p><p>Page</p><p>no.</p><p>1</p><p>Composition of coconut oil</p><p>13</p><p>2</p><p>Yield of soap using individual oils</p><p>23</p><p>3</p><p>Properties of soap versus detergent</p><p>23</p><p>4</p><p>Moisture and Hardness of soap samples from</p><p>24</p><p>individual oils</p><p>5</p><p>Yield and pH values of soap samples from blending of</p><p>24</p><p>oils</p><p>6</p><p>Lathering and cleansing power of soap samples from</p><p>25</p><p>blending of oils</p><p>7</p><p>Moisture and Hardness of soap samples from blending</p><p>26</p><p>of oils</p><p>8</p><p>Total fatty matter of best blends of oils</p><p>27</p><p>9</p><p>Saponification value of the oil blend</p><p>28</p><p>10</p><p>Iodine value of the oil blend</p><p>28</p><p>11</p><p>Unsaponifiable matter</p><p>29</p><p>12</p><p>Acid Value of the oil blend</p><p>30</p> <br><p></p>

Project Abstract

<p> Soaps are the sodium salts or potassium salts of stearic acids or any other fatty acids. They are prepared by the saponification process, which is, reacting the oil which contain triglycerides with caustic soda (NaOH) to give the soap. However different oils have different composition of fatty acids which are responsible for different properties of soaps made out of them. In the present work 5 different types of oils are taken. They are blended in various ratios to prepare 14 different samples of soap. Different properties of these samples were analyzed to see which soap is the best one. The cleansing and lathering properties of all samples were compared. The blend of coconut oil and castor oil at 31 ratio is found out to be the best with 76.8% of TFM and 89.46% of yield. The best blend is analyzed for various properties and they were compared with that given in the literature. The saponification values, iodine values of coconut oil and castor oil were found out and these values were also found for the blend. It was found that the blend was having SAP value of 230.4 and iodine value of 40 which are higher than the individual values. Thus soap prepared using blend of both these oils has better properties than the soaps prepared by individual oils. <br></p>

Project Overview

Blazingprojects Mobile App

📚 Over 50,000 Project Materials
📱 100% Offline: No internet needed
📝 Over 98 Departments
🔍 Software coding and Machine construction
🎓 Postgraduate/Undergraduate Research works
📥 Instant Whatsapp/Email Delivery

Blazingprojects App

Related Research

Electrical electroni. 4 min read

Design and Implementation of an IoT-Based Smart Energy Meter System...

What This Project Is About This project focuses on designing and building a smart energy meter that uses the Internet of Things (IoT) technology. Essentially, i...

BP
Blazingprojects
Read more →
Electrical electroni. 3 min read

Design and Implementation of a Smart Renewable Energy Management System...

What This Project Is About This project involves creating a system that helps manage renewable energy sources like solar panels and wind turbines more efficient...

BP
Blazingprojects
Read more →
Electrical electroni. 2 min read

Design and Implementation of a Smart Energy Management System Using IoT...

What This Project Is About This project focuses on creating a smart system to control and save energy in homes or buildings by using the Internet of Things (IoT...

BP
Blazingprojects
Read more →
Electrical electroni. 3 min read

Design and Implementation of a Solar-Powered Smart Street Lighting System...

This project focuses on creating a smart street lighting system powered by the sun’s energy. The idea is to design street lights that automatically turn on at...

BP
Blazingprojects
Read more →
Electrical electroni. 2 min read

Design and Implementation of a Smart Microgrid Energy Management System...

This project is about designing and building a smart system to better manage energy in small power grids called microgrids. A microgrid is like a small, local v...

BP
Blazingprojects
Read more →
Electrical electroni. 4 min read

Design and Implementation of a Smart Solar-Powered Charge Controller System...

This project is about creating a smart system that helps manage how solar energy is stored and used in batteries through a device called a charge controller. A ...

BP
Blazingprojects
Read more →
Electrical electroni. 4 min read

Design and Implementation of an Intelligent Energy Management System for Smart Build...

The project titled &quot;Design and Implementation of an Intelligent Energy Management System for Smart Buildings&quot; focuses on the development of a sophisti...

BP
Blazingprojects
Read more →
Electrical electroni. 2 min read

Design and Implementation of an Intelligent Energy Management System for Smart Grid ...

The project topic &quot;Design and Implementation of an Intelligent Energy Management System for Smart Grid Applications&quot; focuses on the development and de...

BP
Blazingprojects
Read more →
Electrical electroni. 2 min read

Design and Implementation of Smart Home Energy Management System using IoT Technolog...

The project on &quot;Design and Implementation of Smart Home Energy Management System using IoT Technology&quot; aims to develop a cutting-edge system that leve...

BP
Blazingprojects
Read more →
WhatsApp Click here to chat with us