Preparation of soap using different types of oils and exploring it’s properties

 

Table Of Contents


  • <p> </p><p>

Chapter ONE

INTRODUCTION

  • </p><p>Introduction</p><p>

Chapter TWO

LITERATURE REVIEW

  • </p><p>Literature Review</p><p>2.1</p><p>Semi Boiled Process</p><p>2.2</p><p>Full Boiled</p><p>2.3</p><p>Cold Process</p><p>2.4</p><p>Different types of soap making oils</p><p>2.5</p><p>Castor Oil</p><p>2.6</p><p>Olive Oil</p><p>2.7</p><p>Neem Oil</p><p>3.1</p><p>Coconut Oil</p><p>

Chapter THREE

RESEARCH METHODOLOGY

  • </p><p>Materials and Methods</p><p>3.1</p><p>Materials Required</p><p>3.2</p><p>Methodology</p><p>3.2.1</p><p>Preparation of Soap</p><p>3.2.2</p><p>Comparing different</p><p>properties of soap with detergent</p><p>3.2.3</p><p>Blending of Oils</p><p>3.2.4</p><p>Calculation of TFM</p><p>3.2.5</p><p>Calculation of free alkali</p><p>3.2.6</p><p>Analysis of the best blend</p><p>3.2.7</p><p>Saponification Value</p><p>3.2.8</p><p>Iodine Value</p><p>3.2.9</p><p>Unsaponifiable Matter</p><p>3.2.10</p><p>Acid Value</p><p>

Chapter FOUR

DATA PRESENTATION AND ANALYSIS

  • </p><p>Results and Discussion</p><p>4.1</p><p>Comparison of soap and detergent</p><p>4.2</p><p>Properties of soap after blending of oils</p><p>4.3</p><p>TFM values of soaps</p><p>4.4</p><p>Analysis of the best blend</p><p>4.5</p><p>Saponification Values</p><p>4.5</p><p>Iodine Values</p><p>4.6</p><p>Unsaponifiable Matter</p><p>4.7</p><p>Acid Value</p><p>

Chapter FIVE

SUMMARY, CONCLUSION AND RECOMMENDATIONS

  • </p><p>Conclusion</p><p>Chapter 6</p><p>References</p><p>List of Tables</p><p>Sl.no.</p><p>Name of the table</p><p>Page</p><p>no.</p><p>1</p><p>Composition of coconut oil</p><p>13</p><p>2</p><p>Yield of soap using individual oils</p><p>23</p><p>3</p><p>Properties of soap versus detergent</p><p>23</p><p>4</p><p>Moisture and Hardness of soap samples from</p><p>24</p><p>individual oils</p><p>5</p><p>Yield and pH values of soap samples from blending of</p><p>24</p><p>oils</p><p>6</p><p>Lathering and cleansing power of soap samples from</p><p>25</p><p>blending of oils</p><p>7</p><p>Moisture and Hardness of soap samples from blending</p><p>26</p><p>of oils</p><p>8</p><p>Total fatty matter of best blends of oils</p><p>27</p><p>9</p><p>Saponification value of the oil blend</p><p>28</p><p>10</p><p>Iodine value of the oil blend</p><p>28</p><p>11</p><p>Unsaponifiable matter</p><p>29</p><p>12</p><p>Acid Value of the oil blend</p><p>30</p> <br><p></p>

Project Abstract

<p> Soaps are the sodium salts or potassium salts of stearic acids or any other fatty acids. They are prepared by the saponification process, which is, reacting the oil which contain triglycerides with caustic soda (NaOH) to give the soap. However different oils have different composition of fatty acids which are responsible for different properties of soaps made out of them. In the present work 5 different types of oils are taken. They are blended in various ratios to prepare 14 different samples of soap. Different properties of these samples were analyzed to see which soap is the best one. The cleansing and lathering properties of all samples were compared. The blend of coconut oil and castor oil at 31 ratio is found out to be the best with 76.8% of TFM and 89.46% of yield. The best blend is analyzed for various properties and they were compared with that given in the literature. The saponification values, iodine values of coconut oil and castor oil were found out and these values were also found for the blend. It was found that the blend was having SAP value of 230.4 and iodine value of 40 which are higher than the individual values. Thus soap prepared using blend of both these oils has better properties than the soaps prepared by individual oils. <br></p>

Project Overview

Blazingprojects Mobile App

📚 Over 50,000 Project Materials
📱 100% Offline: No internet needed
📝 Over 98 Departments
🔍 Software coding and Machine construction
🎓 Postgraduate/Undergraduate Research works
📥 Instant Whatsapp/Email Delivery

Blazingprojects App

Related Research

Electrical electroni. 2 min read

Smart Grid Demand Response Control Using Edge Analytics and Renewable Integration N...

What This Project Is About A beginner-friendly explanation of how smart grids can adjust electricity use in real time by using local data and small edge devices...

BP
Blazingprojects
Read more →
Electrical electroni. 2 min read

Smart Grid Fault Detection and Localization Using Distributed Sensor Networks...

What This Project Is About A straightforward look at how smart grids can quickly detect faults and pinpoint where they occur by using a network of small, inexpe...

BP
Blazingprojects
Read more →
Electrical electroni. 4 min read

Smart Grid Fault Detection using IoT-based Sensor Network Note: If you want more op...

What This Project Is About Develop a system that can monitor the electrical grid in real time using small sensors and internet connectivity. The project investi...

BP
Blazingprojects
Read more →
Electrical electroni. 2 min read

Smart Low-Cost IoT-Based Energy Management System for Microgrids...

What This Project Is About A plain-language overview of how small energy systems can be monitored and controlled using affordable sensors and internet tools to ...

BP
Blazingprojects
Read more →
Electrical electroni. 4 min read

Smart Grid Fault Detection and Localization using Hybrid Fuzzy-Neural Network and Ph...

What This Project Is About This project explores how a smart electrical grid can automatically detect and locate faults using a combination of fuzzy logic (huma...

BP
Blazingprojects
Read more →
Electrical electroni. 4 min read

Smart LVDC Microgrid with Real-Time Energy Management and Batteryless Solar Inverter...

What This Project Is About This project explores a small-scale, low-voltage direct current (LVDC) microgrid that can manage energy in real time. It also investi...

BP
Blazingprojects
Read more →
Electrical electroni. 2 min read

Smart Grid Demand Response using IoT and Machine Learning for Energy Optimization...

What This Project Is About A practical study that looks at how a smart electrical grid can respond to changing electricity use in real-time. It combines Interne...

BP
Blazingprojects
Read more →
Electrical electroni. 4 min read

Smart Grid Fault Detection and Isolation Using IoT and Machine Learning...

What This Project Is About A plain-language overview of how smart grids, real-time monitoring, and learning algorithms work together to detect faults in electri...

BP
Blazingprojects
Read more →
Electrical electroni. 3 min read

Smart Grid Fault Detection and Isolation Using IoT-Enabled Phasor Measurement Units ...

What This Project Is About A plain-language overview of the topic and what the project investigates. The Problem It Addresses What problem or gap this project ...

BP
Blazingprojects
Read more →
WhatsApp Click here to chat with us