Design And Construction Of A 3 Way Inter Communication System

 

Table Of Contents


  • Title PageCertificationDedicationAcknowledgementAbstractTable Of ContentsChapter One1.0 IntroductionChapter Two2.0 Complete Circuit Description2.1 Simplified Block Diagram Of Thee 3-Way Intercom System2.2 Operation PrinciplesChapter Three3.0 Icc1212c3.1 Resistor
  • 3.2Capacitor
  • 3.3Condenser Microphone3.4 Loudspeakers3.5 Switches3.6 Communication CablesChapter Four4.0 Circuitry Design And Description
  • 4.1Description Of Power Supply Unit Circuit4.2 Description Of The Tone Generator Circuit4.3 Circuit Diagram Of The Three Units And Explanation4.4 Explanation Of The Switching CircuitChapter Five5.0 Construction And Packaging
  • 5.01Component Sourcing5.1 Construction And Testing
  • 5.2Audio Amplifying Stage5.3 Prototype5.4 Trouble Shooting5.5 PackagingChapter Six6.0 Conclusion6.1 Further Study And DesignReferenceAppendix

Project Abstract

An intercommunication system is nothing but the communication between two or more persons not close to one another. This does not mean we should categorize telephones, fax, teleprinters, telegraphs etc. an example of intercom system sine they are used in communication between people. Infact, intercom involves short distance places. It is limited in electronics, offices, and hospitals. The intercom system under is a three way station type. This means that a person can communicate to the other at another station at his own convenient time. They call once another attention by the use of the tone generated by the use of tone generator.Depress a button and the tone sounds, and the same switch is thrown to the intercom circuit thus they communicate.This system to be used in solving the problem of poor communication in our department. Besides, it can be extended to some other offices by the addition this one may use a rotary switch.

Project Overview

1.0 INTRODUCTION
Electronic inter communication is the process of exchanging information between individuals over relatively long distance by the use of electronic system connected together by communication cables or the instrument cable or satellite links. A telephone system and an intercom system can be used to achieve intercommunication.
In the department of Electrical/Electronics Engineering, Institute of Management and Technology, Enugu, there exists the need for intercommunication between all the offices in the department so as to enable the smooth running of activities. Where by information and ideas are exchanged between the individuals concerned just at the press of a button. To achieve this kind of situation and economical means of electronic communication was considered.
Thus the intercom system was chosen so as interconnect the three offices earlier specified. Other offices can also be attached/ connected to the system as time goes on since thee is room for modification. One may ask why the telephone system not considered since it is also another system of intercommunication. The telephone system is equally better but less appropriate since it requires a dedicated line form NITEL who charges bills accordingly. The intercom system only makes use of the physical communication cables interlinking the handsets concerned. Also, the telephone system requires PABX system (Private Automatic Box Exchange) for effective communication between the concerned telephone sets. The PABX is a high capacity telephone switching equipment that automatically connects a call to the desired route or extension number. It equally handles both external call and internal call. The telephone set or system is more appropriate for a whole educational complex or
company. It is not appropriate to use the telephone for the connectivity of few offices as this under-utilizes the capacity of the PABX since they are designed to handle high capacity of lines. Bearing cost in mind, the 3-way intercom units is cheaper to construct when compared to the cost of procuring PABX system talkless of design and construction.
By embarking on the 3-way intercom, this believed that an efficient communication gadget or communication link between the offices shall be achieved.

Blazingprojects Mobile App

📚 Over 50,000 Project Materials
📱 100% Offline: No internet needed
📝 Over 98 Departments
🔍 Software coding and Machine construction
🎓 Postgraduate/Undergraduate Research works
📥 Instant Whatsapp/Email Delivery

Blazingprojects App

Related Research

Electrical electroni. 3 min read

Smart Grid Demand Response Control Using Edge Analytics and Renewable Integration N...

What This Project Is About A beginner-friendly explanation of how smart grids can adjust electricity use in real time by using local data and small edge devices...

BP
Blazingprojects
Read more →
Electrical electroni. 2 min read

Smart Grid Fault Detection and Localization Using Distributed Sensor Networks...

What This Project Is About A straightforward look at how smart grids can quickly detect faults and pinpoint where they occur by using a network of small, inexpe...

BP
Blazingprojects
Read more →
Electrical electroni. 4 min read

Smart Grid Fault Detection using IoT-based Sensor Network Note: If you want more op...

What This Project Is About Develop a system that can monitor the electrical grid in real time using small sensors and internet connectivity. The project investi...

BP
Blazingprojects
Read more →
Electrical electroni. 3 min read

Smart Low-Cost IoT-Based Energy Management System for Microgrids...

What This Project Is About A plain-language overview of how small energy systems can be monitored and controlled using affordable sensors and internet tools to ...

BP
Blazingprojects
Read more →
Electrical electroni. 3 min read

Smart Grid Fault Detection and Localization using Hybrid Fuzzy-Neural Network and Ph...

What This Project Is About This project explores how a smart electrical grid can automatically detect and locate faults using a combination of fuzzy logic (huma...

BP
Blazingprojects
Read more →
Electrical electroni. 3 min read

Smart LVDC Microgrid with Real-Time Energy Management and Batteryless Solar Inverter...

What This Project Is About This project explores a small-scale, low-voltage direct current (LVDC) microgrid that can manage energy in real time. It also investi...

BP
Blazingprojects
Read more →
Electrical electroni. 2 min read

Smart Grid Demand Response using IoT and Machine Learning for Energy Optimization...

What This Project Is About A practical study that looks at how a smart electrical grid can respond to changing electricity use in real-time. It combines Interne...

BP
Blazingprojects
Read more →
Electrical electroni. 2 min read

Smart Grid Fault Detection and Isolation Using IoT and Machine Learning...

What This Project Is About A plain-language overview of how smart grids, real-time monitoring, and learning algorithms work together to detect faults in electri...

BP
Blazingprojects
Read more →
Electrical electroni. 4 min read

Smart Grid Fault Detection and Isolation Using IoT-Enabled Phasor Measurement Units ...

What This Project Is About A plain-language overview of the topic and what the project investigates. The Problem It Addresses What problem or gap this project ...

BP
Blazingprojects
Read more →
WhatsApp Click here to chat with us