Radio frequency based wireless batch counting device for brewery

 

Table Of Contents


  • <p> </p><p><em>Page</em></p><p>Title Page</p><p>Certification</p><p>Abstract</p><p>Dedication</p><p>Acknowledgement</p><p><strong>

Chapter ONE

INTRODUCTION

  • </strong></p><p>Introduction &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 1</p><p>
  • 1.1&nbsp; General Description Of The Project &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;2</p><p>
  • 1.2&nbsp; Objectives Of The Study/Project &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;3</p><p>
  • 1.3&nbsp; Significance Of The Project &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;4</p><p>
  • 1.4&nbsp; Scope Of The Project &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;5</p><p>
  • 1.5&nbsp; Project Report Organization &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 6</p><p><strong>

Chapter TWO

LITERATURE REVIEW

  • </strong></p><p>
  • 2.0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Literature Review &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 7</p><p>
  • 2.1&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Historical Development Of The Project &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 7</p><p>
  • 2.2&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Applications Of The Project &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;9</p><p>
  • 2.3&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Theories And Models Relevant To The Design 10</p><p>2.
  • 3.1&nbsp; &nbsp; &nbsp; &nbsp;Electromagnetic Spectrum</p><p>(Range And Radio Wave) &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;10</p><p>
  • 2.4&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Radio Frequency Wave Band &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 15</p><p>
  • 2.6&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; The Seven-Segment Led Display &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;17</p><p>2.
  • 6.1&nbsp; &nbsp; &nbsp; &nbsp; Tuned Class C Amplifiers &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 19</p><p>2.
  • 6.2&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;Transistor Static Switch And</p><p>Electromagnetic Relay &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 21</p><p>
  • 2.7&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;Other System Component Description &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;26</p><p>2.
  • 7.1&nbsp; &nbsp; &nbsp; &nbsp;Resistor &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 26</p><p>2.
  • 7.3&nbsp; &nbsp; &nbsp; &nbsp;Capacitor &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 29</p><p>2.
  • 7.4&nbsp; &nbsp; &nbsp; &nbsp; Transformers &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;32</p><p>2.
  • 7.5&nbsp; &nbsp; &nbsp; &nbsp;Junction &nbsp;Diodes &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 34</p><p>2.
  • 7.6&nbsp; &nbsp; &nbsp; &nbsp;Voltage Regulator 78xx &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;36</p><p><strong>

Chapter THREE

SYSTEM DESIGN AND IMPLEMENTATION

  • </strong></p><p>
  • 3.0&nbsp; System Design And Analysis &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;39</p><p>
  • 3.1&nbsp; Description Of The System Building Blocks &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 39</p><p>
  • 3.2&nbsp; Block Diagram Development Into</p><p>Working Circuit &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 40</p><p>
  • 3.4&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; System Design Specifications &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;42</p><p>
  • 3.5&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Power Supply Unit &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 43</p><p>
  • 3.6&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Principle Of Operation Of The System &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;44</p><p>
  • 3.7&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; System Design Calculation &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;46</p><p>3.
  • 6.1&nbsp; &nbsp; &nbsp;Design of the filter capacitor &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 46</p><p>3.
  • 6.2&nbsp; &nbsp; &nbsp;Design Of The Laser Diode &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 48</p><p>3.
  • 6.3&nbsp; &nbsp; &nbsp;Design Of The Transistor static switches &nbsp;48</p><p><strong>

Chapter FOUR

SYSTEM TESTING AND EVALUATION

  • </strong></p><p>
  • 4.1&nbsp; Implementation &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 51</p><p>
  • 4.2&nbsp; Testing &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 52</p><p>
  • 4.3&nbsp; Result &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;52</p><p>
  • 4.4&nbsp; Project Packaging &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 53</p><p><strong>

Chapter FIVE

SUMMARY, CONCLUSION AND RECOMMENDATIONS

  • </strong></p><p>
  • 5.0&nbsp; Problems Encountered, Recommendation &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 55</p><p>And Conclusion</p><p>
  • 5.1&nbsp; Problem Encountered &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;55</p><p>
  • 5.2&nbsp; Recommendation &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 56</p><p>
  • 5.3&nbsp; Conclusion &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;57</p><p>References &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 58</p> <br><p></p>

Project Abstract

<p> This project work deals on the design and implementation of a Rf based wireless batch counting device for brewery capable of counting the bottled products in the conveyor and displaying the value numerically and wirelessly to its receiver installed about 100 meters away. &nbsp;This project is realized in two functional units the transmitter and receiver units. &nbsp;The transmitter unit is installed in the conveyor while the receiver unit is installed at a remote location. They interact by the principle of electrical resonance using Radio frequency transmission waveband. &nbsp;An Opto-coupler realized with Light dependent Resistor (LDR) and Laser diode form the sensor/electronic eye that detects the presence of bottle. &nbsp;The output signal of the sensor unit is processed and used to cause the Tuned Radio Frequency (TRF) transmitter module to radiate an Rf signal to its receiver, some meters away. &nbsp;On receiving the radiated signal, its output is processed and used to clock a 2-digit decimal counting unit that displays the number of counted bottles numerically. &nbsp;This system implies a lot in computer, and EEE. &nbsp;As a surveillance system, if the recorded value is not equal to the single unit version also installed in the front end of the conveyor, the workers involved will be fired. This system can only communicate to the receiver over a range of 100m maximum. &nbsp;At the end of every production cycle, if the recorded value on the stand alone type is less than the value recorded by this system, the workers get queried. &nbsp;The result being a system which can count the number of bottled drinks and relay the number/value wirelessly to a receiver some meters away. &nbsp;It is not microprogram control rather pure random logic. <br></p>

Project Overview

<p> </p><p><strong>1.1. &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; </strong><strong>Background of the Study</strong></p><p>Owing to the high rate of industrial espionage and theft, industrial security techniques need to be improved to arrest/combat pilfering in industries. &nbsp;This project work tries to bring in an improved security measure which can be used to check pilfering in Brewery industries. &nbsp;Pilfering of bottled drinks is a common theft in Breweries. &nbsp;And this act is perpetrated in the conveyor before a standalone counting device takes account of it. This has a tremendous effect on the stature of the fire – if it is not properly checked, could lead to liquidation and bankrupts of the firm.</p><p>Conventionally, there is a batch counting device that counts the bottled drinks and displays the values numerically at same spot carrier criminals who pilfer the products divert it before the counter. &nbsp;This chronology in social vices in the brewery industry has motivated me to embark on a project that is capable of counting/the bottled drinks in the capable of counting/the bottled drinks in the conveyor and display the value numerical and wirelessly (using Rf transmission waveband) to its receiver installed about 100m away. This device will count the product before it gets to the standalone version. &nbsp;This technique will help to check pilfering and bring industrial espionage to halt.</p><p><strong>1.2. &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; </strong><strong>Problem Statement</strong></p><p>Brewery industries all over world face the problem of pilfering of the products by the workers most frequently in the conveyer. This menace gave way to the development of a stand alone batch counting device which is usually installed in the conveyors to record the total number of bottled products. This techniques is facing serious threat since the bad-eggs pilfer/divert the products before it gets to the counter.</p><p>Owing to the challenges mentioned above, there is need to develop a system which will be installed at the entry point of the conveyors to count the products without the consent of the workers and display the value to a receivers unit &nbsp;installed in the manager office using Radio-frequency technology.</p><p><strong>1.3. &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; </strong><strong>Aims and Objectives</strong></p><p>The aim of this project is to design and implement a Radio frequency based wireless batch counter capable of counting bottled drinks/products and display it at a remote location.</p><p>1. &nbsp; &nbsp; &nbsp;To develop system which can communicate using Radio frequency technology.</p><p>2. &nbsp; &nbsp; &nbsp;To develop an opto coupler module which can detect opaque objects like bottle using laser diode and visible light</p><p>3. &nbsp; &nbsp; &nbsp;To develop a 2-digit decimal counting unit which can count from 00-99.</p><p>4. &nbsp; &nbsp; &nbsp; To develop a system which is pure hardwired. No micro-program.</p><p>5. &nbsp; &nbsp; &nbsp;To develop a &nbsp;power supply unit that can power Rf device.</p><p><strong>1.4. &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; </strong><strong>Significance of the Project</strong></p><p>This project work signifies a lot in telecom, computer and electronic engineering it is very useful in a number of domestic places like in bedroom and security lamps in the compound. &nbsp;A project of this type if modified can be used as a gate/door opening system, car immobilizer and for industrial process control. &nbsp;Another vital significance of this system is in the control of Air conditioner and refrigerators and other lamps in modern buildings. &nbsp;This system can be used to start and stop a power generating set from a distance.</p><p><strong>1.5. &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; </strong><strong>Scope of the Project</strong></p><p>This project work covers the following; Tuned Radio-frequency transmitter and receiver modules, Ne555 timer, Decimal counting unit, Decoders and transistors and electromagnetic relay. &nbsp;It also lays great emphasis on passive and active components used to implement the system. &nbsp;It also x-rays the mode of calculations of the basic parameters used in the design and other areas of application of the device. &nbsp;This report elaborates on the block diagram and principle of operation of the system.</p><p><strong>1.6. &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; </strong><strong>Limitations</strong></p><p>1. &nbsp; &nbsp; &nbsp;This project work is focused on the design and implementation of Rf batch counter for brewery.</p><p>2. &nbsp; &nbsp; &nbsp;It is a prototype of the real-life system due to the ratings of the components used to implement it.</p><p>3. &nbsp; &nbsp; &nbsp;It can only count products in an opaque bottle? (Filled or partially filled)</p><p>4. &nbsp; &nbsp; &nbsp;It uses only Radio frequency to communicate with the receiver</p><p>5. &nbsp; &nbsp; &nbsp;The system is powered using power from MAINS.</p><p>6. &nbsp; &nbsp; &nbsp;The receiver displays a maximum of 100 counts (00-99) and does not contain a memory device for storage of data.</p><p><strong>1.7. &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; </strong><strong>Project Report Organization</strong></p><p>This project report is presented in six chapters to appropriately illustrate the steps involved in its implementation. &nbsp;Chapter one introduce the design overview, objectives and significance of the project. &nbsp;Chapter two is basically the literature review and some theories relevant to the design. &nbsp;Chapter three is on the system design analysis while chapter four elaborates on the implementation, testing and result. &nbsp;Finally chapter five summarizes the entire thesis and recommendations.</p><p><strong>1.8. &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; </strong><strong>Definition of Terms:</strong></p> <br><p></p>

Blazingprojects Mobile App

📚 Over 50,000 Project Materials
📱 100% Offline: No internet needed
📝 Over 98 Departments
🔍 Software coding and Machine construction
🎓 Postgraduate/Undergraduate Research works
📥 Instant Whatsapp/Email Delivery

Blazingprojects App

Related Research

Computer Science. 4 min read

Smart Contactless Attendance System using Computer Vision and Edge AI...

What This Project Is About A practical project that explores how cameras and edge devices can automatically record attendance without touching anything. It uses...

BP
Blazingprojects
Read more →
Computer Science. 4 min read

Smart Traffic Management System using Edge AI and V2I Communication...

What This Project Is About The project studies how traffic flow can be improved by using smart devices at intersections and vehicles to make better decisions in...

BP
Blazingprojects
Read more →
Computer Science. 3 min read

Adaptive Lightweight Federated Learning for Resource-Constrained IoT Networks...

What This Project Is About A straightforward exploration of how to train machine learning models across many small devices (like sensors and gadgets) without se...

BP
Blazingprojects
Read more →
Computer Science. 3 min read

Smart Traffic Signal Optimization Using Reinforcement Learning for Urban Environment...

What This Project Is About A plain-language overview of how traffic signals can be made smarter by using simple learning rules that let signals adapt to real tr...

BP
Blazingprojects
Read more →
Computer Science. 2 min read

Smart Traffic Signal Control Using Reinforcement Learning and Connected Vehicle Data...

What This Project Is About A plain-language overview of using smart traffic signals that adapt in real time by learning from traffic patterns and information fr...

BP
Blazingprojects
Read more →
Computer Science. 4 min read

Smart Contract-based Resource Allocation and Fairness in Edge Computing Environments...

What This Project Is About A simple, beginner-friendly overview of how smart contracts can help manage computing tasks in networks of edge devices, with automat...

BP
Blazingprojects
Read more →
Computer Science. 2 min read

Smart Edge-Assisted Federated Learning for Real-Time Anomaly Detection in Industrial...

What This Project Is About A straightforward study of how edge devices (like sensors and local gateways) can work with collective learning to spot unusual behav...

BP
Blazingprojects
Read more →
Computer Science. 3 min read

Smart City Traffic Anomaly Detection Using Real-Time Multi-Modal Data Fusion and Exp...

What This Project Is About A simple, hands-on exploration of detecting unusual traffic patterns in a city using different data sources. The project investigates...

BP
Blazingprojects
Read more →
Computer Science. 4 min read

Smart Contract-Based Supply Chain Traceability System with Real-Time Anomaly Detecti...

What This Project Is About This project explores how smart contracts can track products through a supply chain, while using machine learning to spot unusual pat...

BP
Blazingprojects
Read more →
WhatsApp Click here to chat with us