INVESTIGATION TO ASCERTAIN THE CAUSES OF FAILURE AND PRESENT TRAFFIC CAPACITY OF HIGHWAYS

 

Table Of Contents


  • Title PageCertificationDedicationAcknowledgementAbstractTable Of ContentList Of TablesList Of FigureCHAPTER ONE1.0 INTRODUCTION1.1 Aims And Objective Of Study1.2 Scope Of The Project Study1.3 Background Information Of The Study Area1.4 Limitation Of The StudyCHAPTER TWO2.0 LITERATURE REVIEW2.1 General2.2 Engineering Properties Of Soil2.
  • 2.1Soil Properties As Highway Material2.
  • 2.2Highway Sub-Grade, Sub-Base, Their Thickness And Shaping2.
  • 2.3Material Classification2.2.
  • 3.1American Assoication Of State Highway And Transportation Officials (Aashto) System2.2.
  • 3.2Unified Soil Classification System (Uses)2.
  • 2.4Clay Soils And Their Engineering Properties2.
  • 2.5Soil Compaction And Consolidation Efficiencies2.
  • 2.6Soil Permeability And Compressibility2.
  • 2.7Ground Water Penetration And Its Effect On Road Bases2.
  • 2.8Effect Of Void In Highway Pavement2.3 Types Of Pavement Distress2.4 Traffic Survey2.
  • 4.1Interpretation Of Data2.5 Traffic Capacity Studies2.
  • 5.1Factors Affecting Practical Capacity2.
  • 5.2Traffic Flow Characteristic2.
  • 5.3Traffic Volume Study2.6 Relative Practical Terms2.
  • 6.1Site Exploration And Reconnaisance2.
  • 6.2Sourcing Of Samples2.
  • 6.3Measurement Of Pavement Thickness2.
  • 6.4Ground Water Inspection In The Location2.
  • 6.5Traffic Volume Study2.
  • 6.6Rainfall Data2.
  • 6.7Soil Tests Data2.
  • 6.8Soil Classification2.
  • 6.9The Californian Bearing Ratio (Cbr) Test Method2.7 Classification Relation Terms2.
  • 7.1Effective Size2.
  • 7.2Uniformity Coefficient2.
  • 7.3Co-Efficient Of Gradation2.
  • 7.4Liqid Limit2.
  • 7.5Plastic Limit2.
  • 7.6Plasticity Index2.
  • 7.7Liquidity Index2.
  • 7.8Consistency Limit2.
  • 7.9Group Index2.8 Aging Of Bitumen2.9 Bituminous Mixes And It DesignPrinciples2.
  • 9.1Diagnosis Of Unsatisfactory Mixes CasesCHAPTER THREE3.0 METHODOLOGY AND EXPERIMENTATION3.1 Field Collection Of A Soil Sample3.2 Colour Classification3.4 Specific Gravity Test3.5 Sieve Analysis3.6 Atterberg Limit Test3.
  • 6.1Plastic Limit3.
  • 6.2Liquid Limit3.7 Compaction Test3.
  • 7.1Standard Proctor Compaction Test3.
  • 7.2Modified Proctor Compaction Test3.8 California Bearing Ratio (C.B.R) Test3.9 Determination Of Water Table3.10 Manual Method Of Traffic Count3.11 Bull Specific Gravity Of Compactd Bituminous Mixtures Tests3.12 Extraction-Gradation TestCHAPTER FOUR4.0 DATA PRESENTATION AND ANALYSIS4.1 Field Collection Of Soil Sample4.2 Colour Classification4.3 Natural Moisture Content4.4 Specific Gravity Test4.5 Sieve Analysis4.6 Atterberg Limit Test4.7 Classification Computation And Data Analysis4.8 Compaction Test4.
  • 8.1Standard Proctor Compaction Test4.
  • 8.2Modified Proctor Compaction Test4.9 Determination Of Ground Water Table4.10 Manual Traffic Count Data And Analysis4.
  • 10.1Mean Daily Traffic4.11 Tests For Bulk Specific Gravity Of Compacted Bituminous Mixtures4.12 Extraction – Gradation TestCHAPTER FIVE5.0 SUMMARY, CONCLUSION AND RECOMMENDATION5.1 Conclusion And Summary5.
  • 1.1Summary5.
  • 1.2Conclusion5.2 RecommendationBibliographyAppendices

Project Abstract

The essence of this project work is to look into the causes of highway failure and the different types of failure which are presented along the Eliozu – New Airport road in Obio/Akpor L.G.A in River state, taken as a case study. Some factors identify as being responsible for the failure of the chosen road section includes, poor subgrade soil with questionable material. Ground water study is carried out, which give insight to it effect to the failure of the flexible pavement, lack of drainage facilities, improper pavement design, poor compaction and traffic volume increase and lack of maintenance are critically taken into consideration.Traffic volume count and soil test analysis and test on asphalt such as extraction-gradation test, are properly carryout, of which it result gives an adequate insight to the various causes of the failure situation experience along the road section through this investigation, show that relative to pavement, base course, wearing course and sub base were to less than the requirement for effective functionality of the said road of case study. From the investigation carryout, useful recommendation are made to improve the design and proper ways of reducing the rate of failure in Nigerian highways.

Project Overview

INTRODUCTIONIn construction of highway, generally the roads are not designed to last forever. It is been designed to serve some purpose for a specific time. As it can be seen in engineering work, the lifespan of a road is always an important factor that must be taken into consideration as one of the criteria for the construction. This really depends on the factors like construction procedure and consideration, the soil water relationship, quality of workmanship during the construction and the type of maintenance culture adopted.
Many roads (Highway mostly) are seen widely as attaining the state of failure and show signs of distress before the expected life span used for construction is reach, due to the lack of factors such as lack of maintenance culture etc. many of our road today serve as death trap and hang out for hoodlums going by the number of accident recorded daily on them as a result of bad paved road.Pavement failure can be defined as the failure of the constructed layer of durable material of specified thickness, usually of concrete, asphalt or bituminous materials assigned to carry wheeled vehicles. Due to the number of load passing through a pavement structure, some deflection of the surface and underlying layers occur. The deflection can be as a result of the excess load, poor material usage, and poor road foundation resulting from the nature of the soil or groundwater rise in the area of high groundwater level. If layers are lacking in strength, repeated applications causes roughening and cracking that ultimately lead to failure of the pavement structure.The construction of the Eliozu-New Airport road, which was constructed a while ago, sudden failure due to improper investigation of either the soil composition or traffic capacity situation in the said section of the road networking, lack of proper drainage to control the effect of rise in groundwater level. The pavement thickness of the road section as measure was about 3.87inches (98.3mm) and the width of the dual carriageway about 7.9m with no proper shoulder and drainage provided.The effort of put in controlling the rate of failure and provision for annual increase of traffic capacity has been a thing of burden to the government of the River State in particular and the Federal government in general. By questioning and observation, failure of the said Eliozu-New Airport road as it problem from compounded presence of water coming out at a particular points on the road surface poor material and workmanship and pressure from increasing traffic capacities on the road pavement of which the government is making provision for overhead bridge which is currently in construction and it is found out that most at a point like Eliozu junction by ABC shuttle, the pavement bituminous material on the road have disappear.1.1 AIMS AND OBJECTIVE OF STUDYThe major objective of this investigation is to ascertain factors that likely lead to the failure of Eliozu-New Airport road in Obio/Akpor L.G.A. of River State in particular and Nigeria Highways in general and how it affect national stability and development. This project work stand at a point to unveil the very facts behind why most of the roads fail soon after construction.The count carryout will broadly provide information on the actual traffic volume and the capacity of traffic and will help in used for possible traffic planning and design.It shall lead in proper construction of highway and remedy that will possible give a lasting solution and reduction in road failures. The several test such as test on asphalt, test on soil will provided better facts to the cause of the failure of the case study.1.2 SCOPE OF THE PROJECT STUDYThe whole section of the road was visited (Reconnaissance) and failure pattern noted.
The project scope includes:
– Assessment of kind of failure and causes on the Eliozu-New Airport road.
– Soil samples collection and testing and analysis to determine the sub-grade, sub-base strength of the road foundation.
– Assessment of underground water level and its affect on the pavement.
– Assessment of traffic capacity intensity on the networking plan of the road and volume determination.
– Assessment of drainage condition and proper drainage provision.
– Assessment of the proportion and amount of bitumen and finer used in the Asphalt mixture used for the surface course.
– Classification of the soil according to ASSHATO classification system.
– Enumeration of possible pavement distresses that are found along a road section.1.3 BACKGROUND INFORMATION OF THE STUDY AREAThe location of which this investigation is been carryout is a road network located at Obio/Akpor L.G.A at the out script of Port-Harcourt, River State. The road is from Eliozu junction to Airport road leading to Elele of which concentration is lay on the Eliozu junction where ABC shuttle is, at where over head bridge is undergoing construction currently to where the Eliozu-New airport road intersect with the airport road.1.4 LIMITATION OF THE STUDYThis research was carried out under the limits of the available material and resources. The work is centre on soil sample testing and classification, asphalt testing and traffic volume and effect of groundwater on road bases.
The following factors hinder the prompt attainment of this project work.
– Lack of laboratory facilities
– Cost of the project work
– Time proximities.

Blazingprojects Mobile App

📚 Over 50,000 Project Materials
📱 100% Offline: No internet needed
📝 Over 98 Departments
🔍 Software coding and Machine construction
🎓 Postgraduate/Undergraduate Research works
📥 Instant Whatsapp/Email Delivery

Blazingprojects App

Related Research

Civil engineering. 3 min read

Design and Analysis of Sustainable Solar-Powered Pavement Technologies...

This project is about creating and studying new ways to use solar power with the road surfaces we see every day, like pavements and driveways. The idea is to de...

BP
Blazingprojects
Read more →
Civil engineering. 3 min read

Design and Optimization of Sustainable Stormwater Management Systems for Urban Flood...

This project focuses on creating better ways to handle rainwater in cities so that flood problems are reduced and the environment stays healthy. When it rains h...

BP
Blazingprojects
Read more →
Civil engineering. 2 min read

Sustainable Post-Disaster Temporary Shelter Design and Implementation...

This project is about designing and creating temporary shelters for people affected by disasters like earthquakes, floods, or fires, in a way that is environmen...

BP
Blazingprojects
Read more →
Civil engineering. 3 min read

Design and Analysis of Sustainable Urban Stormwater Management Systems...

This project is about designing and studying ways to better manage the rainwater that falls on cities, often called stormwater. When it rains heavily, too much ...

BP
Blazingprojects
Read more →
Civil engineering. 2 min read

Design and Analysis of a Sustainable High-rise Building Using Green Construction Tec...

The project topic "Design and Analysis of a Sustainable High-rise Building Using Green Construction Techniques" focuses on the innovative approach of ...

BP
Blazingprojects
Read more →
Civil engineering. 3 min read

Analysis and Design of Sustainable Green Building Structures using Bamboo as a Prima...

The project on "Analysis and Design of Sustainable Green Building Structures using Bamboo as a Primary Material" aims to explore the feasibility and b...

BP
Blazingprojects
Read more →
Civil engineering. 3 min read

Analysis and design of a sustainable stormwater management system for urban areas....

The project topic, "Analysis and design of a sustainable stormwater management system for urban areas," addresses the critical need for effective stor...

BP
Blazingprojects
Read more →
Civil engineering. 2 min read

Optimization of Reinforced Concrete Bridge Design for Enhanced Durability...

The project topic "Optimization of Reinforced Concrete Bridge Design for Enhanced Durability" focuses on improving the longevity and resilience of rei...

BP
Blazingprojects
Read more →
Civil engineering. 3 min read

Optimization of Reinforced Concrete Structures Using Advanced Computational Tools...

The project on "Optimization of Reinforced Concrete Structures Using Advanced Computational Tools" aims to enhance the design and analysis process of ...

BP
Blazingprojects
Read more →
WhatsApp Click here to chat with us