Preparation of soap using different types of oils and exploring it’s properties

 

Table Of Contents


  • <p> </p><p>

Chapter ONE

INTRODUCTION

  • </p><p>Introduction</p><p>

Chapter TWO

LITERATURE REVIEW

  • </p><p>Literature Review</p><p>2.1</p><p>Semi Boiled Process</p><p>2.2</p><p>Full Boiled</p><p>2.3</p><p>Cold Process</p><p>2.4</p><p>Different types of soap making oils</p><p>2.5</p><p>Castor Oil</p><p>2.6</p><p>Olive Oil</p><p>2.7</p><p>Neem Oil</p><p>3.1</p><p>Coconut Oil</p><p>

Chapter THREE

RESEARCH METHODOLOGY

  • </p><p>Materials and Methods</p><p>3.1</p><p>Materials Required</p><p>3.2</p><p>Methodology</p><p>3.2.1</p><p>Preparation of Soap</p><p>3.2.2</p><p>Comparing different</p><p>properties of soap with detergent</p><p>3.2.3</p><p>Blending of Oils</p><p>3.2.4</p><p>Calculation of TFM</p><p>3.2.5</p><p>Calculation of free alkali</p><p>3.2.6</p><p>Analysis of the best blend</p><p>3.2.7</p><p>Saponification Value</p><p>3.2.8</p><p>Iodine Value</p><p>3.2.9</p><p>Unsaponifiable Matter</p><p>3.2.10</p><p>Acid Value</p><p>

Chapter FOUR

DATA PRESENTATION AND ANALYSIS

  • </p><p>Results and Discussion</p><p>4.1</p><p>Comparison of soap and detergent</p><p>4.2</p><p>Properties of soap after blending of oils</p><p>4.3</p><p>TFM values of soaps</p><p>4.4</p><p>Analysis of the best blend</p><p>4.5</p><p>Saponification Values</p><p>4.5</p><p>Iodine Values</p><p>4.6</p><p>Unsaponifiable Matter</p><p>4.7</p><p>Acid Value</p><p>

Chapter FIVE

SUMMARY, CONCLUSION AND RECOMMENDATIONS

  • </p><p>Conclusion</p><p>Chapter 6</p><p>References</p><p><strong>List of Tables</strong></p><p>Sl.no.</p><p>Name of the table</p><p>Page</p><p>no.</p><p>1</p><p>Composition of coconut oil</p><p>13</p><p>2</p><p>Yield of soap using individual oils</p><p>23</p><p>3</p><p>Properties of soap versus detergent</p><p>23</p><p>4</p><p>Moisture and Hardness of soap samples from</p><p>24</p><p>individual oils</p><p>5</p><p>Yield and pH values of soap samples from blending of</p><p>24</p><p>oils</p><p>6</p><p>Lathering and cleansing power of soap samples from</p><p>25</p><p>blending of oils</p><p>7</p><p>Moisture and Hardness of soap samples from blending</p><p>26</p><p>of oils</p><p>8</p><p>Total fatty matter of best blends of oils</p><p>27</p><p>9</p><p>Saponification value of the oil blend</p><p>28</p><p>10</p><p>Iodine value of the oil blend</p><p>28</p><p>11</p><p>Unsaponifiable matter</p><p>29</p><p>12</p><p>Acid Value of the oil blend</p><p>30</p> <br><p></p>

Project Abstract

<p> Soaps are the sodium salts or potassium salts of stearic acids or any other fatty acids. They are prepared by the saponification process, which is, reacting the oil which contain triglycerides with caustic soda (NaOH) to give the soap. However different oils have different composition of fatty acids which are responsible for different properties of soaps made out of them. In the present work 5 different types of oils are taken. They are blended in various ratios to prepare 14 different samples of soap. Different properties of these samples were analyzed to see which soap is the best one. The cleansing and lathering properties of all samples were compared. The blend of coconut oil and castor oil at 31 ratio is found out to be the best with 76.8% of TFM and 89.46% of yield. The best blend is analyzed for various properties and they were compared with that given in the literature. The saponification values, iodine values of coconut oil and castor oil were found out and these values were also found for the blend. It was found that the blend was having SAP value of 230.4 and iodine value of 40 which are higher than the individual values. Thus soap prepared using blend of both these oils has better properties than the soaps prepared by individual oils. <br></p>

Project Overview

Blazingprojects Mobile App

📚 Over 50,000 Project Materials
📱 100% Offline: No internet needed
📝 Over 98 Departments
🔍 Software coding and Machine construction
🎓 Postgraduate/Undergraduate Research works
📥 Instant Whatsapp/Email Delivery

Blazingprojects App

Related Research

Chemistry. 3 min read

Synthesis and Characterization of Bio-based Metal-Organic Frameworks for Solar-Drive...

What This Project Is About The project looks at designing and testing bio-based metal-organic frameworks (MOFs) to break down pollutants in water using sunlight...

BP
Blazingprojects
Read more →
Chemistry. 2 min read

Development of bio-based adhesives from lignin-derived phenolic monomers for sustain...

What This Project Is About A straightforward study of making adhesives from natural lignin-based chemicals to bond and strengthen polymer materials used in prod...

BP
Blazingprojects
Read more →
Chemistry. 3 min read

Synthesis and Characterization of Biodegradable Polymers via Green Chemistry Approac...

What This Project Is About A plain-language overview of how biodegradable polymers can be made using environmentally friendly chemistry and tested for use in me...

BP
Blazingprojects
Read more →
Chemistry. 4 min read

Development of magnetic nanoparticle-supported photocatalysts for tandem dye degrada...

What This Project Is About A straightforward study of catalytic materials that use magnetic nanoparticles to speed up chemical reactions under visible light. Th...

BP
Blazingprojects
Read more →
Chemistry. 2 min read

Synthesis and Characterization of Biodegradable Polymers from Renewable Resources fo...

What This Project Is About A straightforward exploration of creating and testing environmentally friendly plastics that break down safely in the body or environ...

BP
Blazingprojects
Read more →
Chemistry. 3 min read

Novel synthesis and characterization of metal–organic frameworks (MOFs) for high-d...

What This Project Is About A straightforward, beginner-friendly overview of studying a class of materials called metal–organic frameworks (MOFs) and how they ...

BP
Blazingprojects
Read more →
Chemistry. 2 min read

Synthesis and characterization of bio-inspired metal–organic frameworks for select...

What This Project Is About This project explores creating and studying bio-inspired metal–organic frameworks (MOFs). MOFs are like sponge-like crystals built ...

BP
Blazingprojects
Read more →
Chemistry. 4 min read

Synthesis, characterization, and catalytic application of metal-organic framework-ba...

What This Project Is About This project explores how tiny, carefully designed materials called metal-organic frameworks (MOFs) can help break down pharmaceutica...

BP
Blazingprojects
Read more →
Chemistry. 2 min read

Synthesis, characterization, and catalytic performance of transition metal–organic...

What This Project Is About This project explores how special materials called metal–organic frameworks (MOFs) can be used at the tiny scale to convert carbon ...

BP
Blazingprojects
Read more →
WhatsApp Click here to chat with us