Optimization of activated carbon preparation from corncob wastewater treatment Optimization of activated carbon preparation from corncob wastewater treatment

 

Table Of Contents


  • No response received.

Project Abstract

<p> Corncob Activated Carbon (AC) was produced via chemical activation with phosphoric acid (H3PO4) for the hydrolysis step and potassium hydroxide (KOH) for the impregnation step. In this work, optimization and development of the model equations for the preparation conditions of AC, Design Expert 6.0.6 Stat-Ease, Inc USA software was used. For the optimization of the AC preparation conditions, a Central Composite Design (CCD) was used to investigate the effect of independent variables on the yield and adsorption capacity of the activated carbon samples. The independent variables used in this work were, phosphoric acid concentration, potassium hydroxide concentration, activation temperature (oC) and activation time (minute). Response Surface Methodology (RSM) technique was used to optimize the preparation conditions (H3PO4, KOH, temperature and time); with percentage yields of hydrolysate and activated carbon and adsorption capacity of AC as the targeted responses. The optimal conditions for the preparation of AC using CCD software were 358.15 oC, 116.90 minutes, 0.29 mg/l H3PO4, 0.09 mg/l KOH. This set of conditions gave hydrolysate yield of 76.9339 %, while activated carbon yield and Methylene Blue (MB) adsorption capacity were 21.84 % and 1.98 mg/g respectively. The specific surface area of the AC using Sear’s method was 314.2 m2/g. Analysis of Variance (ANOVA) for hydrolysate yield, AC yield and adsorption capacity showed the developed models equations were significant. The experimental and predicted values of the hydrolysate yield, AC yield and adsorption capacity of adsorbent on adsorbate MB were in close agreement and the correlation coefficients R2-values of 0.9688, 0.9358 and 0.9134. The surface areas of selected ACs were 259.8 m2/g (AC8), 215 m2/g (AC9) and 314.2 m2/g (AC14) gave adsorption capacities of 1.92 gm/g, 1.97 mg/g and 1.98 mg/g of MBrespectively. The Fourier Transform Infra-Red (FTIR) analysis of the AC samples produced showed the presence of O-H, C-H, C-Br, N-H, C-C, C-N, C=C and C≡C functional groups which aid in adsorbing adsorbate onto the adsorbent. Adsorption isotherm data were used to model the following Langmuir and Freundlich isotherms; the adsorption of Chromium ions on the selected AC produced was predicted by Langmuir and Freundlich isotherm models with R2 value of 0.9974 and 0.7691 respectively. The percentage chromium removal increases with increase in adsorbent dosage. The activated carbon samples produced can be effectively used for wastewater treatment. <br></p>

Project Overview

<p> </p><p><strong>INTRODUCTION</strong></p><p><strong>1.1 &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</strong><strong>Background of Study</strong></p><p>Activated Carbon (AC) is a versatile derivative of biomass predominantly amorphous (crystalline) solid that has extra ordinary large internal surface area and pore volume (Jamaludin, 2010). The unique structure of AC gives rise to its application ranges from liquid to gas phase because of their adsorptive properties.</p><p>Industrial ACs can be produced from any cheap material with a high carbon content, low inorganics as precursors such as coal, wood, coconut shell, corn cob, almond shells, peach stones, grape seeds, apricot stones, cherry stones, olive stones, peanut hull, nut shells, rice husk, oil palm shells, sugar cane bagasse (Tsai <em>et al</em>., 1997, and 2001; Jamaludin, 2010;</p><p>Diya’udeen <em>et al</em>., 2011). Palm shell, rattan, mango stem peel, and corn cob (Mohd <em>et al</em>., 2011); canarium schevein furthii nutshell (and Ajayi and Olawale, 2009), groundnut shells, Palm Kernel shells, coconut shells, bamboo, wood chips, corn cob, seeds and saw dusts (Oloworise, 2006).</p><p>AC has been the most popular and widely used adsorbent in liquid and gas treatment throughout the world. Charcoal been the pioneer of AC has been recognized as the oldest adsorbent known in waste water treatment.</p><p>AC is produced by a process consisting of raw material dehydration and carbonization followed by activation.</p> <br><p></p>

Blazingprojects Mobile App

📚 Over 50,000 Project Materials
📱 100% Offline: No internet needed
📝 Over 98 Departments
🔍 Software coding and Machine construction
🎓 Postgraduate/Undergraduate Research works
📥 Instant Whatsapp/Email Delivery

Blazingprojects App

Related Research

Chemistry. 4 min read

Synthesis and Characterization of Bio-based Metal-Organic Frameworks for Solar-Drive...

What This Project Is About The project looks at designing and testing bio-based metal-organic frameworks (MOFs) to break down pollutants in water using sunlight...

BP
Blazingprojects
Read more →
Chemistry. 4 min read

Development of bio-based adhesives from lignin-derived phenolic monomers for sustain...

What This Project Is About A straightforward study of making adhesives from natural lignin-based chemicals to bond and strengthen polymer materials used in prod...

BP
Blazingprojects
Read more →
Chemistry. 4 min read

Synthesis and Characterization of Biodegradable Polymers via Green Chemistry Approac...

What This Project Is About A plain-language overview of how biodegradable polymers can be made using environmentally friendly chemistry and tested for use in me...

BP
Blazingprojects
Read more →
Chemistry. 4 min read

Development of magnetic nanoparticle-supported photocatalysts for tandem dye degrada...

What This Project Is About A straightforward study of catalytic materials that use magnetic nanoparticles to speed up chemical reactions under visible light. Th...

BP
Blazingprojects
Read more →
Chemistry. 4 min read

Synthesis and Characterization of Biodegradable Polymers from Renewable Resources fo...

What This Project Is About A straightforward exploration of creating and testing environmentally friendly plastics that break down safely in the body or environ...

BP
Blazingprojects
Read more →
Chemistry. 4 min read

Novel synthesis and characterization of metal–organic frameworks (MOFs) for high-d...

What This Project Is About A straightforward, beginner-friendly overview of studying a class of materials called metal–organic frameworks (MOFs) and how they ...

BP
Blazingprojects
Read more →
Chemistry. 4 min read

Synthesis and characterization of bio-inspired metal–organic frameworks for select...

What This Project Is About This project explores creating and studying bio-inspired metal–organic frameworks (MOFs). MOFs are like sponge-like crystals built ...

BP
Blazingprojects
Read more →
Chemistry. 4 min read

Synthesis, characterization, and catalytic application of metal-organic framework-ba...

What This Project Is About This project explores how tiny, carefully designed materials called metal-organic frameworks (MOFs) can help break down pharmaceutica...

BP
Blazingprojects
Read more →
Chemistry. 2 min read

Synthesis, characterization, and catalytic performance of transition metal–organic...

What This Project Is About This project explores how special materials called metal–organic frameworks (MOFs) can be used at the tiny scale to convert carbon ...

BP
Blazingprojects
Read more →
WhatsApp Click here to chat with us