Production Of Cassava Of Starch From Cassava

 

Table Of Contents


  • Title PageAbstractTable Of ContentChapter One1.0 Introduction1.1 Scope And ObjectiveChapter Two2.1 History Of Cassava2.2 Environmental Condition For Cassava Growth2.3 Cultural Method Of Cultivation/Harvesting2.4 Harvesting/Storage2.5 Nutritive Composition Of Cassava2.6 Method Of Cassava Processing2.7 Toxicity Of Cassava Processing And It’s Material2.8 Starch Chemistry2.9 Physical Properties Of Starch2.
  • 9.1Chemical Properties Of Starch2.
  • 9.2Starch Processing2.
  • 9.3Hydrolysis Of Local StarchChapter Three3.0 Production Of Starch From Cassava (Textile Starch)
  • 3.1Production Of Starch From Cassava (Edible Starch)
  • 3.2Drying Process3.
  • 2.1Determination Of Ash Content3.
  • 2.2Determination Of Moisture Content Of Fresh Cassava, Textile And Edible Starch 3.
  • 2.3Determination Of Cyanide Content Of Fresh Crushed Cassava Textile And Edible Starch3.
  • 3.4Preparation Of 5% Of Na0h Solution3.3.
  • 4.1Titration Experiment With Agn03 (Silver Nitrate)Chapter Four4.0 Result And Discussion4.1 Table Ash Content4.
  • 2.1Determination Of Moisture Content Sample A4.
  • 2.2Sample B (Textile Starch)4.
  • 2.3Sample C Edible Starch4.
  • 3.1Determination Of Cyanide Content Sample A4.
  • 3.2Edible Starch (Sample B)4.
  • 3.3Textile Starch (Sample C)Chapter Five5.0 Conclusion And Recommendations5.1 Conclusion5.2 Recommendation Appendix AAppendix BAppendix CAppendix DReferences

Project Abstract

The fresh cassava were sources from Idodo in Nkanu Local Government of Enugu state. The weight of the cassava tuber were taken to be 31.50kg. After peeling and washing, it was divided into two equal parts which was 21.13kg for production of sample A and sample B respectively (edible and textile starch) which weighed 13.1kg.During this process, the temperature were obtained at 700c (617.4R). And the other properties of the cassava samples were carried out, such as moisture content of the fresh cassava 59.82% (Sample A), Textile starch 52.02% (Sample B) and edible starch (Sample C). the average mean percent of ash content of Sample A, edible starch was 2.6% while that of (Sample B, fresh crush cassava was 2.1%.Also determination of cyanide content of fresh cassava 14.13ml. Textile 5.0ml and edible starch 4.48ml.

Project Overview

1.0 INTRODUCTION
Cassava was known to the world before the discovery of America. The Portuguese settlers found the native Indian’s in Brazil growing the cassava plant and Pierre Marty wrote in 1490 that the poisonous roots of a “Yucca” were used in the preparation of bread. Cassava were introduced to the Westerner const of Africa in the sixteenth centuries while the word topioca derived from tapioca. The tipi Indian’s name the liquid which is extracted from the tubers and made into pellets called tipicoet. The edible tubers, which serves as food in many tropical countries as well as source of starch, it also serves as principal food for workers in minning and industrial centers in most countries too.
Cassava is a single species, manihot esculent crante (synonymous with mainhot utilissmapolhe) it is a tuberous dicotyledous plant, belonging to the botanical family of Euphorbiacca, and like most other members of that family. The cassava plant contain latifiers and produces latex. The cassava tuber contains and mainly water and carbohydrate with waters having a greater proportion and a small significant amount of cyanogenic glucoside (prussic acid) of all the constituents of cassava tubers. Two major factors limits its utilization. In the form of the fresh (unprocessed) tuber. The first is that the unprocessed tuber has relatively high amount of prussic acid, which is highly poisonous to human and animal when consumed. The second factor is that fresh cassava tubers cannot be stored more than a few days after harvest. The tuber begins to deteriorate rapidly as a result of enzymatic process in the presence of water contained in the tuber.
It is an important food crop in tropical countries such as Brazil, Nigeria, Indonesia and Thailand. The roots of the cassava are rich in starch and are consumed as human food or animal feed. Small amount of it’s root are converted into industrial products. Today Thailand are the world leaders of starch production from cassava.
TABLE 1
BELOW IS RECENT WORLD PRODUCTION OF CASSAVA NOT IN THE YEAR 2001.
Country Volume (million)
Nigeria 33,854,000
Brazil 24,481,356
Thailand 18,283,000
Congo 15,959,000
Indonesia 15,800.00
Ghana 7,845,440
Tanzania 5,757,968
India 5,800,00
Mozambique 5,361,974
China 3,700,900
Others 175,617,389
SOURCE: FAD STA, 2001SCOPE AND OBJECTIVE
The objective of this project is based on the production of starch from cassava, using a manual instrument called greater to open all the tuber cell. So that the starch granules are easily released and extracted through hydraulic press, or sieve (mesh). However it has been observed that cassava flour produced through different process have different qualities.SCOPE
The following analysis were carried out cyanide content, production of Edible and textile starch, Ash content of edible and fresh crushed cassava, moisture content of fresh crushed cassava, textile starch and edible starch. At the end of the work, the result of these analysis were shown.

Blazingprojects Mobile App

📚 Over 50,000 Project Materials
📱 100% Offline: No internet needed
📝 Over 98 Departments
🔍 Software coding and Machine construction
🎓 Postgraduate/Undergraduate Research works
📥 Instant Whatsapp/Email Delivery

Blazingprojects App

Related Research

Chemical engineering. 2 min read

Optimization of biodiesel production via microwave-assisted transesterification usin...

What This Project Is About A straightforward study of producing biodiesel, a renewable fuel, using a simple chemical process guided by microwaves. The project e...

BP
Blazingprojects
Read more →
Chemical engineering. 2 min read

Hydrogen storage materials optimization using metal-organic frameworks for scalable ...

What This Project Is About A straightforward exploration of how metal-organic frameworks (MOFs) can store hydrogen more efficiently for use in on-site fuel cell...

BP
Blazingprojects
Read more →
Chemical engineering. 2 min read

Optimization of catalytic pyrolysis of plastic waste into value-added fuels and chem...

What This Project Is About A practical study on turning plastic waste into useful fuels and chemicals by using a catalytic process that speeds up reactions, com...

BP
Blazingprojects
Read more →
Chemical engineering. 3 min read

Optimizing Microbial Electrochemical Systems (MES) for Sustainable Wastewater Treatm...

What This Project Is About A final-year project that explores how to treat wastewater while producing useful energy. It looks at a technology called a microbial...

BP
Blazingprojects
Read more →
Chemical engineering. 4 min read

Modeling and Optimization of Bioreactor Performance for Sustainable Biofuel Producti...

What This Project Is About This project explores how bioreactors can be run more efficiently to produce biofuels. It combines computer simulations of fluid flow...

BP
Blazingprojects
Read more →
Chemical engineering. 2 min read

Nanomaterial-assisted CO2 capture using solid sorbents for post-combustion flue gas ...

What This Project Is About This project explores using tiny, engineered materials (nanomaterials) attached to solid substances to capture carbon dioxide from fl...

BP
Blazingprojects
Read more →
Chemical engineering. 2 min read

Development of a Waste-to-Energy Process Using Microbial Electrochemical Cells for M...

What This Project Is About A plain-language overview of the topic and what the project investigates. The Problem It Addresses What problem or gap this project...

BP
Blazingprojects
Read more →
Chemical engineering. 4 min read

Design and optimization of a biochar-based hybrid adsorption–electrochemical capac...

What This Project Is About A simple, practical exploration of using a charcoal-like material called biochar inside a device that combines adsorption (pulling dy...

BP
Blazingprojects
Read more →
Chemical engineering. 3 min read

Solar-driven Photoelectrochemical Water Splitting for On-site Hydrogen Production Us...

What This Project Is About This project explores a way to split water into hydrogen and oxygen using sunlight, with a special setup that combines two types of l...

BP
Blazingprojects
Read more →
WhatsApp Click here to chat with us