Production Of A High Quality Bar Soap And Compare With Detergent

 

Table Of Contents


  • Title PageLetter Of TransmittalApproval PageDedicationAcknowledgementAbstractChapter One1.0 IntroductionChapter Two2.0 Literature ReviewChapter Three3.0 Experimental ProcedureChapter Four4.0 Experimental CalculationChapter Five5.0 Experimental Results And AnalysisChapter Six6.0 DiscussionChapter Seven7.0 Conclusion7.1 RecommendationReferencesAppendix.

Project Abstract

The sole aim of this research work is to produce a high quality of bar soaps and compare with detergent. The major aspects of this projects deals with quality control processes in the production of a high quality bar soaps.In soap production, cold process was used and this was found out to be the most effective means of production considering several factors. In the production of bar soaps, palm kernel oil was used instead of fallow or grease. This is because palm kernel has a low titre value and gives a quicker lather and the fallow or grease gives a high titre value which produce soap that is slow to dissolve at low temperature. Different formulation were made and it was found out that the best ratio for a high quality soap is 21 of palm kernel to caustic soda respectively. Carrying out test on soap produced were saponification value of P.K.O to be 248.24 refractive index 1.45, free fatty acid value of 1.56, acid value of 3.5, moisture content of soap 35.29%, percentage free alkaline 0.4% alcohol insoluble matter of 1.43% and PH value of 8.80 at a temperature reading of 30.00.The synthetic detergent which was developed to replace the soapy detergent has a better quality. It was prepared by a sulphonation reaction when this reaction is carried out, a detergent paste is formed which when builders and other additives were added, it then form detergent which was size reduced and seized.The sieved detergent was dried by solar energy. From the project, it was discovered that (STPP) helps the detergent to reduce water hardness sequestering calcium ion and heavy metal ion water, could increase the cleaning action of detergent. And also the hydrogen peroxide acts as stain removal due to its bleaching action, the CMC acts as anti-redeposition agent.The high quality bar soap was found to contain certain materials which limit the formation of scum in hard water and this ascertained that the synthetic detergent is not more effective than bar soap when washing and moreover bar soap does not change the colour of a material when washing but detergent does by bleaching the colour.

Project Overview

INTRODUCTION
Soap is a class of products that serves for leaning of human property and surrounding. Hence foam in its various foams is in high demand in all society. It is a cleansing agent described chemically as an alkaline metal salt of a long carbon- chain monocarboxylic acid, represented for example by sodium myristate (NaCooC13H27) is shown below:H3C CH2 CH2 CH2 CH2 CH2 CH2
CH2 CH2 CH2 CH2 CH2 CH2
The hydrocarbon portion is hydrophobic and carboxylate portion is hydrophic.
For detergency process, the most useful hydrophobic portion contains 12 – 18 carbon atoms. Sodium soaps are not useful for soil removal with hydrocarbon chains of less than 12 carbons. When the chain length exceeds 18 carbons, they become insoluble in water.
Soaps and detergent belong to the general class of substances known as surface agents or surfactants. These are substances which when dissolved in a solvent even at very low concentration have the property of lowering the surface energy and hence altering the surface behaviour of the solvent to an extreme degree.
In general, the surface active agents are composed of fairly large molecules which contain separated groups of dissimilar nature, one group being of a hydrophilic or water – attracting, character while the other group has a hydrophobic or oil attracting character and also it exhibited in aqueous or non aqueous system.
In this work, high quality industrial soap can be produced using sodium hydroxide and palm kernel oil. Ordinary soap today is simply a mixture of sodium salts of long chain fatty acids. Fatty acids are the basic raw materials for soap and most of the inorganic materials for soap and most of the inorganic material such as Oleum, caustic soda and various sodium phosphate and a large number of additives, the last mentioned amount is 4% or less of the total products weight are purchased.
The overall objective of this research project is geared towards the production of high quality bar soap compare with detergent.

Blazingprojects Mobile App

📚 Over 50,000 Project Materials
📱 100% Offline: No internet needed
📝 Over 98 Departments
🔍 Software coding and Machine construction
🎓 Postgraduate/Undergraduate Research works
📥 Instant Whatsapp/Email Delivery

Blazingprojects App

Related Research

Chemical engineering. 2 min read

Optimization of biodiesel production via microwave-assisted transesterification usin...

What This Project Is About A straightforward study of producing biodiesel, a renewable fuel, using a simple chemical process guided by microwaves. The project e...

BP
Blazingprojects
Read more →
Chemical engineering. 4 min read

Hydrogen storage materials optimization using metal-organic frameworks for scalable ...

What This Project Is About A straightforward exploration of how metal-organic frameworks (MOFs) can store hydrogen more efficiently for use in on-site fuel cell...

BP
Blazingprojects
Read more →
Chemical engineering. 2 min read

Optimization of catalytic pyrolysis of plastic waste into value-added fuels and chem...

What This Project Is About A practical study on turning plastic waste into useful fuels and chemicals by using a catalytic process that speeds up reactions, com...

BP
Blazingprojects
Read more →
Chemical engineering. 2 min read

Optimizing Microbial Electrochemical Systems (MES) for Sustainable Wastewater Treatm...

What This Project Is About A final-year project that explores how to treat wastewater while producing useful energy. It looks at a technology called a microbial...

BP
Blazingprojects
Read more →
Chemical engineering. 4 min read

Modeling and Optimization of Bioreactor Performance for Sustainable Biofuel Producti...

What This Project Is About This project explores how bioreactors can be run more efficiently to produce biofuels. It combines computer simulations of fluid flow...

BP
Blazingprojects
Read more →
Chemical engineering. 2 min read

Nanomaterial-assisted CO2 capture using solid sorbents for post-combustion flue gas ...

What This Project Is About This project explores using tiny, engineered materials (nanomaterials) attached to solid substances to capture carbon dioxide from fl...

BP
Blazingprojects
Read more →
Chemical engineering. 3 min read

Development of a Waste-to-Energy Process Using Microbial Electrochemical Cells for M...

What This Project Is About A plain-language overview of the topic and what the project investigates. The Problem It Addresses What problem or gap this project...

BP
Blazingprojects
Read more →
Chemical engineering. 4 min read

Design and optimization of a biochar-based hybrid adsorption–electrochemical capac...

What This Project Is About A simple, practical exploration of using a charcoal-like material called biochar inside a device that combines adsorption (pulling dy...

BP
Blazingprojects
Read more →
Chemical engineering. 2 min read

Solar-driven Photoelectrochemical Water Splitting for On-site Hydrogen Production Us...

What This Project Is About This project explores a way to split water into hydrogen and oxygen using sunlight, with a special setup that combines two types of l...

BP
Blazingprojects
Read more →
WhatsApp Click here to chat with us