Preparation of soap using different types of oils and exploring it’s properties

 

Table Of Contents


  • <p> </p><p>

Chapter ONE

INTRODUCTION

  • </p><p>Introduction</p><p>

Chapter TWO

LITERATURE REVIEW

  • </p><p>Literature Review</p><p>2.1</p><p>Semi Boiled Process</p><p>2.2</p><p>Full Boiled</p><p>2.3</p><p>Cold Process</p><p>2.4</p><p>Different types of soap making oils</p><p>2.5</p><p>Castor Oil</p><p>2.6</p><p>Olive Oil</p><p>2.7</p><p>Neem Oil</p><p>3.1</p><p>Coconut Oil</p><p>

Chapter THREE

SYSTEM DESIGN AND IMPLEMENTATION

  • </p><p>Materials and Methods</p><p>3.1</p><p>Materials Required</p><p>3.2</p><p>Methodology</p><p>3.2.1</p><p>Preparation of Soap</p><p>3.2.2</p><p>Comparing different</p><p>properties of soap with detergent</p><p>3.2.3</p><p>Blending of Oils</p><p>3.2.4</p><p>Calculation of TFM</p><p>3.2.5</p><p>Calculation of free alkali</p><p>3.2.6</p><p>Analysis of the best blend</p><p>3.2.7</p><p>Saponification Value</p><p>3.2.8</p><p>Iodine Value</p><p>3.2.9</p><p>Unsaponifiable Matter</p><p>3.2.10</p><p>Acid Value</p><p>

Chapter FOUR

SYSTEM TESTING AND EVALUATION

  • </p><p>Results and Discussion</p><p>4.1</p><p>Comparison of soap and detergent</p><p>4.2</p><p>Properties of soap after blending of oils</p><p>4.3</p><p>TFM values of soaps</p><p>4.4</p><p>Analysis of the best blend</p><p>4.5</p><p>Saponification Values</p><p>4.5</p><p>Iodine Values</p><p>4.6</p><p>Unsaponifiable Matter</p><p>4.7</p><p>Acid Value</p><p>

Chapter FIVE

SUMMARY, CONCLUSION AND RECOMMENDATIONS

  • </p><p>Conclusion</p><p>Chapter 6</p><p>References</p><p><strong>List of Tables</strong></p><p>Sl.no.</p><p>Name of the table</p><p>Page</p><p>no.</p><p>1</p><p>Composition of coconut oil</p><p>13</p><p>2</p><p>Yield of soap using individual oils</p><p>23</p><p>3</p><p>Properties of soap versus detergent</p><p>23</p><p>4</p><p>Moisture and Hardness of soap samples from</p><p>24</p><p>individual oils</p><p>5</p><p>Yield and pH values of soap samples from blending of</p><p>24</p><p>oils</p><p>6</p><p>Lathering and cleansing power of soap samples from</p><p>25</p><p>blending of oils</p><p>7</p><p>Moisture and Hardness of soap samples from blending</p><p>26</p><p>of oils</p><p>8</p><p>Total fatty matter of best blends of oils</p><p>27</p><p>9</p><p>Saponification value of the oil blend</p><p>28</p><p>10</p><p>Iodine value of the oil blend</p><p>28</p><p>11</p><p>Unsaponifiable matter</p><p>29</p><p>12</p><p>Acid Value of the oil blend</p><p>30</p> <br><p></p>

Project Abstract

<p> Soaps are the sodium salts or potassium salts of stearic acids or any other fatty acids. They are prepared by the saponification process, which is, reacting the oil which contain triglycerides with caustic soda (NaOH) to give the soap. However different oils have different composition of fatty acids which are responsible for different properties of soaps made out of them. In the present work 5 different types of oils are taken. They are blended in various ratios to prepare 14 different samples of soap. Different properties of these samples were analyzed to see which soap is the best one. The cleansing and lathering properties of all samples were compared. The blend of coconut oil and castor oil at 31 ratio is found out to be the best with 76.8% of TFM and 89.46% of yield. The best blend is analyzed for various properties and they were compared with that given in the literature. The saponification values, iodine values of coconut oil and castor oil were found out and these values were also found for the blend. It was found that the blend was having SAP value of 230.4 and iodine value of 40 which are higher than the individual values. Thus soap prepared using blend of both these oils has better properties than the soaps prepared by individual oils. <br></p>

Project Overview

Blazingprojects Mobile App

📚 Over 50,000 Project Materials
📱 100% Offline: No internet needed
📝 Over 98 Departments
🔍 Software coding and Machine construction
🎓 Postgraduate/Undergraduate Research works
📥 Instant Whatsapp/Email Delivery

Blazingprojects App

Related Research

Chemical engineering. 3 min read

Optimization of biodiesel production via microwave-assisted transesterification usin...

What This Project Is About A straightforward study of producing biodiesel, a renewable fuel, using a simple chemical process guided by microwaves. The project e...

BP
Blazingprojects
Read more →
Chemical engineering. 2 min read

Hydrogen storage materials optimization using metal-organic frameworks for scalable ...

What This Project Is About A straightforward exploration of how metal-organic frameworks (MOFs) can store hydrogen more efficiently for use in on-site fuel cell...

BP
Blazingprojects
Read more →
Chemical engineering. 4 min read

Optimization of catalytic pyrolysis of plastic waste into value-added fuels and chem...

What This Project Is About A practical study on turning plastic waste into useful fuels and chemicals by using a catalytic process that speeds up reactions, com...

BP
Blazingprojects
Read more →
Chemical engineering. 3 min read

Optimizing Microbial Electrochemical Systems (MES) for Sustainable Wastewater Treatm...

What This Project Is About A final-year project that explores how to treat wastewater while producing useful energy. It looks at a technology called a microbial...

BP
Blazingprojects
Read more →
Chemical engineering. 2 min read

Modeling and Optimization of Bioreactor Performance for Sustainable Biofuel Producti...

What This Project Is About This project explores how bioreactors can be run more efficiently to produce biofuels. It combines computer simulations of fluid flow...

BP
Blazingprojects
Read more →
Chemical engineering. 4 min read

Nanomaterial-assisted CO2 capture using solid sorbents for post-combustion flue gas ...

What This Project Is About This project explores using tiny, engineered materials (nanomaterials) attached to solid substances to capture carbon dioxide from fl...

BP
Blazingprojects
Read more →
Chemical engineering. 2 min read

Development of a Waste-to-Energy Process Using Microbial Electrochemical Cells for M...

What This Project Is About A plain-language overview of the topic and what the project investigates. The Problem It Addresses What problem or gap this project...

BP
Blazingprojects
Read more →
Chemical engineering. 3 min read

Design and optimization of a biochar-based hybrid adsorption–electrochemical capac...

What This Project Is About A simple, practical exploration of using a charcoal-like material called biochar inside a device that combines adsorption (pulling dy...

BP
Blazingprojects
Read more →
Chemical engineering. 4 min read

Solar-driven Photoelectrochemical Water Splitting for On-site Hydrogen Production Us...

What This Project Is About This project explores a way to split water into hydrogen and oxygen using sunlight, with a special setup that combines two types of l...

BP
Blazingprojects
Read more →
WhatsApp Click here to chat with us