Influence of (coated) stirrups on overlapped splice strength of epoxy coated deformed bars
Table Of Contents
- No response received.
Project Abstract
<p> </p><p><em> This paper investigates the </em><em>influence of coated stirrups on overlapped splice strength of epoxy coated deformed bars. Six (6) beams of length 2550mm </em><em> 300mm </em><em> with lapped splice bars in constant moment region were cast and tested. The beams where cast with 16mm high yield diameter bars for both compression and Tension zone, 8mm high yield stirrups were used over the lap splices.</em></p><p><em>The ultimate moment from the test were used to determine the stress developed in the bars. The ratios of the test bond stresses and bond stress values using the tensile reinforcement yield stress</em><em> , were used for comparison of the parameter under investigation. Coated and uncoated Transverse reinforcement was found to increase the splice strength of epoxy coated deformed bars, but uncoated transverse reinforcement was found to increase the splice strength of epoxy coated bars more than coated transverse reinforcement.</em></p> <br><p></p>Project Overview
Blazingprojects Mobile App
📚 Over 50,000 Project Materials
📱 100% Offline: No internet needed
📝 Over 98 Departments
🔍 Software coding and Machine construction
🎓 Postgraduate/Undergraduate Research works
📥 Instant Whatsapp/Email Delivery
Related Research
Optimization of biodiesel production via microwave-assisted transesterification usin...
What This Project Is About A straightforward study of producing biodiesel, a renewable fuel, using a simple chemical process guided by microwaves. The project e...
Hydrogen storage materials optimization using metal-organic frameworks for scalable ...
What This Project Is About A straightforward exploration of how metal-organic frameworks (MOFs) can store hydrogen more efficiently for use in on-site fuel cell...
Optimization of catalytic pyrolysis of plastic waste into value-added fuels and chem...
What This Project Is About A practical study on turning plastic waste into useful fuels and chemicals by using a catalytic process that speeds up reactions, com...
Optimizing Microbial Electrochemical Systems (MES) for Sustainable Wastewater Treatm...
What This Project Is About A final-year project that explores how to treat wastewater while producing useful energy. It looks at a technology called a microbial...
Modeling and Optimization of Bioreactor Performance for Sustainable Biofuel Producti...
What This Project Is About This project explores how bioreactors can be run more efficiently to produce biofuels. It combines computer simulations of fluid flow...
Nanomaterial-assisted CO2 capture using solid sorbents for post-combustion flue gas ...
What This Project Is About This project explores using tiny, engineered materials (nanomaterials) attached to solid substances to capture carbon dioxide from fl...
Development of a Waste-to-Energy Process Using Microbial Electrochemical Cells for M...
What This Project Is About A plain-language overview of the topic and what the project investigates. The Problem It Addresses What problem or gap this project...
Design and optimization of a biochar-based hybrid adsorption–electrochemical capac...
What This Project Is About A simple, practical exploration of using a charcoal-like material called biochar inside a device that combines adsorption (pulling dy...
Solar-driven Photoelectrochemical Water Splitting for On-site Hydrogen Production Us...
What This Project Is About This project explores a way to split water into hydrogen and oxygen using sunlight, with a special setup that combines two types of l...
