Effect of liquid flow rate and gas flow rate on a packed absorption tower and repair of equipment
Table Of Contents
- No response received.
Project Abstract
<p> </p><p>The purpose of the project is to study the effect of liquid flow rate and gas flow rate on the pressure drop in a packed absorption tower and also to repair and restore the packed absorption tower to good working condition.</p><p>Trouble shooting revealed that the exit drain value was broken due to carelessness on the part of former user of the equipment. We had to carry out glassblowing operations using borosilicate glass to construct another value. Once this was done pressure build up within the tower was restored for absorption operation to take place.</p><p>A plot of log DO/H against log a superficial gas velocity gave 2.0774 2.3037 and 1.4940 respectively for slopes at varied superficial liquid velocity.</p><p>We concluded that increase in gas flow rate lead to increase in pressure drop since the graph obtained is linear. There was a drop in slope from lower liquid rate to higher as operation neared flooding condition. This means that industrially more cost is alluded to pumping operation to be successful.</p> <br><p></p>Project Overview
<p> </p><p><strong>Chapter One</strong><br>1.1 Introduction<br>1.2 Objectives Of The Project</p><p><strong>Chapter Two</strong><br>2.0 Literature Review<br>2.1 Pressure Drop<br>2.3 Loading And Flooding<br>2.4 Description Of Tower<br>2.7 Packing Characteristic<br>2.7.3 Water Pump Operation<br>2.8 Design Procedure Of Tower<br>2.8.2 Selection Of Solvent</p><p><strong>Chapter Three</strong><br>3.0 Experiment Procedure<br>3.1 Glass Blowing Process And Procedure<br>3.1.1 General Physical Properties Of Glass<br>3.1.2 General Chemical Properties Of Glass<br>3.2 Borosilicate Glass Properties<br>3.3 Construction Of Drain Value</p><p><strong>Chapter Four</strong><br>4.1 Data Analysis<br>4.2 Discussion</p><p><strong>Chapter Five</strong><br>5.1 Conclusion<br>5.2 Recommendation References<br>Appendix 1:Summary Of Calculation<br>Graph 11:Plot Of Log Dp/H Vs Log A 46<br>Appendix 111:Cost Of Repairing Equipment 49<br>Appendix 111:Scale Drawing Of Packing Absorption Tower.<br>Chapter One of Effect Of Liquid Flow Rate And Gas Flow Rate On A Packed Absorption Tower And Repair Of Equipment Project Material starts from here.</p> <br><p></p>Blazingprojects Mobile App
📚 Over 50,000 Project Materials
📱 100% Offline: No internet needed
📝 Over 98 Departments
🔍 Software coding and Machine construction
🎓 Postgraduate/Undergraduate Research works
📥 Instant Whatsapp/Email Delivery
Related Research
Optimization of biodiesel production via microwave-assisted transesterification usin...
What This Project Is About A straightforward study of producing biodiesel, a renewable fuel, using a simple chemical process guided by microwaves. The project e...
Hydrogen storage materials optimization using metal-organic frameworks for scalable ...
What This Project Is About A straightforward exploration of how metal-organic frameworks (MOFs) can store hydrogen more efficiently for use in on-site fuel cell...
Optimization of catalytic pyrolysis of plastic waste into value-added fuels and chem...
What This Project Is About A practical study on turning plastic waste into useful fuels and chemicals by using a catalytic process that speeds up reactions, com...
Optimizing Microbial Electrochemical Systems (MES) for Sustainable Wastewater Treatm...
What This Project Is About A final-year project that explores how to treat wastewater while producing useful energy. It looks at a technology called a microbial...
Modeling and Optimization of Bioreactor Performance for Sustainable Biofuel Producti...
What This Project Is About This project explores how bioreactors can be run more efficiently to produce biofuels. It combines computer simulations of fluid flow...
Nanomaterial-assisted CO2 capture using solid sorbents for post-combustion flue gas ...
What This Project Is About This project explores using tiny, engineered materials (nanomaterials) attached to solid substances to capture carbon dioxide from fl...
Development of a Waste-to-Energy Process Using Microbial Electrochemical Cells for M...
What This Project Is About A plain-language overview of the topic and what the project investigates. The Problem It Addresses What problem or gap this project...
Design and optimization of a biochar-based hybrid adsorption–electrochemical capac...
What This Project Is About A simple, practical exploration of using a charcoal-like material called biochar inside a device that combines adsorption (pulling dy...
Solar-driven Photoelectrochemical Water Splitting for On-site Hydrogen Production Us...
What This Project Is About This project explores a way to split water into hydrogen and oxygen using sunlight, with a special setup that combines two types of l...
