Construction of motorized mixer

Project Abstract

<p> </p><p>The fabrication of the pilot motorized mixer in volved a preliminary computation of the durunsions of the galvanized steel used, marketing out cutting out to sizes folding, welding, assembling and painting.</p><p>The dimensions of the motorized mixer are as follows The vessel is of 300min in diameter and 450mm in height, the conical edge of the cover is of 300mm in diameter which is formed by are welding operation.</p><p>Th vertical shaft (spindle) is of 450 mm in length and 300mm in diameter the impeller blade is 80mm in diameter 150mm in length which is marketed of the galvanized steel of 2mm thickness.</p><p>An electric motor of about 1 hp is mounted vertically in the mixer barrel. The blades are carried and positioned at the extreme for the turning operation.</p><p>The constructional material used is locally source and is selected to suit the desired purposes such as galvanized steel which resists rusting the constructed pilot motorized mixer was tested and functioned effectively which can be compared with other important mixer in our market on terms of efficiency and cost and which has application in processing and applied industries.</p> <br><p></p>

Project Overview

<p> </p><p>INTRODUCTION</p><p><strong>CHAPTER TWO</strong></p><p>LITERATURE REVIEW</p><p><strong>CHAPTER THREE</strong></p><p>CONSTRUCTION PATTERN (PROCEDURE) –</p><p>ECONOMIC ANALYSIS</p><p><strong>CHAPTER FOUR</strong></p><p>CONCLUSION AND RECOMMENDATION</p><p>REFERENCE</p> <br><p></p>