DESIGN, CONSTRUCTION AND PERFORMANCE EVALUATION OF A TWO SELF-IGNITED GAS COOKER

 

Table Of Contents


Chapter ONE

INTRODUCTION

  • 1.1Introduction
  • 1.2Background of Study
  • 1.3Problem Statement
  • 1.4Objective of Study
  • 1.5Limitation of Study
  • 1.6Scope of Study
  • 1.7Significance of Study
  • 1.8Structure of the Research
  • 1.9Definition of Terms

Chapter TWO

LITERATURE REVIEW

  • 2.1Overview of Gas Cookers
  • 2.2History of Self-Ignited Gas Cookers
  • 2.3Types of Gas Cookers
  • 2.4Advantages of Self-Ignited Gas Cookers
  • 2.5Disadvantages of Self-Ignited Gas Cookers
  • 2.6Market Trends of Gas Cookers
  • 2.7Consumer Preferences for Gas Cookers
  • 2.8Innovations in Gas Cooker Technology
  • 2.9Safety Features in Gas Cookers
  • 2.10Environmental Impact of Gas Cookers

Chapter THREE

RESEARCH METHODOLOGY

  • 3.1Research Design
  • 3.2Data Collection Methods
  • 3.3Sampling Techniques
  • 3.4Research Instruments
  • 3.5Data Analysis Procedures
  • 3.6Ethical Considerations
  • 3.7Pilot Testing
  • 3.8Data Validation Techniques

Chapter FOUR

DATA PRESENTATION AND ANALYSIS

  • 4.1Analysis of Data
  • 4.2Comparison of Results
  • 4.3Discussion of Findings
  • 4.4Interpretation of Results
  • 4.5Implications of Results
  • 4.6Recommendations for Practice
  • 4.7Recommendations for Future Research
  • 4.8Limitations of the Study

Chapter FIVE

SUMMARY, CONCLUSION AND RECOMMENDATIONS

  • 5.1Summary of Findings
  • 5.2Conclusion
  • 5.3Contributions to Knowledge
  • 5.4Practical Implications
  • 5.5Recommendations for Further Action
  • 5.6Areas for Future Research

Project Abstract

<p>&nbsp;                 <b>ABSTRACT&nbsp;</b></p><p>The gas cooker is a cooking appliance available in several forms the single face burner, the multi-face burner, the manually ignited cooker and the self-ignited cooker. The gas used is natural gas, propane, butane, liquefied petroleum gas or other flammable gas as a fuel source. The objective of this work is to design and construct a two self-ignited gas cooker with good working efficiency using available materials. The design, construction and performance evaluation of a two self-ignited gas cooker requires using locally available materials such as a stainless steel plate (for the cooking surface), regulator, gas cylinder, hose, clips, burners, hobs, gas etc. The gas cooker is with gas rings and a cook top for cooking with gas. The gas cooker also contains a heating element that transforms fuel or electricity into heat. For the design of this project, Auto-cad 3D drawing was use. For this study, four different observations were taken for two different types of gas cooker burners. A reading was taken for each type of burners in a single burning condition Cold Start Test and the other is to observe the time taken to boil a certain amount of rice. However, the method adopted on obtaining this condition is subjective (i.e. visual inspection on flame was carried out when the knob was tuned). Optimum burning condition can also be obtained by objective methodology and for this it is essential to measure the boiling temperature with high capacity thermometers. The efficiencies of the two different burners of the double gas cooker was calculated and was found to be 50-93% for optimum burning condition. The efficiency of the given burner is not constant. Those values could vary on the basis of surrounding conditions and quality of the gas cooker. The high value of efficiency could be obtained in optimum burning condition in field however this value is normally lower than the value obtained in controlled laboratory condition. The efficiency of gas cookers depends on 1. Environmental conditions such as wind, temperature and pressure. 2. Burner size of cooker and size of bottom face of cooking vessel. KEYWORDS Gas Cooker, Self-Ignited Cooker, Burner, Gas, Performance Evaluation <br></p>

Project Overview

<p> <b>INTRODUCTION&nbsp;</b></p><p>A gas cooker is a range with gas rings and a cook top for cooking with gas. The gas ring is a burner consisting of a circular metal pipe with several small holes through which gas can escape to be burned. The gas cooker also contains a heating element that transforms fuel or electricity into heat. It is a cooking appliance available in several forms: the single face burner, the multi-face burner, the manually ignited cooker and the self-ignited cooker. The self-ignited cooker can also be of a single faced burner or of a multi-faced burner. Either type though, works with a self-ignition device. The gas used is natural gas, propane, butane, liquefied petroleum gas or other flammable gas as a fuel source. The essence of using a self-ignited gas cooker during cooking is the comfort it gives, safety, ease of use and because of the high rate of heat it generates. The gas stoves tend to great economy, as they are not lit till the moment wanted, then only the quality required, and may be put out the moment it is done with”. James patented a gas cooker in Northampton, England in the year 1826 and opened a gas cooker factory in 1836. His invention was marketed by the firm Smith &amp; Philips from 1828 (Utoft and Thompson, 2006). <br></p><p> The gas cooker is considered as an effective cooking appliance due to the above importance. Over the years, several cooking appliances have been invented and used for cooking. All of these cooking appliances require heat and as such derive heat through various means. The most common and ancient cooking appliance is the use of firewood. A bunch of dry wood is put together and a means of igniting the wood with fire is required. However, in a self-ignited gas cooker, firewood is not needed neither is there the need for a manual ignition. A major improvement in fuel technology came with the advent of gas. The first gas cooker was developed as early as the 1820s, but these remained isolated experiments. An important figure in the early acceptance of this new technology was Alexis Soyer, the renowned chef at the Reform Club in London. From 1841, he converted his kitchen to consume piped gas, arguing that gas was cheaper overall because the supply could be turned off when the cooker was not in use. James Sharp patented a gas cooker in Northampton, England in 1826 and opened a gas cooker factory in 1836. His invention was marketed by the firm Smith &amp; Philips from 1828, (Snodgrass, 2004). In this project, the twin auto-ignition cooker is used as a key study.&nbsp;<br></p><p>  Gas cooker today use two basic types of ignition sources, standing pilot and electric. A cooker with a standing pilot has a small, continuously burning gas flame (called a pilot light) under the cook top. The flame is between the front and back burners. When the cooker is turned on, this flame lights the gas flowing out of the burners. The advantage of the standing pilot system is that it is simple and completely independent of any outside power source. Electric ignition cooker use electric sparks to ignite the surface burners. This is the "clicking sound" audible just before the burner actually lights. The sparks are initiated by turning the gas burner knob to a position typically labeled "LITE" or by pressing the 'ignition' button. Once the burner lights, the knob is turned further to modulate the flame size. <br></p><p> Auto reignition is an elegant refinement; the user need not know or understand the wait-then-turn sequence. They simply turn the burner knob to the desired flame size and the sparking is turned off automatically when the flame lights. Auto reignition also provides a safety feature: the flame will be automatically reignited if the flame goes out while the gas is still on--for example by a gust of wind. If the power fails, surface burners must be manually match-lit. Electric ignition for cookers uses a "hot surface" or "glow bar" igniter. Basically it is a heating element that heats up to gas's ignition temperature. A sensor detects when the glow bar is hot enough and opens the gas valve. Normally a burner plays an important role in any combustion system. Since proper efficient modifications of a burner often leads to an efficient combustion and possibility to produce less pollutant formation. Its consumption in domestic cooking is increasing every year at the rate of approximately 10 %.(Pankaj and Salim, 2011). Nearly all atmospheric (venturi) burners have a gas orifice that is accurately fixed in the burner throat providing air intake. The hole in the orifice is very small to provide the correct gas flow and to provide sufficient velocity to ensure there is suction (vacuum) available for the correct air inspiration. (Pantangi et al, 2007). <br></p><p> The Liquefied Petroleum Gas (LPG), which is a multi-purpose fuel that is clean, safe and energy efficient is most preferably used. LPG is a clean and environmentally friendly source of energy and in order to protect the environment, LPG should be made accessible to all households as substitute to wood and biomass in many developing countries (Chikwendu, 2011). In a conventional burner, LPG and air are required to be mixed before combustion in the throat of the burner where reactions occur. There is a single flame zone. Burner work on the principle called the venture-effect. It says that as a gas passes through a pipe that narrows or widens, the velocity and pressure of the gas vary. When pipe is narrows, the flow of gas is more rapidly. When the gas flows faster through the narrow sections the pressure decreases However, gas cookers can present potentially hazardous problems if poorly installed or maintained. Although modern cookers usually come with excellent safety features, they still occasionally leak poisonous, flammable or explosive fumes. Extinguished pilot lights can release carbon monoxide (CO) into your home environment. CO is a colorless, odorless gas that can lead to sudden illness and even death. A way to avoid this hazard is by investing in a carbon monoxide detector. Having the gas cooker checked once a year by a qualified service technician to ensure the appliance isn’t leaking any gas fumes that can cause explosions or fires. (Carson, 2013) The objective of this work is to design, construct and performance evaluation of a self-ignited gas cooker in order to improve its efficiency, to generate scientific data that define the conditions that leads to either a higher efficiency or lower efficiency burner and to support practical recommendations for attaining a better efficiency gas cooker. <br></p><p><b>1.2 MATERIAL AND METHOD&nbsp;</b></p><p>A self-ignited gas cooker was designed with an auto-igniter. The gas cooker has preferably, a stainless steel surface (to prevent corrosion), burners and a gas source. The auto-ignition is to lit the gas cooker burner with flame and this flame with the aid of a gas source is used for cooking. The gas cooker has two knobs which controls the two burners. This knob when turned on makes a clicking sound, and then creates a spark which lit the burner with flame. It also releases a required amount of gas into the burner to aid the continuous lit of flame until the knob is turned off. The materials to be used will be gotten locally. <br></p><p> <b>Material Selection&nbsp;</b></p><p>The materials to be used for the fabrication of an auto ignition gas cooker will be sourced locally. The aim is to produce the machine at the lowest possible cost, increase its economic efficiency and make it available to the end users. The factors considered in the selection of materials are the following: <br></p><p> Availability of the material.&nbsp;</p><p>• Mechanical property (strength, durability, corrosion resistance).&nbsp;</p><p>• Cost.</p><p> <b>Materials&nbsp;</b></p><p>The materials used are stainless steel plate (for the cooking surface), regulator, gas cylinder, hose, clips, burners, knobs, gas and igniter. &nbsp; <br></p><p> <b>Materials, Fittings and Components&nbsp;</b></p><p>Materials, fittings and components used in any gas installation shall be suitable for use with the:</p><p>&nbsp;• Type of gas being conveyed;</p><p> • The pressure to which they may be subjected under both operating and fault conditions&nbsp;</p><p>• The environment in which they are installed.&nbsp;</p><p>Cooker Construction&nbsp;</p><p>The other major factor, which affects the efficiency of the Cooker, is the constructional feature of the cooker. Gas cookers are found in the market in different shape and constructional features. The constructional features of the Gas cookers which affects the efficiency are:&nbsp;</p><p>• Burner types (orientations of holes, shape and size of holes, burner size)&nbsp;</p><p>• Space between burner and the other vessel supporting mechanism&nbsp;</p><p>• Air control mechanism and optimization on burning etc.&nbsp;</p><p>Stainless steel was used in the fabrication of the body of the cooker. This sheet was cut from a roll of sheet, bent and joined together by welding. The other parts, like the igniter, burner, gas rod and knobs is then attached to the welded frame using mainly bolt and nut. The knobs were attached to exterior front side of the cooker and then, the cooker was sprayed with blue color. &nbsp; <br></p>

Blazingprojects Mobile App

📚 Over 50,000 Project Materials
📱 100% Offline: No internet needed
📝 Over 98 Departments
🔍 Software coding and Machine construction
🎓 Postgraduate/Undergraduate Research works
📥 Instant Whatsapp/Email Delivery

Blazingprojects App

Related Research

Agric Economics. 2 min read

Impact of climate variability on maize production efficiency and farm profitability ...

What This Project Is About A plain-language overview of why climate variability affects maize farming and how we measure efficiency and profits using a simple m...

BP
Blazingprojects
Read more →
Agric Economics. 3 min read

Impact of climate shocks on smallholder coffee farmers’ productivity and household...

What This Project Is About A straightforward study that looks at how climate-related events like droughts, heavy rains, and temperature changes affect smallhold...

BP
Blazingprojects
Read more →
Agric Economics. 3 min read

Impact of Climate-Smart Agriculture Adoption on Smallholder Farm Income and Risk Man...

What This Project Is About A plain-language overview of how climate-smart farming ideas affect small farmers’ earnings and how they manage risk, using practic...

BP
Blazingprojects
Read more →
Agric Economics. 4 min read

Assessing the Impact of Climate-Smart Agricultural Practices on Smallholder Farm Pro...

What This Project Is About A plain-language overview of how climate-smart farm practices can affect smallholder farmers’ profits and their ability to withstan...

BP
Blazingprojects
Read more →
Agric Economics. 3 min read

Impact of Climate Risk on Smallholder Farm Productivity and Income in [Country/Regio...

What This Project Is About A straightforward study of how climate risks affect smallholder farmers’ crop yields and earnings, and how farmers adapt. It looks ...

BP
Blazingprojects
Read more →
Agric Economics. 3 min read

Impact of climate variability on smallholder maize profitability and adaptive strate...

What This Project Is About A plain-language overview of how climate changes affect smallholder farmers growing maize and how these farmers can adapt to keep pro...

BP
Blazingprojects
Read more →
Agric Economics. 4 min read

Economic viability and impact of precision agriculture adoption on smallholder maize...

What This Project Is About A plain-language overview of how smallholder farmers in sub-Saharan Africa could use precision agriculture tools and practices to imp...

BP
Blazingprojects
Read more →
Agric Economics. 3 min read

Impact of Climate-Smart Agricultural Practices on Smallholder Farm Productivity and ...

What This Project Is About A straightforward study of how climate-smart farming practices can influence the productivity of small farms and the way households s...

BP
Blazingprojects
Read more →
Agric Economics. 2 min read

Impact of climate variability on smallholder maize productivity and livelihoods in [...

What This Project Is About A simple, real-world study of how changing weather and climate patterns affect the yield of maize grown by small farmers and how thes...

BP
Blazingprojects
Read more →
WhatsApp Click here to chat with us