Blazingprojects Mobile App
📚 Over 50,000 Project Materials
📱 100% Offline: No internet needed
📝 Over 98 Departments
🔍 Project Journal Publishing
🎓 Undergraduate/Postgraduate
📥 Instant Whatsapp/Email Delivery
Civil engineering
Showing 1-570 of 748 projects
Utilization of steel slag for stabilization of a lateritic soil...
<p> A lateritic soil classified as sandy clay or (CL) and A-7-6 (5) according to Unified Soil Classification System (USCS) and AASHTO classification sy...
Evaluation of water quality modelling parameters: towards the evolvement of re-aerat...
<p> This study was carried out on River Atuwara in Ota, Ogun State, Nigeria with the aim of developing a coefficient of re-aeration model applicable to...
An assessment of the impact of abattoir effluent discharge on the water quality of r...
<p> This report presents results obtained from the investigation and water sampling exercise carried out on the segment of River Illo that passes throu...
A mathematical model for prediction of the strength of sancrete cement block...
<p> Sandcrete blocks are prismatic units manufactured from lean (sand-cement) mortar mixes and are the predominant walling materials used in buildings ...
Five component concrete mix optimization of aluminum waste using scheffe’s the...
<p> The research investigated some mechanical properties of aluminum waste concrete to harness its structural properties in the construction industry. ...
Five component concrete mix optimization of aluminum waste using scheffe’s the...
<p> The research investigated some mechanical properties of aluminum waste concrete to harness its structural properties in the construction industry. ...
Fracture mechanics of glass fibre reinforced polyester composites (gfrp) subjected t...
<p> Glass mat reinforcement, which can be easily shattered, is widely used across the world in military, automobile, civil, railway and electronic engi...
Heat and mass transfer analysis of potato drying in a kerosene heated oven...
<p> Majority of small scale farmers and homes are still using open-sun and/or non-convective methods for drying due to either high cost of gas/electric...
Improvement of the performance of thermal power systems through energy and exergy an...
<p> This research work is aimed at using the energy and exergy analysis with thermodynamic data to suggest improvements in the performance of steam and...
Integrated solar and hydraulic jump enhanced waste stabilization pond...
<p> This study on the integrated solar and hydraulic jump enhanced waste stabilization pond (ISHJEWSP) is aimed at determining the effect of variations...
Modelling the biodegradability of sewage in ordinary pit latrines...
<p> Specific models for the design of pit latrines of different shapes and sizes are non-existent. What are available are general design guides irrespe...
Motivational factors in human resource management (hrm) in construction projects &nd...
<p> The primary objective of this study was to investigate the rank importance or most significant motivating factors on construction employees in Sout...
Optimization and modelling of rice husk ash-clay soil stabilization...
<p> The over dependent on the utilization of industrially manufactured soil improving additives (cement, lime etc), have dept the cost of such stabiliz...
Optimization of production down time in innoson plastic manufacturing industry...
<p> Optimization of production downtime in plastic manufacturing serves as a method to minimize machine downtime. This paper describes how to minimize ...
Phytoremediation of hydrocarbon polluted soil using kenaf (hibiscus cannabinus l.) p...
<p> Contamination of existing and potential agricultural lands is a major problem associated with the processing and distribution of crude and refined ...
Reinvigoration of project works in nigeria through compulsory green construction, (c...
<p> Global warming is a serious problem facing the world today as well as the world in the future if left unchecked. In order to stop or avert this pro...
Safety analysis of structural foundations built on abandoned solid waste sites...
<p> This study adopted experimental design to investigate the suitability of abandoned solid waste site soil (ASWSS) as a foundation material for build...
The effect of notches on the strength of coir – reinforced cashew nut shell re...
<p> The effect of notches on the strength of Coir – reinforced cashew nut shell resin composite was investigated. Composite laminates with six di...
The effects of rotational inertia on the response of dynamically loaded structures...
<p> Engineering structures subjected to dynamic loading exhibit vibration motions. These vibrations induce accelerations on the structures and their co...
Exergetic efficiency of passive solar air heater with phase change energy storage ma...
<p> Energy and exergy analysis of solar air heater with phase change material energy storage is considered in this research work. Energy and exergy mod...
Experimental performance evaluation of charcoal-stove...
<p> An experimental evaluation of the performance of a charcoal stove designed to reduce human labour and health hazards associated with frying in open...
Design of an efficient solid waste management and disposal scheduling system- a case...
<p> The Design of an Efficient Solid Waste Management and Disposal Scheduling System in a metropolis is hereby presented. The design employed ten landf...
Development of layered elastic analysis procedure for prediction of fatigue and rutt...
<p> It is generally known that the major causes of failure in asphalt pavement is fatigue cracking and rutting deformation, caused by excessive horizon...
Dynamics of orthotropic plates using characteristic orthogonal polynomial- galerkin&...
<p> The assumed deflection shapes used in the approximate method such as in the Galerkin method were normally formulated by inspection and sometimes by...
Effect of refuse dump on underground water quality...
<p> The major source of water in EMENE, the study area is rain, streams and well water. Waste management has been a problem in Nigeria and so many deve...
Effects of addition of carbide on sewage degradation...
<p> The objective of this research is to investigate the effect of addition of carbide on sewage degradation. To provide answers to the above objective...
Effects of particle sizes on bioremediation of crude oil polluted sandy soils...
<p> Bioremediation has been proven to be the most effective method of cleaning up oil contaminated soils through the application of nutrients and micro...
Energy and exergy analysis of boiler ...
<p> In this work, the results of the analysis of the NBC boiler plant using energetic and exergetic methods are presented. The main aim of this study i...
Estimation of biogas reactor constants using multiple regression analysis...
<p> Biogas generation is accomplished by anaerobic digestion of biodegradable material in a biogas digester. Anaerobic digestion as a process requires ...
An evaluation of the potentials of natural gas in the economic development of nigeri...
<p> </p><p>This study brought to the fore, a critical evaluation of the potentials of natural gas in the economic development of Nigeria. N...
