Blazingprojects Mobile App
📚 Over 50,000 Research Thesis
📱 100% Offline: No internet needed
📝 Over 98 Departments
🔍 Thesis-to-Journal Publication
🎓 Undergraduate/Postgraduate Thesis
📥 Instant Whatsapp/Email Delivery
Chemical engineering
Showing 1-540 of 843 Thesis
Formulation and comparism of industrial bar soap and detergent...
<p> </p><p>Stabilized adhesive was developed and produced. The development was made by the production of samples of the adhesive with vari...
The construction of sieve analysis equipment...
<p> </p><p>The sets of seizes with shaker which was fabricated and assembled in the Chemical Engineering pilot plant was aimed at providing...
Solid waste separation and utilization...
<p> </p><p>This project was done to bring to lime light the appropriate method of solid waste handling, separation and utilization, in orde...
The potentials for a co-operative thrift credit society in a higher education instit...
Abstract: This research project explores the potentials for establishing a co-operative thrift credit society within a higher education institution. The aim of...
The effects of the action of detergent and soap on soil/dirty substance during washi...
<p> </p><p>This seminar was carried out with the sole aim of knowing the effects of the action of soap and detergent on soil/dirty substanc...
Production and characterization of soft soap from local potash (ngu) or causticProdu...
<p> </p><p>This project was aimed at producing a fine high quality toilet soap at a low cost which will be of used to home and commercial p...
Production and characterization of soft soap from local potash (ngu) or caustic pota...
<p> </p><p>This project was aimed at producing a fine high quality toilet soap at a low cost which will be of used to home and commercial p...
Production of slow burning candle...
<p> </p><p> The project was carried out to produce slow burning candle for domestic uses. The project was carried out using the f...
Construction of soap moulds, table and cutters...
<p> </p><p> A mould can generally be defined as a pattern constructed for the production of the same shape and size. ...
Extraction of oil from a local seed (groundnut seed) and characterization...
<p> </p><p>This project “Extraction of oil from a local seed (groundnut oil) and Characterization” was carried out using ten cu...
Production of emulsion paint with the available material...
<p> </p><p>This project is on the production of paint from the available materials. The first process involved was the sourcing of the ava...
Adsorption of palm oil with synthetic adsorbent (coal)...
<p> This project was Carrie lent using sub-bituminous coal and crude palm oil. The degree of bleaching of the palm oil was monitored with a spectorpho...
Production of liquid and vapourized perfume...
<p> </p><p>This research project was carried out principally for the production of liquid and vapourized perfumes from local raw materials....
Analysis of enugu coal...
<p> </p><p>The project Analysis of Enugu Coal was done to determine the characteristic properties of Enugu Coal with particular emphasis on...
Maintenance of pilot plant spray dryer...
<p> </p><p>Spray substance are used to make home grnow powered substance whose particles are usually spherical in shape and approximately 1...
Refurbishing of a fixed and fluidized bed...
<p> </p><p>The repair of the fixed bed adsorption column, a product of arm field technical company was carried out for the purpose of bring...
Crises management in industrial environment...
<p> </p><p>A study was carried out on crisis management which originated with the large scale industrial and environment disaster in the 19...
Construction of 2,000 litres capacity water re-servoir...
<p> </p><p>In the construct of 2,000 litres capacity water reservoir galvanized steel sheet forms the tank and an angle iron rod forms th...
Sythesis of activated carbon...
<p> </p><p>This project was carried out using coal sample from Onyeama coal mine Enugu, Enugu State. Activated coal was produced by carbon...
Temperature and water requirement for leaching of caustic alkalt from 'ngu"...
<p> </p><p>The production and analysis of “Ngu” extract for temperature and water requirement for leaching of casuistic alkali ...
Production of high quality liquid air refresher...
<p> </p><p>A project was carried out to produce high quality liquid air refreshner for domestic uses. The project was carried out using the...
Refining of vegetable oil with enugu coal...
<p> </p><p>This project was carried out using acid activated coal from Enugu coal and the production of ve4getablew oil was monitored using...
Construction of soap cutting table, soap mould and soap cutters...
<p> </p><p> The construction of soap cutting table, mould and cutters became inevitable as it’s impo...
Industrial wastewater treatment technology in petroleum and chemical industrial...
<p> </p><p>Industrial wastewater treatment covers the mechanisms and process used to treat water that have been contaminated in some way by...
Construction of vertical fire tube boiler...
<p> </p><p> The construction of this vertical fire tube boiler was carried out both at the industrial center and Mecha...
Dehydration of ethanol water solution using activated starch...
<p> This project research work was based on dehydration of ethanol water solution using activated starch. The extracted starch obtained was of whistler...
Effect of interface on the quality of petroleum product in multi purpose pipeline sy...
<p> </p><p>Interface on petroleum product in multi-purpose pipeline system refers to as the zone of demarcation between two products where ...
Report o fabrication of flow nozzle...
<p> </p><p>The flow nozzle was constructed based on the dimensions and specifications of the international standard organization (I.S.O) re...
Process and quality factors in laundary and toilet soap production...
<p> </p><p>This projects is aimed at knowing the process and quality factor in Laundary and Toilet Soap Projection. Various factors affect...
Report on the fabrication of sieve system...
<p> </p><p>The construction of sieves system was carried out in the Engineering workshop, Institute of management and technology, Enugu.<...
