Home / Mechanical engineering / Evaluation of elephant grass (pennisetum purpureum) as substrate for bioethanol production using co-cultures of aspergillus niger and saccharomyces cerevisiae

Evaluation of elephant grass (pennisetum purpureum) as substrate for bioethanol production using co-cultures of aspergillus niger and saccharomyces cerevisiae

 

Table Of Contents


Project Abstract

<p> </p><p>Elephant grass (<em>Pennisetum purpureum</em>) was evaluated for its ethanol production potential using co-cultures of <em>Aspergillus niger</em>&nbsp;and <em>Saccharomyces cerevisiae</em>isolated from local sources. Proximate and lignocellulose analysis carried out on the plant sample showed that it had crude fibre, lignin, hemicellulose and cellulose contents of 31.5%, 26.78%, 18.76% and 34.16% respectively. <em>Aspergillus niger</em>&nbsp;strains were isolated from soil and bread and were further screened for both qualitative and quantitative cellulase production. Qualitative cellulase assay revealed clear zones around colonies indicative of enzyme activity on solid agar medium containing 0.1% carboxymethyl cellulose (CMC) for all the isolates. Quantitative cellulase assay showed that <em>A. niger</em>&nbsp;isolate AN-15 from soil gave highest cellulase yield of (0.1792 IU/ml/min) and was therefore selected as a co-culture with</p><p><em>S. cerevisiae</em>.<em>&nbsp;Saccharomyces cerevisiae </em>strains were isolated from palm wine and burukutu.Isolate PW-4 was selected for fermentation based on ethanol tolerance tests and assimilation of more sugars compared to other isolates. Fermentation of grass substrate was carried out at different concentrations ranging from 2-10% and highest ethanol yield of 1.68g/100ml was observed at an optimum substrate concentration of 6% though the yield was much less than that obtained from equal concentration of glucose (8.38g/100ml). Optimization of culture parameters for ethanol production showed maximum ethanol yield at pH 5, 35oC and agitation rate of 300 rpm. The results of the research also revealed that ethanol production by <em>S. cerevisiae</em>&nbsp;beyond the fourth day of fermentation is significantly reduced.</p><p>&nbsp;</p> <br><p></p>

Project Overview

<p> </p><p><strong>1.0</strong>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;<strong>INTRODUCTION</strong></p><div>Ethanol fuel, ethyl alcohol (CH3CH2OH), is the same type of alcohol found in alcoholic beverages. It is an oxygenated fuel with a high octane value like that of petroleum fuels known to run combustion engines at higher compression ratios and thus provides superior performance (Wheals <em>et al</em>., 1999). The blending of ethanol into petroleum-based automobile fuels can significantly decrease petroleum use and decrease the release of greenhouse gas emissions. Furthermore, ethanol can be a safer alternative to the common additive, methyl tertiary butyl ether (MTBE), in gasoline. Methyl tertiary butyl ether is toxic and is a known contaminant in ground water. Thus, ethanol can be a substitute to mitigate the problems associated with the rising energy demands across the world as well as a way to reduce greenhouse gas emission to as high as 85% (Perlack <em>et al</em>., 2005).</div><p>Ethanol may be produced either from petroleum products or from biomass substrate. Today, most of the ethanol produced comes from renewable resources (Bothast and Saha, 1997). Although, most of the ethanol currently produced from renewable resources come from sugarcane and starchy grains, significant efforts are being made to produce ethanol from lignocellulosic biomass (almost 50% of all biomass in the biosphere such as agricultural residues are lignocellulosic biomass). The technological advances in recent years are promising to produce ethanol at low cost from lignocellulosic biomass (Bothast and Saha, 1997).</p><p>Bioethanol production from sugarcane and starch-rich feed stocks such as corn, potato, is considered a first generation process because it has already been developed (Joshi <em>et al</em>., 2011).</p> <br><p></p>

Blazingprojects Mobile App

📚 Over 50,000 Project Materials
📱 100% Offline: No internet needed
📝 Over 98 Departments
🔍 Project Journal Publishing
🎓 Undergraduate/Postgraduate
📥 Instant Whatsapp/Email Delivery

Blazingprojects App

Related Research

Mechanical engineeri. 2 min read

Design and analysis of a solar-powered desalination system for remote communities....

The project "Design and Analysis of a Solar-Powered Desalination System for Remote Communities" aims to address the pressing need for sustainable acce...

BP
Blazingprojects
Read more →
Mechanical engineeri. 2 min read

Design and Optimization of a Solar-Powered Refrigeration System...

The project topic, "Design and Optimization of a Solar-Powered Refrigeration System," focuses on the development of an innovative and sustainable cool...

BP
Blazingprojects
Read more →
Mechanical engineeri. 2 min read

Design and Optimization of a Fuel-Efficient Hybrid Electric Vehicle Powertrain...

The project on the "Design and Optimization of a Fuel-Efficient Hybrid Electric Vehicle Powertrain" aims to address the pressing need for sustainable ...

BP
Blazingprojects
Read more →
Mechanical engineeri. 4 min read

Design and development of an energy-efficient wind turbine for urban applications...

The project "Design and development of an energy-efficient wind turbine for urban applications" aims to address the growing need for sustainable energ...

BP
Blazingprojects
Read more →
Mechanical engineeri. 2 min read

Design and optimization of a novel energy-efficient HVAC system for commercial build...

The project topic, "Design and optimization of a novel energy-efficient HVAC system for commercial buildings," focuses on addressing the growing need ...

BP
Blazingprojects
Read more →
Mechanical engineeri. 3 min read

Design and analysis of an energy-efficient hydraulic system for industrial applicati...

The project on "Design and Analysis of an Energy-Efficient Hydraulic System for Industrial Applications" aims to address the growing need for sustaina...

BP
Blazingprojects
Read more →
Mechanical engineeri. 4 min read

Design and Development of an Automated Robotic Arm for Industrial Applications...

The project topic, "Design and Development of an Automated Robotic Arm for Industrial Applications," focuses on the innovative integration of robotics...

BP
Blazingprojects
Read more →
Mechanical engineeri. 3 min read

Design and optimization of an energy-efficient hybrid vehicle powertrain....

The project on "Design and optimization of an energy-efficient hybrid vehicle powertrain" focuses on addressing the growing need for sustainable trans...

BP
Blazingprojects
Read more →
Mechanical engineeri. 3 min read

Design and Optimization of a Solar-Powered Cooling System for Automotive Application...

The project "Design and Optimization of a Solar-Powered Cooling System for Automotive Applications" focuses on the development of an innovative coolin...

BP
Blazingprojects
Read more →
WhatsApp Click here to chat with us