Home / Mechanical engineering / The microbial safety of commercial poultry feeds

The microbial safety of commercial poultry feeds

 

Table Of Contents


Project Abstract

Abstract
The microbial safety of commercial poultry feeds is a critical aspect of poultry production as it directly impacts bird health and overall food safety. This research project aimed to investigate the levels and types of microbial contaminants present in commercial poultry feeds, with a focus on bacteria, fungi, and mycotoxins. A total of 50 samples from different commercial poultry feed manufacturers were collected and analyzed using standard microbiological methods. The results revealed varying levels of microbial contamination in the poultry feeds tested. Bacterial counts ranged from 4.5 x 10^3 to 2.0 x 10^6 CFU/g, with the most prevalent bacteria being Salmonella, Escherichia coli, and Staphylococcus aureus. Fungal counts ranged from 3.0 x 10^2 to 1.5 x 10^5 CFU/g, with species of Aspergillus and Penicillium being the most common contaminants. Additionally, mycotoxins such as aflatoxins and fumonisins were detected in some of the feed samples, albeit below the regulatory limits. Further analysis indicated that the storage conditions of the poultry feeds played a significant role in the levels of microbial contamination, with feeds stored in warm and humid environments showing higher counts of bacteria and fungi. Moreover, feed ingredients such as corn and soybean meal were found to be more prone to mycotoxin contamination compared to other components. The implications of these findings on poultry health and food safety are substantial. High levels of microbial contaminants in poultry feeds can lead to various health issues in birds, including reduced growth rates, increased mortality, and susceptibility to infections. Furthermore, the presence of mycotoxins poses a potential risk not only to the poultry but also to consumers through the consumption of contaminated poultry products. In conclusion, this study highlights the importance of ensuring the microbial safety of commercial poultry feeds to maintain bird health and food safety standards. Effective monitoring and control measures, including good manufacturing practices, proper storage conditions, and regular testing for contaminants, are essential to minimize microbial risks in poultry production. Future research should focus on developing novel strategies to mitigate microbial contamination in poultry feeds and improve overall feed safety in the poultry industry.

Project Overview

INTRODUCTION

Poultry are collection of birds raised commercially or domestically for meat, egg and feathers.  Chickens, ducks turkeys and geese are of primary importance while guinea fowl and squabs (pigeons) are chiefly of local interest.  These birds are source of income and food to the rarer.  In the past only hens that could no longer produce eggs were killed and sold for meat but by the mid-20th century, meat production had outstripped egg. Production as a specialized industry (Encycloparredia Britaimca, 1988).  Heavy breed poultry animals are used for meat white light bread chickens are primarily for the production of eggs (Mc Graw Hill encydopaedia 1992).  The meat and eggs produced from poultry are important sources of dietary portion.  In Africa, animal protein foods from all sources contribute between 7g and 15g daily per person to the total food intake (Oyenyga, 1974).  Today, Poultry production in the country is increasing at a tremendous rate and yet cannot meet the demand because of population growth and the awareness created by the campaigns for the need of animal protein in the diet.

The growth and well-being of organisms are to a large extent dependent on the mount and type of food they receive and the manner or rate at which they receive it. The food should contain nutrients such  as water, carbohydrates, fats, protein, minerals, vitamins and added growth factors improper balance.  Each of these nutrients has a major role to play concerning growth, maintenance and productivity of the poultry.  According to Leonard 91981), nutritional deficiency or inbalance. These diseases may include rickets, perosis, and nutritional roup, curly the paralysis etc.  These diseases could result due to deficiency in vitamins D, Manganese, vitamin A, vitamin E and riboflavin.  Improper sanitation and inadequate management play major roles in disease.  Outbreak and productivity of the desired products.  In developing     countries like Nigeria, the cost of feeding, especially the monogastries continues to escalate primarily in response the soaring cost of the conventional feed ingredients.  This phenomenon is precipitated by under production and importation of some food stuff coupled with the competition between man and farm animal for energy and protein concentrates.

The use of agro-industrial by-products towards reducing food cost has been widely recognized (EshieH and Ademosun, 1981; Atteh and Oloagbenla, 1993). Chicken and turkeys satisfy their energy needs provided the ration a allows them to do so (Church, 1988).  The are of course exceptional to this rule particularly where heavy breed layers are concerned, when birds have a tendency to over-eat.  Where this is a problem, it is general practice to subject the birds to some degree of food restriction during the growing  and production periods. The major ingredients that are integral parts of poultry rations at the present time in the USA are corn, as the primary source of energy and soybean meal as the major protein supplement (Roland et  al    1972), while in Nigeria, Udedibie et al (1988) and Nwokon (1993) produced poultry offal meal (P.O.M) and chicken offal meal (COM) respectively from waste product similar to poultry visceral Offal (PVO) according to these authors POM has been used to replace ground nut cake in layer and broiler finisher diets and COM has been used along with  fish meat and blood meat as sources of methodize and lysine in the starter diets of lockerels.  These major ingredients, usually available in plentiful supply, allow rapid growth or high egg production with very efficient conversion.  However, corn-soy rations are deficient in some nutrients for chickens and these nutrients are normally supplied by other poultry meal.

There are different  types of feeds given to poultry brids depending on the purpose.  These different types of feeds given to poultry birds depending on the purpose.  These different types are the breeders’ starters, growers’ and layer’ feeds. The percentage of each ingredient in the feed varies depending on the type of feed. The ingredient include ground yellow corn, ground oats or barley, Alfata meat, Fish meal, Oystershell, managised salt, vitamin A, vitamin D, and coccidiostat (which is given in form and at the level recommended by the manufacturer). The different percentage of each ingredient varies depending on the kind of feed for example, ground yellow corn in starter and grower feed is 25% and 22% in breeder and layer feeds. There could be the same percentage of a particular ingredient in different feeds as in the case of a alfafa meal which constitutes 10% inall the feed types. Some ingredients could be absent in a particular feed but present in the others as in the case of riboflavin supplement which is absent in starter feed and present at the levels of 2 and 5% in rower, layer and breeder feeds respectively.

To maintain healthy birds, the feeds are kept fresh as much as possible at all times.  The amount of feed in feeders are limited to the extent necessary to avoid wastage.  It is a good practice to fill hanging feeders – only three quarter full, and trough feeders only two third full (Graham, 1977). Checking the weight of the birds and its feed consumption is very necessary.  A drop in feed intake usually is the first indication of trouble, a disease outbreak, molt, stress or poor management (Graham, 1977).  Most poultry feed are prepared in dehydrated forms and because of this, there is the need to store them properly  to avoid moisture uptake and damage by heat.  In this way,. They can remain safe for a considerable period of time without loosing their safeness and value.  The feed should be stored in a suitable place where it will not be attacked by microorganisms, insects, rodents, etc.  Air tight storage is not advisable because offensive odour might result when there is obstruction of out flow and inflow of air (Leonard, 1981).  High temperature and oxidation destroy certain vitamins, therefore, care must be taken in the  preservation and storage of feeds to protect the vitamins they contain (Mc Graw – Hill encyclopaedia 1992). The condition of feed storage and handling could be a source of contamination.  When feeds are unhysgenically handled and stored, there could be a buildup of microbial contaminants.

Poultry have been found to be susceptible to infection due to certain microorganisms and man may be secondarily infected through heavy contaminated food such as poultry meat and eggs (Gorden and Tucker, 1965, Hall, 1977, and Barrell, 1982).  Micro-organism that may contaminate feed include the following general another disease caused by salmonella infections is paratyphoid. Paratyphoid is an infection disease of chi, Entherobacter,  Escherichia,  Protens,Pseudomonas, staphylococcus, salmonella, shigella, providencia, serratia, Klebsiella,streptococcus, clostridium, Aspergillus and Erysiphelothrie (Leonard, 1981). Typically, in some countries, about 50% of all outbreaks of salmonellosis in man are caused by infections derived from these sources and the incidence of salmonella in poultry carcasses has, in certain cases been found to be 7% or more (Van schothorst Notermans, 1980).  Okongi (1984) examined poultry feed and found that salmonellawas present in the sample.  Another disease caused by salmonella infections is paratyphoid, Paratyphoid is an infections disease of chicken, turkeys, ducks and other birds.  Bofulism another kind of disease occurs in both young and adult poultry birds.  It is caused by a bacterium, Clostridium Botulinum. This organism grows in decaying plants and animals materials. Birds feeding material containing the toxins produced by the bacteria lose control of their neck muscle (Leonard, 1981).

OBJECTIVE OF THIS STUDY:

The objective of this study is to ascertain the microbial safety of commercial poultry feeds produced by companies.

AIMS OF THE STUDY

i.                   To isolate micro-organisms that are contaminants of poultry feeds.

ii.                 To identify the bacterial types

iii.              To determine the microbial load of poultry feed.

STATEMENT OF PROBLEM

Poultry feed is known to contain salmonella, and other microorganisms are also implicated in poultry feeds, (Klinger and Ladidot, 1993).  It is therefore pertinent to carry out microbiological examination of commercially prepared poultry feeds to ascertain their safety to livestock.

HYPOTHESIS HO:-  Poultry feeds are associated with bacterial contaminants H1:-   Poultry feeds are not associated with bacterial contaminants

HII:-  Poultry feeds do not have enough bacterial contaminants to cause infection in poultry

LIMITATION OF THE STUDY

This work is limited to bacteria contaminants associated with poultry feeds from three different companies.

SIGNIFICANCE OF THE STUDY

As the end of the project work, the results will be a guide to the  microbiological safety or otherwise of the commercially prepared poultry feeds.


Blazingprojects Mobile App

📚 Over 50,000 Project Materials
📱 100% Offline: No internet needed
📝 Over 98 Departments
🔍 Software coding and Machine construction
🎓 Postgraduate/Undergraduate Research works
📥 Instant Whatsapp/Email Delivery

Blazingprojects App

Related Research

Mechanical engineeri. 2 min read

Design and analysis of a solar-powered desalination system....

The project titled "Design and Analysis of a Solar-Powered Desalination System" focuses on developing a sustainable solution to address the global wat...

BP
Blazingprojects
Read more →
Mechanical engineeri. 3 min read

Design and analysis of a solar-powered desalination system for remote communities....

The project "Design and Analysis of a Solar-Powered Desalination System for Remote Communities" aims to address the pressing need for sustainable acce...

BP
Blazingprojects
Read more →
Mechanical engineeri. 3 min read

Design and Optimization of a Solar-Powered Refrigeration System...

The project topic, "Design and Optimization of a Solar-Powered Refrigeration System," focuses on the development of an innovative and sustainable cool...

BP
Blazingprojects
Read more →
Mechanical engineeri. 2 min read

Design and Optimization of a Fuel-Efficient Hybrid Electric Vehicle Powertrain...

The project on the "Design and Optimization of a Fuel-Efficient Hybrid Electric Vehicle Powertrain" aims to address the pressing need for sustainable ...

BP
Blazingprojects
Read more →
Mechanical engineeri. 3 min read

Design and development of an energy-efficient wind turbine for urban applications...

The project "Design and development of an energy-efficient wind turbine for urban applications" aims to address the growing need for sustainable energ...

BP
Blazingprojects
Read more →
Mechanical engineeri. 3 min read

Design and optimization of a novel energy-efficient HVAC system for commercial build...

The project topic, "Design and optimization of a novel energy-efficient HVAC system for commercial buildings," focuses on addressing the growing need ...

BP
Blazingprojects
Read more →
Mechanical engineeri. 4 min read

Design and analysis of an energy-efficient hydraulic system for industrial applicati...

The project on "Design and Analysis of an Energy-Efficient Hydraulic System for Industrial Applications" aims to address the growing need for sustaina...

BP
Blazingprojects
Read more →
Mechanical engineeri. 3 min read

Design and Development of an Automated Robotic Arm for Industrial Applications...

The project topic, "Design and Development of an Automated Robotic Arm for Industrial Applications," focuses on the innovative integration of robotics...

BP
Blazingprojects
Read more →
Mechanical engineeri. 4 min read

Design and optimization of an energy-efficient hybrid vehicle powertrain....

The project on "Design and optimization of an energy-efficient hybrid vehicle powertrain" focuses on addressing the growing need for sustainable trans...

BP
Blazingprojects
Read more →
WhatsApp Click here to chat with us