Home / Mechanical engineering / Bacteriological quality of frozen chicken

Bacteriological quality of frozen chicken

 

Table Of Contents


Project Abstract

<p> </p><p>Twenty samples of frozen chicken from five different sellers were analyzed to determine their bacteriological load; the samples were collected from Gwagwalada market. All the frozen chicken samples from the five sellers examined were contaminated with some bacterial species namely, <em>Bacillus cereus, Escherichia coli, Staphyloccus aureus, Staphylococcus epidermidis, Proteus vulgaris, Klebsiella pneumonia, Pseudomonas aeruginosa. </em>The total bacteria counts for all the chicken examined from the different sellers was in the range of 0.7 × 102</p><p>cfu/ml to 8.5 × 102 cfu/ml and the coliform counts obtained for all the chicken samples ranged from 0.1 × 102 cfu/ml to 3.2 × 102 cfu/ml. These finding suggest that most of the frozen chicken parts stored in the open market may constitute sources of bacterial food poisoning consequently public health hazard.</p> <br><p></p>

Project Overview

<p> </p><p><strong>1.0 &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; INTRODUCTION</strong></p><p>The first consumer right is to have a product of good quality and not constituting any health hazard. Poultry meat products are highly desirable, palatable, digestible and nutritious for all ages. Poultry meat is comprised of about 20–23% protein, other are water and fat, phosphorus, iron and vitamins. Comminuted products, such as frankfurters, bologna and sausages typically contain about 17–20% protein, 0–20% fat, and 60–80% water (Smith,2001).Quality products are those that meet some need or expectation of consumers and are safe and wholesome as well. (Sahoo<em>et al.</em>, 1996).The microbiological safety and quality of poultry meat are equally important to producers, retailers and consumers. Two quite different groups of microorganisms are relevant: on the one hand certain foodborne pathogens, and, on the other, organisms that are generally harmless to human health, but, being psychrotrophic, are able to multiply on the product during chill storage. Spoilage results mainly from off- odour development, and product shelf-life is determined both by the number of spoilage organisms present initially and the temperature history of the product at all stages of production and subsequent storage and handling (Pooni and Mead, 1984). For chill- stored poultry, Viehweg<em>et al</em>. (1989) demonstrated that virtually all the odorous substances found at spoilage could be attributed to microbial growth and metabolism. Contamination of poultry meat with foodborne pathogens remains an important public health issue, because it can lead to illness if there are malpractices in handling, cooking or post-cooking storage of the product.</p><p>Fresh (uncooked) foods such as chicken carries natural microflora that may contain organisms potentially harmful to humans. The microbial flora of table poultry is largely confined to the skin surface or visceral cavity. Isolates from poultry and poultry products could include members of the following general <em>Enterobacter, Alcaligenes, Escherichia,Bacillus, Flavobacterium, Micrococcus, Proteus,Pseudomonas, Staphylococcus, Corynebacterium</em>and <em>Salmonella. </em>(Frazier and Westhoff,1988).</p><p>Contamination of the skin and lining of the body cavity occurs during washing, plucking and evisceration. Bacterial numbers vary considerably on the surface of chickens. This variation however is greater between birds than is between different areas of the same birds. The type of organisms isolated depends upon where the samples were taken and upon the stage of processing (Frazier and Westhoff, 1988). Fresh poultry products like meat are known to undergo deterioration due to microbial action, chemical and physical changes. In normal handling and storage of poultry meat, this deterioration changes are attributed to micro biological contamination and activity.</p><p>Poultry and poultry products are frequently contaminated with several types of microorganisms. This problem is even more severe under temperature-abused conditions as well as improper or inefficient refrigeration commonly observed in retail chicken sold in open markets. Poultry can be kept in good condition for months if freezing is prompt and rapid and the storage temperature is low enough. Poultry should freeze fast enough to retain most of the natural bloom or external appearance of a freshly dressed fowl. The storage temperature should be below 17.8oC and the relative humidity above 95 percent to reduce surface drying. Most poultry is sharp-frozen at about 29oC or less in circulating air or on a moving belt in a freezing tunnel. Other spoilage micro-organisms are introduced into the poultry products by the workmen during cutting and evisceration, through water, and air in the dressing, cooling and cutting room environment (Allen<em>et al</em>., 2000). However, various methods are used in the preservation of these poultry products in order to reduce the incidence of these organisms. These include asepsis, use of heat, use of low temperature, chilling, freezing, preservatives such as acetic, adipic, succinic etc. at pH 2.5 and use irradiation (Frazier and Westhoff, 1988). Despite these methods of preservation, contamination of poultry products remains the order of the day before it gets to the final consumer.</p><p>1.2 &nbsp; <strong>AIMS AND OBJECTIVES</strong></p><p>Various bacteria are associated with poultry products; this project is aimed at achieving the following objectives:</p><p>i. &nbsp; &nbsp; &nbsp; To isolate the various microbial isolates associated with frozen chicken purchased from different sellers in Gwagwalada market.</p><p>ii. &nbsp; &nbsp; &nbsp; To characterize and identify these micro-organisms.</p><p>iii. &nbsp; &nbsp; &nbsp;To speculate on the significance of these isolates.</p><p>iv. &nbsp; &nbsp; &nbsp;To compare the level of contamination of the samples (frozen chicken) collected from different parts of the market.</p> <br><p></p>

Blazingprojects Mobile App

📚 Over 50,000 Project Materials
📱 100% Offline: No internet needed
📝 Over 98 Departments
🔍 Project Journal Publishing
🎓 Undergraduate/Postgraduate
📥 Instant Whatsapp/Email Delivery

Blazingprojects App

Related Research

Mechanical engineeri. 3 min read

Design and analysis of a solar-powered desalination system for remote communities....

The project "Design and Analysis of a Solar-Powered Desalination System for Remote Communities" aims to address the pressing need for sustainable acce...

BP
Blazingprojects
Read more →
Mechanical engineeri. 3 min read

Design and Optimization of a Solar-Powered Refrigeration System...

The project topic, "Design and Optimization of a Solar-Powered Refrigeration System," focuses on the development of an innovative and sustainable cool...

BP
Blazingprojects
Read more →
Mechanical engineeri. 2 min read

Design and Optimization of a Fuel-Efficient Hybrid Electric Vehicle Powertrain...

The project on the "Design and Optimization of a Fuel-Efficient Hybrid Electric Vehicle Powertrain" aims to address the pressing need for sustainable ...

BP
Blazingprojects
Read more →
Mechanical engineeri. 3 min read

Design and development of an energy-efficient wind turbine for urban applications...

The project "Design and development of an energy-efficient wind turbine for urban applications" aims to address the growing need for sustainable energ...

BP
Blazingprojects
Read more →
Mechanical engineeri. 3 min read

Design and optimization of a novel energy-efficient HVAC system for commercial build...

The project topic, "Design and optimization of a novel energy-efficient HVAC system for commercial buildings," focuses on addressing the growing need ...

BP
Blazingprojects
Read more →
Mechanical engineeri. 3 min read

Design and analysis of an energy-efficient hydraulic system for industrial applicati...

The project on "Design and Analysis of an Energy-Efficient Hydraulic System for Industrial Applications" aims to address the growing need for sustaina...

BP
Blazingprojects
Read more →
Mechanical engineeri. 2 min read

Design and Development of an Automated Robotic Arm for Industrial Applications...

The project topic, "Design and Development of an Automated Robotic Arm for Industrial Applications," focuses on the innovative integration of robotics...

BP
Blazingprojects
Read more →
Mechanical engineeri. 2 min read

Design and optimization of an energy-efficient hybrid vehicle powertrain....

The project on "Design and optimization of an energy-efficient hybrid vehicle powertrain" focuses on addressing the growing need for sustainable trans...

BP
Blazingprojects
Read more →
Mechanical engineeri. 4 min read

Design and Optimization of a Solar-Powered Cooling System for Automotive Application...

The project "Design and Optimization of a Solar-Powered Cooling System for Automotive Applications" focuses on the development of an innovative coolin...

BP
Blazingprojects
Read more →
WhatsApp Click here to chat with us