Home / Industrial and Production Engineering / A case of study of a concentrating solar power plant with unfired Joule-Brayton cycle

A case of study of a concentrating solar power plant with unfired Joule-Brayton cycle

 

Table Of Contents


Chapter ONE

1.1 Introduction
1.2 Background of the Study
1.3 Problem Statement
1.4 Objective of the Study
1.5 Limitation of Study
1.6 Scope of Study
1.7 Significance of Study
1.8 Structure of the Research
1.9 Definition of Terms

Chapter TWO

2.1 Overview of Concentrating Solar Power Plants
2.2 History of Solar Power Technologies
2.3 Joule-Brayton Cycle in Power Generation
2.4 Advantages of Concentrating Solar Power Plants
2.5 Challenges in Implementing CSP with Unfired Joule-Brayton Cycle
2.6 Economic Viability of CSP Projects
2.7 Environmental Impact of CSP Plants
2.8 Technological Innovations in CSP
2.9 Global Trends in CSP Development
2.10 Future Prospects of CSP Technology

Chapter THREE

3.1 Research Design and Approach
3.2 Data Collection Methods
3.3 Sampling Techniques
3.4 Research Instrumentation
3.5 Data Analysis Procedures
3.6 Ethical Considerations
3.7 Validity and Reliability
3.8 Limitations of the Methodology

Chapter FOUR

4.1 Overview of Research Findings
4.2 Analysis of Data Collected
4.3 Comparison of Results with Literature Review
4.4 Interpretation of Findings
4.5 Implications of the Results
4.6 Recommendations for Future Research
4.7 Practical Applications of the Findings
4.8 Areas for Further Investigation

Chapter FIVE

5.1 Summary of Research
5.2 Conclusions Drawn
5.3 Contributions to Knowledge
5.4 Practical Implications
5.5 Recommendations for Industry
5.6 Suggestions for Policy Makers
5.7 Reflections on the Research Process
5.8 Future Research Directions

Project Abstract

                  ABSTRACT

A solar closed air Brayton cycle, with rated power of 50 MW, was considered. The system is composed of a concentrating solar tower with volumetric receiver, an intercooling and regenerating gas turbine and an evaporative tower cooling system. The characteristic feature of the system is a control strategy able to adjust the plant in a large range of load, maintaining net electric conversion efficiency almost constant. The concentrating solar power (CSP) plant operates without adding fuel and can heat air up to a maximum temperature of 850 °C, at the solar tower outlet. The numerical analysis was performed by SAM for the solar tower and by Thermoflex © for the assessment of the performance of the whole system. The thermal energy input was calculated on the basis of the DNI of the TMY from Seville. Results show an electricity production greater than 75GWh per year, with a significant sparing fossil fuel consumption and avoided CO2 emissions.

Project Overview

1.0 INTRODUCTION

1.1 BACKGROUND STUDY 

The solar source, as known, is not a resource that ensures regularity of energy production; consequently, its random nature leads to the search of systems able to capture the incident energy on the terrestrial sphere in an effective and continuous manner. A particular category of systems that are suitable for this application and are currently being developed in installations at an experimental stage [1] [7], or in certain cases also commercial [2] are known as concentrating solar Brayton cycle. They are promising in term of efficiency, low emissions and limited consumption of cooling water.

To compensate the lack of thermal power during the clouds transient, generally in this kind of systems fuel is used by combustors to make always at nominal values the operating point. In this article the possibility of combining an innovative control system for a solar concentrator closed intercooled regenerated Brayton cycle, is analysed. Among the expected benefits of such a system, there is a good energy yield, which is almost constant regardless of the intensity of solar radiation, without the emission of greenhouse gases. This technology, in fact, avoids the use of combustors, and thus it increases the heat energy from fossil fuels, ensuring, at the same time, a large margin of regulation 

  Nomenclature 

 Product of heat exchange coefficient global for the exchange surface 

Avg  Average value calculate for every months Opt 

Opt  Optimal value i Represent the number of the month on thesum ܲ 

P. Average pressure of the air on cycle 

Vc  Volume control MW Molecular weight of the air 

R  Universal constant of ideal gases 

T  Average temperature of the air in the principal cycle 

TIT  Temperature Intel Turbin

Blazingprojects Mobile App

📚 Over 50,000 Project Materials
📱 100% Offline: No internet needed
📝 Over 98 Departments
🔍 Software coding and Machine construction
🎓 Postgraduate/Undergraduate Research works
📥 Instant Whatsapp/Email Delivery

Blazingprojects App

Related Research

Industrial and Produ. 3 min read

Optimization of Production Line Layout using Simulation Techniques in an Automotive ...

The project titled "Optimization of Production Line Layout using Simulation Techniques in an Automotive Manufacturing Plant" focuses on enhancing the ...

BP
Blazingprojects
Read more →
Industrial and Produ. 3 min read

Optimization of production scheduling using advanced algorithms in a manufacturing e...

The project topic, "Optimization of production scheduling using advanced algorithms in a manufacturing environment," focuses on enhancing the efficien...

BP
Blazingprojects
Read more →
Industrial and Produ. 3 min read

Application of Lean Six Sigma in Improving Manufacturing Processes in the Automotive...

The project topic, "Application of Lean Six Sigma in Improving Manufacturing Processes in the Automotive Industry," focuses on the implementation of L...

BP
Blazingprojects
Read more →
Industrial and Produ. 3 min read

Optimization of Manufacturing Processes using Artificial Intelligence Techniques in ...

The project topic "Optimization of Manufacturing Processes using Artificial Intelligence Techniques in Industrial and Production Engineering" focuses ...

BP
Blazingprojects
Read more →
Industrial and Produ. 2 min read

Implementation of Lean Six Sigma in a Manufacturing Process for Quality Improvement ...

The project topic, "Implementation of Lean Six Sigma in a Manufacturing Process for Quality Improvement and Waste Reduction," focuses on the applicati...

BP
Blazingprojects
Read more →
Industrial and Produ. 4 min read

Optimization of Production Line Layout Using Simulation Techniques in a Manufacturin...

The project topic "Optimization of Production Line Layout Using Simulation Techniques in a Manufacturing Industry" aims to address the critical aspect...

BP
Blazingprojects
Read more →
Industrial and Produ. 3 min read

Optimization of Production Scheduling in a Manufacturing Environment using Machine L...

The project "Optimization of Production Scheduling in a Manufacturing Environment using Machine Learning Algorithms" aims to address the challenges fa...

BP
Blazingprojects
Read more →
Industrial and Produ. 2 min read

Implementation of Lean Six Sigma in a Manufacturing Industry to Improve Production E...

The project topic "Implementation of Lean Six Sigma in a Manufacturing Industry to Improve Production Efficiency" focuses on the integration of Lean S...

BP
Blazingprojects
Read more →
Industrial and Produ. 3 min read

Implementation of Lean Manufacturing Techniques in a Manufacturing Company to Improv...

The project topic "Implementation of Lean Manufacturing Techniques in a Manufacturing Company to Improve Productivity and Quality" focuses on the appl...

BP
Blazingprojects
Read more →
WhatsApp Click here to chat with us