Home / Computer Science / Computer networking using wirless network

Computer networking using wirless network

 

Table Of Contents


Chapter ONE

1.1 Introduction
1.2 Background of Study
1.3 Problem Statement
1.4 Objective of Study
1.5 Limitation of Study
1.6 Scope of Study
1.7 Significance of Study
1.8 Structure of the Research
1.9 Definition of Terms

Chapter TWO

2.1 Overview of Wireless Networks
2.2 History of Wireless Networking
2.3 Types of Wireless Networks
2.4 Wireless Network Components
2.5 Wireless Network Security
2.6 Wireless Network Protocols
2.7 Wireless Network Standards
2.8 Wireless Network Performance
2.9 Challenges in Wireless Networking
2.10 Future Trends in Wireless Networking

Chapter THREE

3.1 Research Design
3.2 Sampling Methods
3.3 Data Collection Techniques
3.4 Data Analysis Procedures
3.5 Research Ethics
3.6 Research Validity
3.7 Research Reliability
3.8 Research Limitations

Chapter FOUR

4.1 Data Analysis and Interpretation
4.2 Comparison of Findings
4.3 Discussion on Research Results
4.4 Implications of Findings
4.5 Recommendations for Future Research
4.6 Practical Applications of Findings
4.7 Conclusion on Research Findings
4.8 Contributions to Existing Knowledge

Chapter FIVE

5.1 Summary of Findings
5.2 Conclusion and Implications
5.3 Recommendations for Practice
5.4 Recommendations for Policy
5.5 Contributions to the Field
5.6 Suggestions for Future Research

Project Abstract

Abstract
Wireless computer networking has become an integral part of our daily lives, enabling connectivity and communication across various devices without the constraints of physical cables. This research project focuses on exploring the intricacies of computer networking using wireless networks. The primary objective is to analyze the advancements, challenges, and future prospects of wireless networking technologies. The study delves into the fundamental principles of wireless networking, including the different types of wireless networks such as Wi-Fi, Bluetooth, and cellular networks. It examines the architecture and components of wireless networks, emphasizing the role of access points, routers, and wireless devices in establishing connectivity. The project also investigates the protocols and standards governing wireless communication, such as IEEE 802.11 for Wi-Fi and Bluetooth SIG for Bluetooth devices. Furthermore, the research project highlights the security considerations in wireless networking, addressing potential vulnerabilities and encryption mechanisms to safeguard data transmission. It discusses the importance of implementing robust security measures, including encryption algorithms, firewall protection, and network access control, to mitigate security risks in wireless networks. Moreover, the study explores the applications and use cases of wireless networking in various sectors, including home automation, healthcare, transportation, and industrial IoT. It examines how wireless networks facilitate seamless connectivity for smart devices, sensors, and autonomous systems, enabling real-time data exchange and remote monitoring capabilities. The research project also investigates the performance optimization techniques for wireless networks, focusing on aspects such as signal strength, bandwidth management, and quality of service (QoS) enhancements. It explores the challenges related to network congestion, signal interference, and bandwidth limitations, proposing solutions to improve network efficiency and reliability. In conclusion, this research project provides a comprehensive analysis of computer networking using wireless networks, highlighting the technological advancements, security considerations, and applications of wireless communication. By understanding the complexities of wireless networking technologies, stakeholders can make informed decisions regarding network design, implementation, and optimization strategies. The findings of this study contribute to the existing body of knowledge in the field of wireless networking, offering insights into the future developments and innovations in wireless communication systems.

Project Overview

  INTRODUCTION

1.1   BACKGROUND TO THE STUDY

        A computer network or data network is a telecommunications network which allows computers to exchange data. In computer networks, networked computing devices pass data to each other along network links (data connections). The connections between nodes are established using either cable media or wireless media. The best-known computer network is the Internet (Wikipedia, 2015).

        Network computer devices that originate, route and terminate the data are called network nodes. Nodes can include hosts such as personal computers, phones, servers as well as networking hardware. Two such devices can be said to be networked together when one device is able to exchange information with the other device, whether or not they have a direct connection to each other (Geier, 2001).

        Computer networks differ in the transmission media used to carry their signals, the communications protocols to organize network traffic, the network’s size, topology and organizational intent. In most cases, communications protocols are layered on (i.e. work using) other more specific or more general communications protocols, except for the physical layer that directly deals with the transmission media. Computer networks support applications such as access to the World Wide Web, shared use of application and storage servers, printers, and fax machines, and use of email and instant messaging applications (Wikipedia, 2015).

        A wireless network is any type of computer network that uses wireless data connections for connecting network nodes. Wireless networking is a method by which homes, telecommunications networks and enterprise (business) installations avoid the costly process of introducing cables into a building, or as a connection between various equipment locations. Wireless telecommunications networks are generally implemented and administered using radio communication. This implementation takes place at the physical level (layer) of the OSI model network structure. Examples of wireless networks include cell phone networks, Wi-Fi local networks and terrestrial microwave networks.

Wireless media uses the antennas for sending and receiving the electromagnetic waves without using any physical conductors. Radio frequencies (RF) are generated by antennas that propagate the waves into the air. According to Molisch (2005), antennas for wireless transmission can be fall under two different categories:

–     Directional antennas: Directional antennas are commonly used in point-to-point configurations connecting two distant buildings LANs, and sometimes point-to-multipoint (connecting two WLANs). In this, sending and receiving antenna must be properly aligned for proper transmission. An example of a directional antenna is a Yagi antenna: this antenna allows you to adjust the direction and focus of the signal to strengthen the range/reach.

–     Omni-directional antennas: Omni-directional antennas are used in point-to multi-point configurations, where they distribute the wireless signal to other computers or devices in WLAN. An access point would use an Omni-directional antenna. These antennas can also be used for point-to-point connections. In this, signal is spread in all directions and can be received by any antenna which is compatible to receive the signals.

However, this study is aimed at providing an overview on computer networking with specific emphasis on wireless network

STATEMENT OF THE PROBLEM

Wireless network is a network through which data signals flow through the air. It’s useful for people to communicate and access applications and information without wires (Rappaport, 2002). It allows people to interact with e-mail or browse the Internet from a location that they prefer. Wireless networks are not bound to a channel to follow like wired networks. Wireless networking is less expensive and much easier to install than more traditional wired networking. Wireless networking is used at the airport, or in hotel lobbies, and a small office or home network etc. The transmitted distance can be anywhere between a few meters as a television’s remote control and thousands of kilometers as radio communication.

Wireless network uses the antennas for sending and receiving the electromagnetic waves without using any physical conductors. Radio frequencies (RF) are generated by antennas that propagate the waves into the air (Rhoton, 2001). A detailed overview of wireless network will be highlighted in this study.

1.3   OBJECTIVES OF THE STUDY

The following are the objectives of this study:

1. To provide an overview on wireless network

2. To examine the different types of wireless network

3. To determine the structure and components of a wireless network

4. To analyze the advantages of wireless network

1.4   RESEARCH QUESTIONS

1. What is a wireless network?

2. What are the different types of wireless network?

3. What are the structure and components of a wireless network?

4. What are the advantages of wireless network?

1.6   SIGNIFICANCE OF THE STUDY

This study on the computer networking using wireless network has the following significance:

1. It will educate the general public on the details about computer networking with more emphasis on wireless network. It will also familiarize students and the general public about the structure and components of wireless network and most importantly the various types of wireless networks that exists.

2. This research will be a contribution to the body of literature in the area of the relationship between performance assessment and investment decision, thereby constituting the empirical literature for future research in the subject area.

1.7   SCOPE OF THE STUDY

This study on computer networking using wireless network will provide an overview of computer networking with more emphasis on wireless networks. It will also cover all the types of wireless network that exists, structure and components of the wireless network.

1.8   DEFINITION OF TERMS

Computer: an electronic device which is capable of receiving information (data) in a particular form and of performing a sequence of operations in accordance with a predetermined but variable set of procedural instructions (program) to produce a result in the form of information or signals.

Networking: connection of computers together in order to make them share information

Internet: a global computer network providing a variety of information and communication facilities, consisting of interconnected networks using standardized communication protocols

Communication: the imparting or exchanging of information by speaking, writing, or using some other medium.

Wireless network: wireless is the term used to describe any computer network where there is no physical wired connection between sender and receiver, but rather the network is connected by radio waves and/or microwaves to maintain communications.

REFERENCES

Geier, J. (2001). Wireless LANs. Sams;. ISBN 0-672-32058-4.

Molisch, A. (2005). Wireless Communications. Wiley-IEEE Press. ISBN 0-470-84888-X.

Rappaport, T. (2002). Wireless Communications: Principles and Practice. Prentice Hall. ISBN 0-13-042232-0.

Rhoton, J. (2001). The Wireless Internet Explained. Digital Press. ISBN 1-55558-257-5.

Kostas P. (2005). “Wireless Data Networks”. Internet Protocol Journal 8 (1). Retrieved 29 August 2011.

Wikipedia (2015): www.wikipedia.com



Blazingprojects Mobile App

📚 Over 50,000 Project Materials
📱 100% Offline: No internet needed
📝 Over 98 Departments
🔍 Software coding and Machine construction
🎓 Postgraduate/Undergraduate Research works
📥 Instant Whatsapp/Email Delivery

Blazingprojects App

Related Research

Computer Science. 3 min read

Predicting Disease Outbreaks Using Machine Learning and Data Analysis...

The project topic, "Predicting Disease Outbreaks Using Machine Learning and Data Analysis," focuses on utilizing advanced computational techniques to ...

BP
Blazingprojects
Read more →
Computer Science. 3 min read

Implementation of a Real-Time Facial Recognition System using Deep Learning Techniqu...

The project on "Implementation of a Real-Time Facial Recognition System using Deep Learning Techniques" aims to develop a sophisticated system that ca...

BP
Blazingprojects
Read more →
Computer Science. 2 min read

Applying Machine Learning for Network Intrusion Detection...

The project topic "Applying Machine Learning for Network Intrusion Detection" focuses on utilizing machine learning algorithms to enhance the detectio...

BP
Blazingprojects
Read more →
Computer Science. 3 min read

Analyzing and Improving Machine Learning Model Performance Using Explainable AI Tech...

The project topic "Analyzing and Improving Machine Learning Model Performance Using Explainable AI Techniques" focuses on enhancing the effectiveness ...

BP
Blazingprojects
Read more →
Computer Science. 3 min read

Applying Machine Learning Algorithms for Predicting Stock Market Trends...

The project topic "Applying Machine Learning Algorithms for Predicting Stock Market Trends" revolves around the application of cutting-edge machine le...

BP
Blazingprojects
Read more →
Computer Science. 3 min read

Application of Machine Learning for Predictive Maintenance in Industrial IoT Systems...

The project topic, "Application of Machine Learning for Predictive Maintenance in Industrial IoT Systems," focuses on the integration of machine learn...

BP
Blazingprojects
Read more →
Computer Science. 4 min read

Anomaly Detection in Internet of Things (IoT) Networks using Machine Learning Algori...

Anomaly detection in Internet of Things (IoT) networks using machine learning algorithms is a critical research area that aims to enhance the security and effic...

BP
Blazingprojects
Read more →
Computer Science. 2 min read

Anomaly Detection in Network Traffic Using Machine Learning Algorithms...

Anomaly detection in network traffic using machine learning algorithms is a crucial aspect of cybersecurity that aims to identify unusual patterns or behaviors ...

BP
Blazingprojects
Read more →
Computer Science. 3 min read

Predictive maintenance using machine learning algorithms...

Predictive maintenance is a proactive maintenance strategy that aims to predict equipment failures before they occur, thereby reducing downtime and maintenance ...

BP
Blazingprojects
Read more →
WhatsApp Click here to chat with us