Preparation of soap using different types of oils and exploring it's properties
Table Of Contents
<p> </p><p>
Chapter 1
</p><p>Introduction</p><p>Chapter 2
</p><p>Literature Review</p><p>2.1</p><p>Semi Boiled Process</p><p>2.2</p><p>Full Boiled</p><p>2.3</p><p>Cold Process</p><p>2.4</p><p>Different types of soap making oils</p><p>2.5</p><p>Castor Oil</p><p>2.6</p><p>Olive Oil</p><p>2.7</p><p>Neem Oil</p><p>3.1</p><p>Coconut Oil</p><p>Chapter 3
</p><p>Materials and Methods</p><p>3.1</p><p>Materials Required</p><p>3.2</p><p>Methodology</p><p>3.2.1</p><p>Preparation of Soap</p><p>3.2.2</p><p>Comparing different</p><p>properties of soap with detergent</p><p>3.2.3</p><p>Blending of Oils</p><p>3.2.4</p><p>Calculation of TFM</p><p>3.2.5</p><p>Calculation of free alkali</p><p>3.2.6</p><p>Analysis of the best blend</p><p>3.2.7</p><p>Saponification Value</p><p>3.2.8</p><p>Iodine Value</p><p>3.2.9</p><p>Unsaponifiable Matter</p><p>3.2.10</p><p>Acid Value</p><p>Chapter 4
</p><p>Results and Discussion</p><p>4.1</p><p>Comparison of soap and detergent</p><p>4.2</p><p>Properties of soap after blending of oils</p><p>4.3</p><p>TFM values of soaps</p><p>4.4</p><p>Analysis of the best blend</p><p>4.5</p><p>Saponification Values</p><p>4.5</p><p>Iodine Values</p><p>4.6</p><p>Unsaponifiable Matter</p><p>4.7</p><p>Acid Value</p><p>Chapter 5
</p><p>Conclusion</p><p>Chapter 6</p><p>References</p><p><strong>List of Tables</strong></p><p>Sl.no.</p><p>Name of the table</p><p>Page</p><p>no.</p><p>1</p><p>Composition of coconut oil</p><p>13</p><p>2</p><p>Yield of soap using individual oils</p><p>23</p><p>3</p><p>Properties of soap versus detergent</p><p>23</p><p>4</p><p>Moisture and Hardness of soap samples from</p><p>24</p><p>individual oils</p><p>5</p><p>Yield and pH values of soap samples from blending of</p><p>24</p><p>oils</p><p>6</p><p>Lathering and cleansing power of soap samples from</p><p>25</p><p>blending of oils</p><p>7</p><p>Moisture and Hardness of soap samples from blending</p><p>26</p> <br><p></p>Project Abstract
Soaps are the sodium salts or potassium salts of stearic acids or any other fatty acids. They are prepared by the saponification process, which is, reacting the oil which contain triglycerides with caustic soda (NaOH) to give the soap. However different oils have different composition of fatty acids which are responsible for different properties of soaps made out of them. In the present work 5 different types of oils are taken. They are blended in various ratios to prepare 14 different samples of soap. Different properties of these samples were analyzed to see which soap is the best one. The cleansing and lathering properties of all samples were compared. The blend of coconut oil and castor oil at 31 ratio is found out to be the best with 76.8% of TFM and 89.46% of yield. The best blend is analyzed for various properties and they were compared with that given in the literature. The saponification values, iodine values of coconut oil and castor oil were found out and these values were also found for the blend. It was found that the blend was having SAP value of 230.4 and iodine value of 40 which are higher than the individual values. Thus soap prepared using blend of both these oils has better properties than the soaps prepared by individual oils.
Project Overview
Blazingprojects Mobile App
📚 Over 50,000 Project Materials
📱 100% Offline: No internet needed
📝 Over 98 Departments
🔍 Software coding and Machine construction
🎓 Postgraduate/Undergraduate Research works
📥 Instant Whatsapp/Email Delivery
Related Research
Design and Optimization of a Chemical Process for Sustainable Production of Biofuels...
The project "Design and Optimization of a Chemical Process for Sustainable Production of Biofuels" focuses on developing an efficient and environmenta...
Optimization of Biofuel Production from Algae...
The project on "Optimization of Biofuel Production from Algae" focuses on exploring innovative strategies to maximize the efficiency of biofuel produc...
Design and Optimization of a Novel Chemical Process for Sustainable Energy Productio...
The project topic "Design and Optimization of a Novel Chemical Process for Sustainable Energy Production" focuses on the development of an innovative ...
Design and Optimization of a Bioreactor for Production of Biofuels...
The project topic "Design and Optimization of a Bioreactor for Production of Biofuels" focuses on the development of an innovative system for the prod...
Optimization of Bioreactor Design for Production of Bioethanol from Agricultural Was...
The project on "Optimization of Bioreactor Design for Production of Bioethanol from Agricultural Waste" aims to address the growing need for sustainab...
Optimization of Biogas Production from Food Waste through Anaerobic Digestion...
The project topic "Optimization of Biogas Production from Food Waste through Anaerobic Digestion" focuses on the sustainable conversion of food waste ...
Optimization of Biodiesel Production Using Microalgae as Feedstock...
The project topic, "Optimization of Biodiesel Production Using Microalgae as Feedstock," focuses on the sustainable production of biodiesel, a renewab...
Optimization of Waste Water Treatment Processes using Advanced Chemical Engineering ...
The project topic "Optimization of Waste Water Treatment Processes using Advanced Chemical Engineering Techniques" focuses on enhancing the efficiency...
Design and Optimization of a Sustainable Process for Bioethanol Production from Agri...
The project topic "Design and Optimization of a Sustainable Process for Bioethanol Production from Agricultural Waste" focuses on the development of a...
