Home / Electrical electronics engineering / An assessment of embedded power generation in nigeria

An assessment of embedded power generation in nigeria

 

Table Of Contents


Thesis Abstract

<p> In the last decades, the power industry has had a gradual and steady change from the centralized bulk system (grid) where power is injected to the transmission network from generator to a more decentralized system where power is injected directly to a distribution network (embedded generation). Nigeria is not left out in this trend. In this assessment study, the Siemens’ PSS/E software is used to run the Newton-Raphson load flow program to see the effect of EG on loss reduction and voltage profile improvement while comparing the results obtained with the installation of the traditional network compensators alongside their impact on network (element) loading. Furthermore, the load factor and EG level of penetration are determined via mathematical methods. This work shows that EG can reduce the Nigerian transmission network loss by 7% and a section-cut of it; the (Port Harourt) PH Mains network loss to 5.51% from 9.97%. The work further shows that EG improves the per unit (p.u.) voltage of a network especially at the buses directly connected to it as observed from buses 13(0.914 to 1.02 p.u.) and 14 (0.93t7 to 1.02 p.u.) of the transmission network considered. Similarly, EG greatly improved the overall voltage profile of the Port Harcourt Mains T/S 132/33kV with all bus voltages falling within the statutory voltage profile range (0.95 p.u. to 1.05 p.u.) except the Rumuodumaya Bus that improved from 0.8pu to 0.93pu. A comparison of the network performance with EG and with Fixed Shunt Compensation gives EG a better recommendation in the light of loss reduction, voltage profile improvement capabilities. Also more efficient consumption of power by consumers are achieved with the EG in operation as seen in the Load Factor studies. At a penetration of 14.76%, the EG has a positive effect on the overall network performance which has to be monitored as the level of penetration increases, so as to mitigate the impact on the technical losses of the network. <br></p>

Thesis Overview

Blazingprojects Mobile App

📚 Over 50,000 Project Materials
📱 100% Offline: No internet needed
📝 Over 98 Departments
🔍 Project Journal Publishing
🎓 Undergraduate/Postgraduate
📥 Instant Whatsapp/Email Delivery

Blazingprojects App

Related Research

Electrical electroni. 2 min read

Design and implementation of a smart grid system for efficient energy management...

The project on the "Design and Implementation of a Smart Grid System for Efficient Energy Management" aims to address the growing need for sustainable...

BP
Blazingprojects
Read more →
Electrical electroni. 4 min read

Design and Implementation of a Smart Home Automation System Using Internet of Things...

The project titled "Design and Implementation of a Smart Home Automation System Using Internet of Things (IoT) Technology" aims to explore the integra...

BP
Blazingprojects
Read more →
Electrical electroni. 4 min read

Design and implementation of a smart home energy management system using Internet of...

The project titled "Design and implementation of a smart home energy management system using Internet of Things (IoT) technology" aims to address the ...

BP
Blazingprojects
Read more →
Electrical electroni. 4 min read

Design and implementation of real-time power monitoring system using IoT technology ...

The project titled "Design and Implementation of Real-Time Power Monitoring System Using IoT Technology for Smart Homes" focuses on the development of...

BP
Blazingprojects
Read more →
Electrical electroni. 4 min read

Design and Implementation of Power Factor Correction Circuit for Residential Applica...

The project on "Design and Implementation of Power Factor Correction Circuit for Residential Applications" aims to address the issue of power factor i...

BP
Blazingprojects
Read more →
Electrical electroni. 3 min read

Design and Implementation of a Smart Grid System Using IoT Technology in a Local Pow...

The project "Design and Implementation of a Smart Grid System Using IoT Technology in a Local Power Distribution Network" aims to revolutionize the tr...

BP
Blazingprojects
Read more →
Electrical electroni. 3 min read

Design and Implementation of an IoT-based Home Energy Management System...

The project titled "Design and Implementation of an IoT-based Home Energy Management System" aims to address the growing demand for efficient energy m...

BP
Blazingprojects
Read more →
Electrical electroni. 4 min read

Design and implementation of a smart home system using Internet of Things (IoT) tech...

The project titled "Design and implementation of a smart home system using Internet of Things (IoT) technology" aims to revolutionize the way homes ar...

BP
Blazingprojects
Read more →
Electrical electroni. 3 min read

Design and Implementation of a Smart Grid System for Renewable Energy Integration...

The research project titled "Design and Implementation of a Smart Grid System for Renewable Energy Integration" aims to address the growing need for s...

BP
Blazingprojects
Read more →
WhatsApp Click here to chat with us