Home / Chemical engineering / Formulation and production of levera soap

Formulation and production of levera soap

 

Table Of Contents


Thesis Abstract

<p> </p><p>The production of the soap was carried out using all the necessary equipments like the reactor, mould, stirrer, hygrometer guage etc. and all the required reagents for soap production in correct proportion.</p><p>In the production, palm kernel oil (P.K.O) was used instead of tallow or grease. This was because soap produced from grease or tallow tends to dissolve slowly at room temperature, whereas, soap of palm kernel oil product gives a quicker lather which is relatively suitable.</p><p>Different formulation were developed, but the most appropriate was the ratio 21 of P.K.O to caustic soda solution. This ratio gave a very quality soap. The other formulation are 31 and 11 of good quality and physically, they were observed to be brittle.</p><p>The test and analysis carried out on the P.K.O and the soap produced proved that the saponification value of the P.K.O was 248.24; refractive index was 1.451, free fatty value of 1.58; acid value of 4.43; moisture content of 26.78%; free alkali of 0.214%, alcohol insoluble matter of 1.43% and PH value of 9.98 at a temperature reading 2980c. The soap was moderately soft and very soluble in water.</p><p>The quality of soap produced conformed to all the requirements for toilet soap from Standard Organization of Nigeria (SON). It was found out that the soap has no inferiors effect on the skin; does not contain any visible foreign matter which means that the soap was properly mixed, does not encourage microbial growth and lathers effectively.</p><p>It was also found that the cost of producing the herbal/medicated or antiseptic soap was N63.00k compared to that sold in the market for N100.00k per tablet. Thus, the production based on the research work was profitable and more economical.</p> <br><p></p>

Thesis Overview

<p> </p><p>The production of the soap was carried out using all the necessary equipments like the reactor, mould, stirrer, hygrometer guage etc. and all the required reagents for soap production in correct proportion.</p><p>In the production, palm kernel oil (P.K.O) was used instead of tallow or grease. This was because soap produced from grease or tallow tends to dissolve slowly at room temperature, whereas, soap of palm kernel oil product gives a quicker lather which is relatively suitable.</p><p>Different formulation were developed, but the most appropriate was the ratio 2:1 of P.K.O to caustic soda solution. This ratio gave a very quality soap. The other formulation are 3:1 and 1:1 of good quality and physically, they were observed to be brittle.</p><p>The test and analysis carried out on the P.K.O and the soap produced proved that the saponification value of the P.K.O was 248.24; refractive index was 1.451, free fatty value of 1.58; acid value of 4.43; moisture content of 26.78%; free alkali of 0.214%, alcohol insoluble matter of 1.43% and PH value of 9.98 at a temperature reading 2980c. The soap was moderately soft and very soluble in water.</p><p>The quality of soap produced conformed to all the requirements for toilet soap from Standard Organization of Nigeria (SON). It was found out that the soap has no inferiors effect on the skin; does not contain any visible foreign matter which means that the soap was properly mixed, does not encourage microbial growth and lathers effectively.</p><p>It was also found that the cost of producing the herbal/medicated or antiseptic soap was N63.00k compared to that sold in the market for N100.00k per tablet. Thus, the production based on the research work was profitable and more economical.</p> <br><p></p>

Blazingprojects Mobile App

📚 Over 50,000 Project Materials
📱 100% Offline: No internet needed
📝 Over 98 Departments
🔍 Project Journal Publishing
🎓 Undergraduate/Postgraduate
📥 Instant Whatsapp/Email Delivery

Blazingprojects App

Related Research

Chemical engineering. 3 min read

Design and Optimization of a Sustainable Process for Biodiesel Production from Waste...

The project titled "Design and Optimization of a Sustainable Process for Biodiesel Production from Waste Cooking Oil" aims to address the significant ...

BP
Blazingprojects
Read more →
Chemical engineering. 2 min read

Optimization of Chemical Reactor Design for Sustainable Production Processes...

The project titled "Optimization of Chemical Reactor Design for Sustainable Production Processes" aims to address the critical need for sustainable pr...

BP
Blazingprojects
Read more →
Chemical engineering. 3 min read

Optimization of Bioreactor Design for Enhanced Production of Biofuels...

The research project, titled "Optimization of Bioreactor Design for Enhanced Production of Biofuels," aims to address the growing demand for sustainab...

BP
Blazingprojects
Read more →
Chemical engineering. 3 min read

Optimization of Biogas Production from Food Waste through Anaerobic Digestion...

The project titled "Optimization of Biogas Production from Food Waste through Anaerobic Digestion" aims to address the pressing need for sustainable w...

BP
Blazingprojects
Read more →
Chemical engineering. 2 min read

Design and Optimization of a Chemical Process for Renewable Energy Production...

The project titled "Design and Optimization of a Chemical Process for Renewable Energy Production" aims to address the growing global demand for susta...

BP
Blazingprojects
Read more →
Chemical engineering. 2 min read

Optimization of a Chemical Reactor System for Enhanced Efficiency and Sustainability...

The project titled "Optimization of a Chemical Reactor System for Enhanced Efficiency and Sustainability" aims to address the critical need for improv...

BP
Blazingprojects
Read more →
Chemical engineering. 4 min read

Optimization of Bioreactor Design for Enhanced Production of Biofuels...

The project titled "Optimization of Bioreactor Design for Enhanced Production of Biofuels" aims to address the increasing demand for sustainable energ...

BP
Blazingprojects
Read more →
Chemical engineering. 2 min read

Optimization of a Chemical Process Using Artificial Intelligence Techniques...

The project titled "Optimization of a Chemical Process Using Artificial Intelligence Techniques" aims to explore the application of artificial intelli...

BP
Blazingprojects
Read more →
Chemical engineering. 3 min read

Design and Optimization of a Sustainable Biorefinery for Biofuel Production...

The project titled "Design and Optimization of a Sustainable Biorefinery for Biofuel Production" aims to address the growing need for sustainable ener...

BP
Blazingprojects
Read more →
WhatsApp Click here to chat with us